Eizo FlexScan S2410W User manual

SAFETY SYMBOLS
PRECAUTIONS
1. Introduction
1-1. Features
1-2. Package Contents
1-3. Controls &
Connectors
2. CABLE CONNECTION
2-1. Before Connecting
2-2. Connecting the
Signal Cable
2-3. Connecting Two PCs
to the Monitor
3. ScreenManager
3-1. How to use the
ScreenManager
3-2. ScreenManager
Adjustments and Settings
3-3. FineContrast
3-4. Useful Functions
4. ADJUSTMENT
4-1. Screen Adjustment
4-2. Displaying Lower
Resolutions
4-3. Color Adjustment
4-4. Power-save Setup
5. MAKING USE OF USB
(Universal Serial Bus)
6. ATTACHING AN ARM
7. TROUBLESHOOTING
8. CLEANING
9. SPECIFICATIONS
This manual is checked under the browser
settings shown below. Text size can change for
another one through browser setting.
Microsoft Internet Exproler:
Text size: Medium
Encoding: Western European

10. GLOSSARY
APPENDIX
About TCO'03 (Applicable white)
About TCO'99 (Applicable black)
FCC Declaration of Conformity
Hinweis zur Ergonomie / Recycle
Auskunft / Hinweise zur Auswahl
des richtigen Schwenkarms für
Ihren Monitor

SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can be life
threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or property
or product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2005 EIZO NANAO CORPORATION All rights reserved. No part of this manual
may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO
CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or
information confidential unless prior arrangements are made pursuant to EIZO NANAO
CORPORATION's receipt of said information. Although every effort has been made to ensure that
this manual provides up-to-date information, please note that EIZO monitor specifications are
subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards
Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager is a trademark of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION

As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.

PRECAUTIONS
IMPORTANT!
●This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
●To ensure personal safety and proper maintenance, please read this section and the caution
statements on the unit (refer to the figure below).
[Location of the Caution Statements]
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may
result in fire, electric shock, or equipment damage.

Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage. If an object or liquid falls/spills into the cabinet, unplug the unit
immediately. Have the unit checked by a qualified service engineer before
using it again.
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or
equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a
damaged unit. Using a damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
●Do not place outdoors.
●Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
●Do not place in a dusty or humid environment.
●Do not place in a location where the steam comes directly on the screen.
●Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.

Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may result in fire or electric
shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
●The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User's Manual may cause fire, electric
shock, or equipment damage.
●Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
●Do not place the cord underneath the unit or other heavy objects.
●Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire or electric
shock.

Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do
not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some
physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.

Do not block the ventilation slots on the cabinet.
●Do not place any objects on the ventilation slots.
●Do not install the unit in a closed space.
●Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment
damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
LCD Panel

In order to suppress the luminosity change by long-term use and to maintain the
stable luminosity, use of a monitor in lower brightness is recommended.
The screen may have defective pixels. These pixels may appear as slightly light or
dark area on the screen. This is due to the characteristics of the panel itself, and not
the product.
The backlight of the LCD panel has a fixed life span. When the screen becomes
dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in
damage to the screen. There will be prints left on the screen if the pressed image is
dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or
damage your LCD panel. Leave the screen white to decrease the prints.
When the screen image is changed after displaying the same image for extended
periods of time, an afterimage may appear. Use the screen saver or timer to avoid
displaying the same image for extended periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur inside and outside the monitor. In that case, do not turn the
monitor on and wait until dew condensation disappears, otherwise it may cause
some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.

1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
●24" wide format LCD
●Dual inputs compliant (DVI-I x 2)
●DVI Digital input (TMDS) compliant
●[Horizontal scanning frequency] Analog: 24 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency] Analog: 49 - 86 Hz (1600x1200: 49-76Hz/1920x1200: 49 -61Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1920 dots x 1200 lines
●Frame Synchronous mode supported (59 - 61 Hz)
●Smoothing function incorporated for the adjustment of an enlarged image
●FineContrast modes, to select the most suitable mode for screen display
●The utility software "ScreenManager Pro for LCD" (for Windows) which can control the monitor
from a PC with a mouse or keyboard is included (refer to the EIZO LCD Utility Disk).
●The ArcSwing Stand enables to adjust the monitor height and monitor angle freely
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or damaged.
●LCD Monitor
●Power Cord
●Analog Signal Cable (FD-C16)
●Digital Signal Cable (FD-C39)
●EIZO USB Cable (MD-C93)
●"EIZO LCD Utility Disk" CD-ROM
●User's Manual (in the CD-ROM)
●Setup Manual
●LIMITED WARRANTY
●Mounting Screws (M4 x 12 mm, 6 pcs)
●Please retain the packing materials for future transference.

1-3. Controls & Connectors
Front
(1) ScreenManager® Monitor Adjustment menu
(2) FineContrast Menu Directly touching the left or right button allows you to select a
FineContrast mode.
(3) Input Signal Selection Switch (SIGNAL) Switch the input signals when connecting 2 PCs.
(4) Auto Adjustment Switch (AUTO) Adjust the screen to appropriate condition automatically (analog
input only).
(5) Enter Switch (ENTER) Show the ScreenManager on the screen.
Confirm the setting / adjustment function.
Save the adjustment values.
(6) Directing Switch (Left, Down, Up, Right) Select the desired function.
Increase and decrease the adjustment value.
(7) Power Switch ON or OFF the monitor's power.
(8) Power Indicator
Indicate monitor's operation status.
Blue: Operation
Flashing blue: Last 15 min. of operation time before entering the
power off state.
Yellow: Power saving
Off: Power off
Rear

(9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by removing the stand
(See "6. ATTACHING AN ARM").
(10) Security Lock Slot
Allows for connection of a security cable. This lock supports Kensington's
MicroSaver security system. For further information, please consult:
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: [phone], x3348, Intl: 650-572-2700, x3348
Fax: [phone]
http://www.kensington.com
(11) Cable Holder House the cables.
(12) Power Connector Connect the power cord.
(13) DVI-I Input Connector x 2 Connect the signal cable .
(14) USB Port
(1 Upstream) USB Port upstream is used when using the software EIZO LCD Utility Disk.
(15) USB Port
(2 Downstream) See Making Use of USB Section.

2. CABLE CONNECTION
2-1. Before Connecting
Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency)
in accordance with the charts below.
●When your computer and display support VESA DDC, the suitable resolution and the refresh rate are
set by just plugging your display into the computer without any manual settings.
Analog Input
Resolution Frequency Dot Clock Remarks
640×480 67Hz
202.5 MHz
(Max)
Apple Macintosh
640×480 ~85Hz VGA, VESA
720×400 70Hz VGA TEXT
800×600 ~85Hz VESA
832×624 75Hz Apple Macintosh
1024×768 ~85Hz VESA
1152×864 75Hz VESA
1152×870 75Hz Apple Macintosh
1280×960 60Hz VESA
1280×960 75Hz Apple Macintosh
1280×1024 ~85Hz VESA
1600×1200 ~75Hz VESA
1680×1050 60Hz VESA CVT
1920×1200 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
Digital Input
The monitor supports the following resolutions only.
Resolution Frequency Dot Clock Remarks
640×480 60Hz VGA

162 MHz
(Max)
720×400 70Hz VGA TEXT
800×600 60Hz VESA
1024×768 60Hz VESA
1280×960 60Hz VESA
1280×1024 60Hz VESA
1600×1200 60Hz VESA
1680×1050 60Hz VESA CVT,
VESA CVT RB
(Reduced Blanking)
1920×1200 60Hz VESA CVT RB
(Reduced Blanking)
2-2. Connecting the Signal Cable
●Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor and the other end of
the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector of the
PC PC

Signal Cable (FD-C16 enclosed)
Video Output
Connector / D-Sub
mini 15 pin
Input Connector
(monitor) / D-Sub
mini
15 pin
●Standard graphics card
●Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
Signal Cable (FD-C16 enclosed) + Macintosh Adapter
(Optional)
Video Output
Connector / D-Sub
15
pin
Input Connector
(monitor) / D-Sub
mini
15 pin
●Macintosh
Digital Input
Signal Cable Connector of the PC PC
Signal Cable (FD-C39 enclosed)
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
●Digital Graphics card
●Power Mac G4/G5 (DVI)
●The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2. Plug the power cord into the power connector on the rear of the monitor.
3. Plug the other end of the power cord into a power outlet.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord. Not doing so may
result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Not doing so may result in fire or electric shock.

4. Lead the power cord and signal cable into the cable holder at rear of the monitor.
●The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/
Landscape display.
5. Adjust the "height", "front and back position" and "angle" of the monitor.
Grip both side of the center part of the monitor and move
slowly (refer to the right figure.)
(1) Adjust the height of the monitor. To heighten, push the
monitor backward. To lower, pull the monitor forward.
(2) Adjust the position and angle of the monitor.
To adjust the angle of the monitor, hold the stand with one hand and tilt the monitor with another
hand by holding the upper side of the cabinet.

(3) If necessary, fine adjust the height of the monitor.
6. Turn on the monitor's Power switch and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "7. TROUBLESHOOTING" for advice.
Whenever finished, turn off the PC and the monitor.
●When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is displayed
for a few seconds on the right top corner of the screen.
●Adjust brightness of the screen depending on the brightness of your environment. Too dark or too
bright of a screen can cause eyestrain.
●Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
7. When using the software, ScreenManager Pro for LCD (for Windows), connect the
upstream port of the monitor to the downstream port of the USB compliant PC or
another hub with the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details about
the "ScreenManager Pro for LCD", refer to the readme.txt in the CD-ROM.

2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the
back of the monitor.
Connecting Examples
SIGNAL 1 SIGNAL 2
(Ex.1) Analog D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C39 enclosed)
DVI Digital
(Ex.2) Analog D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)
D-Sub
mini
15 pin Analog
(Ex.3) Digital DVI
Signal Cable
(FD-C39 enclosed) Signal Cable (FD-C39 optional) DVI Digital
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL
2 as the active input at any time. Every time the switch is touched, the input changes. When switching the
signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the
right top corner of the screen.
The Priority Input Signal

This function is used to select which PC will have priority to control the monitor when utilizing two PCs.
The monitor constantly checks the input signals and switches automatically in accordance with the "Input
Priority" setting (see table below). Once a priority is set, whenever a change of signal is detected at the
selected input, the monitor will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically detects and displays
that signal.
Priority setting Performance
1
(SIGNAL 1 - DVI-I Input Connector)
If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
●When the power of the monitor is turned ON.
●When the signal input to Signal 1 is changed even if active input was
Signal 2 (Analog input only).
2
(SIGNAL 2 - DVI-I Input Connector)
If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
●When the power of the monitor is turned ON.
●When the signal input to Signal 2 is changed even if active input was
Signal 1 (Analog input only).
Manual The monitor will not detect signals automatically in this mode. Select the
active input by pressing the Input Signal Selection Button on the monitor's
control panel.
●When the "1" or "2" is selected, the power saving mode of the monitor activates only if both PCs are in
power saving mode.