Eizo FlexScan HD2442W User manual

Important
Please read PRECAUTIONS, this User’s
Manual and Setup Manual (separate volume)
carefully to familiarize yourself with safe and
effective usage.
How to Use Remote Control
The following setting and adjustments are available with remote
control. For the details on the usages, please read the Remote
Control Guide (separate volume).
- Off Timer Setting
- Color Mode Changing
- Screen Size Changing
- (When displaying game images)
Screen Size Changing/“Thru Mode” Setting
- USB Setting Changing
- Volume Adjustment/Muting
- Input Signal Switching
- PinP (Picture in Picture) Display
How to Setup
Please read the Setup Manual (separate volume).
The latest User's Manual is available for
download from our site:
http://www.eizo.com
Notice for this monitor
CONTENTS
Chapter 1 Features and Overview
1-1 Features
1-2 Names of Switches
1-3 Operation Switch Usage
1-4 Functions of Remote Control Buttons
1-5 Functions and Basic Operation
Chapter 2 Settings and Adjustment
2-1 Input Signal Switching
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Sound Adjustment
2-5 Auto Screen Size Changing
2-6 Screen Ratio Changing
2-7 Monitor Power-saving Mode Setting
2-8 Power Indicator/EIZO Logo Display Setting
2-9 Beeper Setting
2-10 Information Checking
2-11 Language Setting to be displayed
2-12 Locking Switches
2-13 Resumption of Default Settings
Chapter 3 Troubleshooting
Chapter 4 Reference
4-1 Attaching an Arm
4-2 Specications
4-3 Glossary
4-4 Preset Timing

As an ENERGY STAR®Partner, EIZO NANAO CORPORATION has determined that this product
meetstheENERGYSTARguidelinesforenergyefciency.
Using the special functions, such as screen size change (ex. changing the horizontal and vertical ratio of images input)
for commercial purposes or for the purpose of showing in public may violate copyright laws.
Productspecicationmayvarywithsalesareas.
Conrmthespecicationinthemanualwritteninlanguageoftheregionofpurchase.
Copyright© 2008 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZONANAOCORPORATIONisundernoobligationtoholdanysubmittedmaterialorinformationcondential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitorspecicationsaresubjecttochangewithoutnotice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
VESA is a registered trademark of Video Electronics Standards Association.
Windows and Xbox 360 are registered trademarks of Microsoft Corporation.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
PowerManager is a trademark of EIZO NANAO CORPORATION.
FlexScan, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.

3
Notice for this monitor
Notice for this monitor
This product is suited to creating documents, viewing multimedia content, and other general purposes.
Thisproducthasbeenadjustedspecicallyforuseintheregiontowhichitwasoriginallyshipped.Iftheproductisused
outsidetheregion,itmaynotoperateasspeciedinthespecications.
This product may not be covered by warranty for uses other than those described in this manual.
Thespecicationsnotedinthismanualareonlyapplicableforpowercordsandsignalcablesspeciedbyus.
Useoptionalproductsmanufacturedorspeciedbyuswiththisproduct.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.
(Refer to "Cleaning" on the next page.)
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels : 99.9994% or higher.
ThebacklightoftheLCDpanelhasaxedlifespan.Whenthescreenbecomesdarkorbeginstoicker,pleasecontact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.

4Notice for this monitor
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may
damage the cabinet or LCD panel.
NOTE
• Optional ScreenCleaner is recommended for cleaning the panel surface.
[LCD Panel]
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
• Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD panel again with a
dryclothforbetternishing.
[Cabinet]
Clean the cabinet with a soft cloth dampened with a little mild detergent.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes.Adjust the brightness of the monitor according to the
environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
CONTENTS
Notice for this monitor.............................................. 3
Cleaning ................................................................. 4
To use the monitor comfortably........................... 4
CONTENTS.............................................................5
Chapter 1 Features and Overview .....................6
1-1 Features............................................................ 6
1-2 Names of Switches.......................................... 8
1-3 Operation Switch Usage ................................. 9
1-4 Functions of Remote Control Buttons......... 10
1-5 Functions and Basic Operation.....................11
Chapter 2 Settings and Adjustment ................14
2-1 Input Signal Switching.................................. 14
●To switch the input signal for the desired image
sent from the equipment [Input Selection]........ 14
2-2 Screen Adjustment (Only for analog input
signal from a PC)........................................... 15
2-3 Color Adjustment........................................... 19
Simple Adjustment.............................................. 19
●To select the color mode [Color Mode]............. 19
Advanced Adjustment......................................... 20
●To adjust/set Color Mode.................................. 20
●Adjustment items.............................................. 21
2-4 Sound Adjustment......................................... 23
●To adjust [Treble/Bass/Balance/Sound Level].. 23
2-5 Auto Screen Size Changing(HDMI input signal
only)................................................................ 24
●To change the screen size automatically according
to the aspect information of the input signal [Auto
Screen Size]..................................................... 24
2-6 Screen Ratio Changing(HDMI input signal
only)................................................................ 24
●To change the display range of the input image
[Screen Ratio]................................................... 24
2-7 Monitor Power-saving Mode Setting............ 25
●To set the resume conditions from the power-
saving mode [Signal Detection]........................ 25
2-8 Power Indicator/EIZO Logo Display Setting ....... 26
●To turn off the power indicator while a screen is
displayed [Power Indicator].............................. 26
●To set EIZO logo display/no EIZO logo display
when the monitor turns on [EIZO Logo Appearing
Function]........................................................... 26
2-9 Beeper Setting ............................................... 26
●To set the beeper [Beep].................................. 26
2-10 Information Checking.................................... 27
●To check settings, usage time, etc.
[Information] ..................................................... 27
2-11 Language Setting to be displayed ............... 27
●To set the language displayed in the menu
[Language] ....................................................... 27
2-12 Locking Switches .......................................... 28
●To lock the available functions
[Operation Lock]............................................... 28
2-13 Resumption of Default Settings................... 28
●To reset the color adjustment [Reset]............... 28
●To reset all settings [Reset].............................. 28
Chapter 3 Troubleshooting...............................29
●Messages List .................................................. 33
Chapter 4 Reference .........................................34
4-1 Attaching an Arm........................................... 34
4-2 Specications ................................................ 35
4-3 Glossary ......................................................... 39
4-4 Preset Timing................................................. 41

6Chapter 1 Features and Overview
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 24” wide format LCD with Video signal input connector
• Resolution 1920 dots × 1200 lines
• Equipped with the ContrastEnhancer and OutlineEnhancer functions
• Equipped with PinP (Picture in Picture) function
• Enable to adjust the screen brightness automatically corresponding to the
brightness of the image and the environment
• Equipped with the specialized functions for displaying of game images (color
mode, screen size and “Thru Mode”)
• Employing the slide bar and realizing the excellent operability
• The ArcSwing 2 Stand enables to adjust the monitor height and monitor angle
freely
• Remote control enables to operate, set, and adjust the monitor easily
• Equipped with the Utility Software, “ScreenManager Pro for LCD
(Windows)”, which is operated via a keyboard or a mouse
[Applicable to PC signal input]
• DVI-D connector × 1, D-Sub mini 15-pin connector × 1 (two input
connectors)
• Horizontal scan frequency and Vertical scan frequency are as follows:
Horizontal scan
frequency Digital input signal 31.5 - 76kHz: each preset signal ±1kHz
Analog input signal 31.5 - 80kHz: each preset signal ±1kHz
Vertical scan
frequency Digital input signal 59 - 61Hz: each preset signal ±1Hz (VGATEXT: 69 - 71Hz)
(49 - 51Hz is also available@720p/1080p*)
Analog input signal 55 - 76Hz: each preset signal ±1Hz
(49 - 51Hz is also available@720p/1080p*)
* For some AV equipments such as Microsoft Xbox 360
• Compliance with frame synchronization mode (49.60 - 50.40Hz, 59.50 -
60.50Hz)
• Equipped with USB ports (Upstream × 2, Downstream × 2)
• Compliance with DVI digital input signal (HDCP)
• Equipped with USB audio function
• Enable to use connected USB devices on two PCs
[Applicable to Video signal input]
• HDMI connector × 2 (two input connectors)
NOTE
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “4-1 Attaching an Arm” on page
34.)
• About the remote control operation,
refer to “Remote Control Guide”.

7
Chapter 1 Features and Overview
Connecting to peripheral devices equipment
Speakers
(withbuilt-inamplier)
Allows you to enjoy sound from a
connected PC or AV equipment, etc.
NOTE
• Enables you to adjust the speaker
volume connected to the monitor
using the volume adjustment function
of the monitor.
• Enables you to enjoy sound by
connecting a headphone to the
headphone jack.
USB devices
Keyboard
(Also available to connect a printer or a
scanner, etc.)
Attention
• Use a PC/OS applicable to USB devices.
[Applicable OS]
- Windows 2000/XP/Vista
- Mac OS 8.5.1 or later
Mouse
PC
Enables you to use as a monitor by connecting
to a Windows PC or a Macintosh.
Attention
• The [USB] setting is required to change
depending on a PC used. ......page 14
AV equipment
HDMI connector
DVD player
Game
Enables you to display projected images by
connecting a DVD, Video, game, etc.
DVI connector
D-Sub mini
15-pin
connector

8Chapter 1 Features and Overview
1-2 Names of Switches
2 3 4 5 6 7
1
Switch
Setting menu (ScreenManager®*)
1. Remote control detector
2. Sensor (Detects the environmental brightness.)
3. Input Signal Selection switch ( )
4. Slide bar
5. Menu switch ( )
6. Power switch ( )
7. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
* ScreenManager ®is an EIZO’s nickname of the Setting menu.
(In this manual, the setting/adjustment item names in the Setting menu are put in angle brackets
< >. ex.: <Color>)
NOTE
• As well as touching , if you touch
the , or slide bar, the
monitor turns on.
• While the screen is displayed, the
power indicator that is lighting blue
can be turned off (see “To turn off
the power indicator while a screen is
displayed” on page 26).

9
Chapter 1 Features and Overview
1-3 Operation Switch Usage
NOTE
• There are three methods of operation:
- Touching the switch
- Tapping the slide bar
- Tracing the slide bar
■Turning the power On/Off
■Displaying/Quitting a menu Setting menu
Shortcut menu
(When the menu is not displayed on the screen)
■Selecting a menu item
Setting and Adjusting
The increase/decrease speed of the
adjustment value may change
depending on the tracing speed of the
slide bar.
At ne adjustment
Tapping once changes the adjustment value to one step up or down.
Touching the slide bar continuously may change the value serially.
■Fixing an item
Deciding the setting and adjusting value
Power Off: Touch .
Power On: Touch any of the keys to turn on the monitor.
Tap .
Touch .
Touch the slide bar.
Trace the slide bar left and right.
Tap either end of the slide bar, marked with and .
Tap the slide bar.
• The operations with the slide bar
(selecting,setting,adjusting,xing
and deciding items) can be performed
with the remote control.
* When the signal is not input, even if
the contents of the menu have been
changed, the menu of “Volume” is
displayed.
■Switching the Input Signal
Each time you tap the switch, the input
signal switches to the other.
By touching the switch for 5 seconds, the contents of the menu
changes as follows: "Volume" → (touching for 5 seconds) →
"Color Mode" →(touching for 5 seconds) → "Brightness".*

10 Chapter 1 Features and Overview
1-4 Functions of Remote Control Buttons NOTE
• For the details, refer to “ Remote
Control Guide”.
Button Function
1 POWER Turns the power on or off
2 OFF TIMER Sets the time until the monitor power-off
3 COLOR MODE Changes the color mode
4 SCREEN SIZE Changes the screen size
5 GAME Use when displaying the game images (for HDMI
input signal)
SIZE Changes the screen size
THRU Changes to “Thru Mode” (minimizes the delay of
screen display)
6 USB Changes the USB setting when the PC is used
7t/ u/ ENTER Use to select the item, and decide the setting and the
adjusting value in each menu
8 MENU Displays/Quits the Setting menu
9 VOLUME Adjusts the volume
10 MUTE Mutes sound temporarily
11 INPUT SELECT Switches the input signal
PC PC 1/PC 2
HDMI HDMI 1/HDMI 2
12 PinP Use for PinP display mode
ON/OFF Turns PinP display on or off
FULL Displays the Sub-Window in full screen
SOUND Changes the output sound (Main Window, Sub-
Window or both of Main Window and Sub-Window)
POSITION Changes the Sub-Window position
TEMP OFF Hides the Sub-Window display temporarily
TRANSLUCENT Sets the translucent level for Sub-Window
(11)
(5)
(12)
(10)
(6)
(9)
(1)
(2)
(3)
(4)
(8)
(7)

11
Chapter 1 Features and Overview
1-5 Functions and Basic Operation
To adjust the screen, color and volume
1Screen Adjustment
Screen menu
●Adjusting the screen automatically
[Auto Screen Adjust]
2Advanced Screen Adjustment
●To eliminate vertical bars
[Clock] ………………………………see page 16
●To remove flickering or blurring
[Phase] ………………………………see page 17
●To correct screen position
[Hor.Position] ………………………see page 17
[Ver.Position]…………………………see page 17
●
To set when the image is not displayed with
proper resolution [Resolution] …… see page 30
●To adjust color gradation automatically
[Auto Range Adjust] ………………see page 18
●To set when noise appears on the screen
[Signal Filter] ………………………see page 31
(Only for analog input signal from PC: PC 2 Input)
Page 15
Color Adjustment
(Simple Adjustment)
Color menu
●To select the color mode [Color Mode]
Color Adjustment
(Advanced Adjustment)
●[Brightness / Black Level / Contrast / Saturation
/ Hue / Temperature / OutlineEnhancer /
ContrastEnhancer / Gain / Gamma / Noise Filter
/ I/P Conversion] can be set for each mode.
Settable functions vary with the display mode.
Resumption of Default Settings
●To reset the color adjustment
[Reset] ………………………………see page 28
Page 19
Page 20
Sound Adjustment
Sound menu
●To adjust [Treble / Bass / Balance / Sound Level]
Page 23
●[ ] stands for the function name.
●Settable functions differ depending on the input
signal.
(Refer to “Setting menu list” on page 37.)
Setting menu
(As for the menu operation, refer to
page 13.)

12 Chapter 1 Features and Overview
To make useful settings/adjustments
Resumption of Default Settings
●To reset all settings [Reset]
Page 28
Setting menu
(As for the menu operation,
refer to page 13.)
Monitor Settings menu
Language Setting to be displayed
●To set the language displayed in the menu
[Language] …………………………see page 27
Adjusting the Brightness automatically
●To adjust the screen brightness automatically
corresponding to the brightness of the image
and the environment
[BrightRegulator] ……………………see page 22
Monitor Power-saving Mode Setting
●To set the resume conditions from the power-
saving mode [Signal Detection]……see page 25
Power Indicator Setting
●To turn off the Power indicator while a screen is
displayed [Power Indicator] ………see page 26
Beeper Setting
●To set the beeper [Beep]……………see page 26
Auto Screen Size Changing
●To change the screen size automatically
according to the aspect information of the input
signal [Auto Screen Size] …………see page 24
Screen Ratio Changing
●To change the display range of the input image
[Screen Ratio] ………………………see page 24
Color Space Setting
●To set when the image color is not displayed
correctly [Color Space] ……………see page 32
Field Rate Setting
●To select the setting according to the area where
the monitor is used [Field Rate] …see page 32
USB Setting Changing
USB menu
●To change the setting according to the PC used
(when USB is connected) [USB]
Page 14
Information Checking
Information menu
●To check settings, usage time, etc. [Information]
Page 27
EIZO Logo Display Setting
●To set EIZO logo display/no EIZO logo display
when the monitor turns on
[EIZO Logo Appearing Function]
Page 26
Locking Switches
●To lock the available functions [Operation Lock]
Page 28
●[ ] stands for the function name.
●Settable functions differ depending on the input
signal.
(Refer to “Setting menu list” on page 37.)

13
Chapter 1 Features and Overview
Screen Size Changing
●To change the screen image/projected image size
appearing on the screen [SCREEN SIZE]
Off Timer Setting
●To set the time until the monitor power-off [OFF
TIMER]
To make useful settings/adjustments (Continued)
The following settings and adjustments are available with the remote control. For the details on the function, refer to
“Remote Control Guide”.
PinP (Picture in Picture) Display
●To display the PC input signal screen
(Main Window) and HDMI input signal screen (Sub-
Window) on the monitor simultaneously [ON/OFF]
●To display the Sub-Window in full screen [FULL]
●To select the output sound [SOUND]
●To change the Sub-Window position
[POSITION]
●To hide the Sub-Window display temporarily [TEMP
OFF]
●To set the translucent level for Sub-Window
[TRANSLUCENT]
Color Mode Changing
●To change the display mode according to the
monitor usage [COLOR MODE]
Game Image Display Setting
●To change the image size that is displayed on the
screen [SIZE]
●To change the mode to “Thru Mode” (minimizes the
delay of screen display) [THRU]
USB Setting Changing
●To change the setting according to the PC used
(when USB is connected) [USB]
Input Signal Switching
●To switch the input signal according to the device
that you want to display [PC/HDMI]
Volume Adjusting
●To turn the volume up/down [VOLUME (+/-)]
●To mute the sound temporarily [MUTE]
●[ ] stands for the button name on the remote
control.
Basic operation of the Setting menu
[Displaying the Setting menu and selecting function]
(1) Touch of the operation switch. The Main menu appears.
(2) Trace the slide bar left and right to select the function and tap the slide bar. The Sub menu appears.
(3) Trace the slide bar left and right to select the function and tap the slide bar. The setting/adjustment menu appears.
(4) Trace the slide bar left and right to set/adjust the monitor and tap the slide bar. The setting/adjustment value is saved.
[Quitting the Setting Menu]
(1) Touch . The Setting menu quits.
NOTE
• Some menus may not have a sub-menu.

14 Chapter 2 Settings and Adjustment
Attention
• If the [USB] setting is not set
properly, the USB devices connected
to the monitor may not work or
no sound may come out from the
speakers.
• Please note the following when
changing the setting.
- When connecting a memory device
such as a USB memory to the
monitor, the data may be lost and
damaged. Be sure to change the
USB setting after removing the
memory device.
- When an application such as a
sound playback, etc. works, the
sound may not output if the setting
is returned to the original. Be sure
to change the USB setting after
exiting from the application.
NOTE
• The USB setting can be changed with
the remote control. (Refer to “Remote
Control Guide”.)
Chapter 2 Settings and Adjustment
2-1 Input Signal Switching
● To switch the input signal for the desired image sent from
the equipment [Input Selection]
[Procedure]
(1) Tap of the operation switch.
Each time you tap the switch, the input signal switches as below.
PC1 → PC2 → HDMI1 → HDMI2 → PC1.....
■When connecting a PC with USB connection [USB]
Change the [USB] setting according to the input signal of the PC used.
Settings Using status
PC 1 (Digital signal) When using PC 1.
PC 2 (Analog signal) When using PC 2.
[Procedure]
(1) Choose the <USB> icon in the Setting menu and tap the slide bar.
The <USB> menu appears.
(2) Trace the slide bar left and right to select either “PC 1” or “PC 2” and tap
the slide bar.
The USB setting is completed.
[When the following message appears]
When the following message appears, “If the USB setting is changed, the USB
connectiontotheselectedPCwillbelost.Doyouchangethesetting?”conrmon
the right (for changing the USB setting) to proceed the step 3.
(3) Trace the slide bar left and right to select “Yes” and tap the slide bar.
The USB setting is completed.
NOTE
• The input signal can be switched with
the remote control. (Refer to “Remote
Control Guide”.)
• Touching the switch during PinP
display switches the input signal of
the Sub-Window.

15
Chapter 2 Settings and Adjustment
Attention
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• The Auto Adjust function may not
work properly with some graphics
boards.
NOTE
• When the screen image is not
displayed with the proper resolution
even after Auto Screen Adjust is
performed, set the resolution of
the input signal manually. If the
resolution is set, the [Auto Screen
Adjust] is performed again. (Refer to
Chapter 3, “Troubleshooting” on page
30.)
NOTE
• When digital input signals are used,
images are displayed correctly based
on the preset data of the monitor.
No screen adjustment is required.
2-2 Screen Adjustment (Only for analog input signal
from a PC)
Themonitorscreenadjustmentisusedtosuppressickeringofthescreenor
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
thersttimeorwhenthesettingsofthePCinuseareupdated.Noadjustment
is required when the image appears correctly.
The Auto ScreenAdjust function works in the following cases:
• Whenasignalisinputintothemonitorforthersttime.
• Whenasignalisinputintothemonitorforthersttimeafterthe
resolutionorrefreshrateofinputsignalsischanged.
[Adjustment Procedures]
1Perform the auto screen adjustment.
●  Toadjustickering,screenposition,andscreensize
automatically [Auto Screen Adjust]
(1) Choose the <Screen> icon in the Setting menu and tap the slide
bar.
The <Screen> menu appears.
(2) Choose the <Auto Screen Adjust> icon in the <Screen> menu and
tap the slide bar.
“Your current setting will be lost, if you perform “Auto Screen Adjust”.
Do you continue?” appears on the screen.
(3) Trace the slide bar left and right to select “Yes” and tap the slide
bar.
The Auto Screen Adjust function is activated and the clock, phase and
screen position are adjusted automatically.
2Prepare the display pattern for the analog display adjustment.
(1) Load the “EIZO LCD Utility Disk” to your PC.
(2) For Windows PC: Start the “Screen Adjustment Utility” from the
startup menu on the disk.
 ForotherthanWindowsPC:Usethescreenadjustmentpatternles.
• If the screen is displayed correctly : go to step 5
• If the screen is not displayed correctly : go to step 3
Attention
• The Auto Screen Adjust function does
not work for the input signal of low
resolution, such as VGA, etc.
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
NOTE
• For how to open and use the screen
adjustmentpatternles,referto
“Readme.txt”orthe“readme”le.
When you are using a Macintosh PC,
youcanopentheledirectlyfromthe
start menu of the disk.

16 Chapter 2 Settings and Adjustment
3Perform the auto screen adjustment again with the analog
screen adjustment pattern displayed.
● Toadjustickering,screenposition,andscreensize
automatically [Auto Screen Adjust]
(1) Display Pattern 1 in full screen on the monitor using the “Screen
AdjustmentUtility”orthescreenadjustmentpatternles.
(2) Choose the <Screen> icon in the Setting menu and tap the slide
bar.
The <Screen> menu appears.
(3) Choose the <Auto Screen Adjust> icon in the <Screen> menu and
tap the slide bar.
“Your current setting will be lost, if you perform “Auto Screen Adjust”.
Do you continue?” appears on the screen.
(4) Trace the slide bar left and right to select “Yes” and tap the slide
bar.
The Auto Screen Adjust function is activated and the clock, phase and
screen position are adjusted automatically.
• If the screen is displayed correctly : go to step 5
• If the screen is not displayed correctly : go to step 4
4Perform the advanced adjustment in the <Screen> menu.
●To eliminate vertical bars [Clock]
(1) Choose the <Clock> icon in the <Screen> menu and tap the slide
bar.
The <Clock> menu appears.
(2) Trace the slide bar left and right to eliminate the vertical bars and
tap the slide bar.
The adjustment is completed.
NOTE
• Trace the slide bar slowly to adjust
since the adjustment point is easily
missed.
• Whenblurring,ickeringorbars
appear on the screen after adjustment,
proceed to [Phase] to remove
ickeringorblurring.

17
Chapter 2 Settings and Adjustment
● Toremoveickeringorblurring[Phase]
(1) Choose the <Phase> icon in the <Screen> menu and tap the slide
bar.
The <Phase> menu appears.
(2)Tracetheslidebarleftandrighttoremovetheickeringor
blurring and tap the slide bar.
The adjustment is completed.
●To correct screen position [Hor.Position/Ver.Position]
Sincethenumberofpixelsandthepixelpositionsarexedon
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
Settings Screen status
Hor.Position When the screen position on the monitor is
shifted horizontally, perform the screen position
adjustment.
Ver.Position When the screen position on the monitor is
shifted vertically, perform the screen adjustment.
(1) Choose the <Hor.Position>/<Ver.Position> icon in the <Screen>
menu and tap the slide bar.
The <Hor.Position>/<Ver.Position> menu appears.
(2) Trace the slide bar left and right to adjust so that the whole display
area, drawn by the dotted line frame, appears on the screen. Then
tap the slide bar.
The adjustment is completed.
Attention
• Theickeringorblurringmaynot
be eliminated perfectly depending on
your PC or graphics board.
NOTE
• When vertical bars appear on the
screen after adjustment, go back
to “To eliminate the vertical bars
[Clock]” and perform again. (Clock
→Phase→Position)

18 Chapter 2 Settings and Adjustment
5Adjust the color gradation.
●To adjust color gradation automatically [Auto Range Adjust]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Display Pattern 2 in full screen on the monitor using the “Screen
AdjustmentUtility”orthescreenadjustmentpatternles.
(2) Choose the <Auto Range Adjust> icon in the <Screen> menu and
tap the slide bar.
“Your current setting will be lost, if you perform “Auto Range Adjust”.
Do you continue?” appears on the screen.
(3) Trace the slide bar left and right to select “Yes” and tap the slide
bar.
Color gradation is adjusted automatically.
(4) Close the Pattern 2. When using the “ScreenAdjustment Utility”,
close the program.

19
Chapter 2 Settings and Adjustment
2-3 Color Adjustment
Simple Adjustment
● To select the color mode [Color Mode]
Changing the color mode enables you to set the monitor to the appropriate
display mode.
(PC Input Signal)
An appropriate display mode is selectable out of six modes.
Modes Status
Text Suitable for displaying text for word processing or
spreadsheets.
Picture Suitable for displaying images such as photos or picture
images.
Movie Suitable for playing back animated images.
sRGB Suitable for color matching with sRGB compatible
peripherals.
Game (PC) Suitable for displaying game images.
Custom (xxx*) Available for making desired settings.
* The input signal selected at that time is displayed.
(HDMI Input Signal)
Anappropriatedisplaymodeisselectableoutofvemodes.
Modes Status
Standard Standard video display.
Cinema Suitable for cinema effect, etc.
Dynamic Suitable for a clearly outlined image.
Game Suitable for displaying game images.
Custom (xxx*) Available for making desired settings.
* The input signal selected at that time is displayed.
[Procedure]
(1) Choose the <Color> icon in the Setting menu and tap the slide bar.
(2) Choose the <Color Mode> icon in the <Color> menu and tap the slide bar.
The <Color Mode> menu appears.
(3) Trace the slide bar left and right to select the desired mode and tap the slide
bar.
The color mode setting is completed.
NOTE
• The color mode can be changed with
the remote control. (Refer to “Remote
Control Guide”.)
• The adjustment status of the Color
Mode may be changed. (Refer to
“Advanced Adjustment” on page 20.)

20 Chapter 2 Settings and Adjustment
Advanced Adjustment
● To adjust/set Color Mode
Independent adjustments/settings and saving of the Color adjustment are
available for each mode.
(PC Input Signal) √:Adjustmentavailable−:Adjustmentunavailable
Icon Function Color mode
Text Picture Movie sRGB Game
(PC)
Custom
(xxx*)
Brightness √ √ √ √ √ √
Black Level − − − − √ √
Contrast −√√−√ √
Saturation √√√−√ √
Hue √√√−√ √
Temperature √√√−√ √
Advanced Settings
OutlineEnhancer −√ √ −√ √
ContrastEnhancer
−√ √ −√ √
Gain − − − − √ √
Gamma − − − − √ √
Reset √ √ √ √ √ √
(HDMI Input Signal) √:Adjustmentavailable−:Adjustmentunavailable
Icon Function Color mode
Standard Cinema Dynamic Game Custom
(xxx*)
Brightness √ √ √ √ √
Black Level √ √ √ √ √
Contrast √ √ √ √ √
Saturation √ √ √ √ √
Hue √ √ √ √ √
Temperature √ √ √ √ √
Advanced Settings
OutlineEnhancer √ √ √ √ √
ContrastEnhancer √ √ √ √ √
Gamma − − − √ √
Noise Filter − − − √ √
I/P Conversion − − − √ √
Reset √ √ √ √ √
* The input signal selected at that time is displayed.
Attention
• Perform [Auto Range Adjust]
before starting color adjustment for
analog input signals sent from a PC.
Refer to “To adjust color gradation
automatically” on page 18.
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Choose <Reset> in the <Color> menu
to revert to the default settings (factory
settings) of hue of the color mode
selected.
• The same image may be seen in
different colors on multiple monitors
duetotheirmonitor-specic
characteristics.Makenecolor
adjustment visually when matching
colors on multiple monitors.
NOTE
• The adjustment functions differ
depending on the mode. For details,
refer to the tables at left.