Eizo radiforce rx440 User guide

English Deutsch Français 中文
• ElManualdeinstalaciónenespañolsepuededescargardelsitio:http://www.eizo.com
• IlManualediinstallazioneinItalianoèdisponibileperildownloadnelsitoWeball’indirizzo:
http://www.eizo.com
• Installationshandbokenpåsvenskagårattladdanedfrånvårwebbplats:http://www.eizo.com
• ΜπορείτενακάνετελήψητουΕγχειριδίουεγκατάστασηςσταΕλληνικάαπότονιστότοπόμας:
http://www.eizo.com
• Руководствопоустановкенарусскомязыкедоступнодлязагрузкиснашегосайтапоадресу:
http://www.eizo.com
••中文的設定操作手冊可以從我們的網站下載：http://www.eizo.com
• Instalačnípříručkavčeštinějedostupnákestaženíznašichstránek:http://www.eizo.com
• Eninstallationsvejledningpådanskkanhentesfravoreswebsted:http://www.eizo.com
• Asennusopassuomeksionladattavissaosoitteesta:http://www.eizo.com
• 한국어로된설치설명서를당사웹사이트에서다운로드할수있습니다:http://www.eizo.com
• DeinstallatiehandleidinginhetNederlandskanwordengedownloadvanonzesite:
http://www.eizo.com
• Installasjonsveiledningpånorskkanlastesnedfravårtområde:http://www.eizo.com
• Podręcznikinstalacjiwjęzykupolskimmożnapobraćznaszejwitrynyinternetowej :
http://www.eizo.com
• OManualdeinstalação(emportuguês)estádisponívelparadownloadnonossowebsite:
http://www.eizo.com
• TürkçeKurulumKılavuzusitemizdenindirilebilir:http://www.eizo.com
• http://www.eizo.com:
Instructions for Use: ■SetupManual
Important: PleasereadPRECAUTIONS,thisSetupManualandtheUser’sManual
(ontheCD-ROM)carefullytofamiliarizeyourselfwithsafeandeffective
usage.Pleaseretainthismanualforfuturereference.
Gebrauchsanweisung: ■Installationshandbuch
Wichtig: LesenSiedieVORSICHTSMASSNAHMEN,diesesHandbuchzur
EinrichtungunddasBenutzerhandbuch(aufderCD-ROM)aufmerksam
durch,umsichmitdersicherenundefzientenBedienungvertrautzu
machen.BewahrenSiediesesHandbuchzumspäterenNachschlagenauf.
Notice d’instruction: ■Manueld’installation
Important : VeuillezlireattentivementlesPRECAUTIONS,ceManueld’installation
ainsiqueleManueld’utilisation(inclussurleCD-ROM)andevous
familiariseravecceproduitetdel’utiliserefcacementetentoutesécurité.
Veuillezconservercemanuelpourréférenceultérieure.
使用说明书:•■设定手册
重要事项：• 请仔细阅读预防措施、本设定手册和用户手册（储存在光盘上），以便掌握
如何安全、有效地使用本产品。请保留本手册，以备日后参考。

Compatible Resolutions
Kompatible Auösungen
Résolutions compatibles
兼容的分辨率
The monitor supports the following resolutions.
Der Monitor unterstützt die folgenden Auösungen.
Ce moniteur prend en charge les résolutions suivantes.
本显示器支持下列分辨率。
√:Supported
DisplayPort
Resolution Applicable
signal
vertical scan
frequency Dot Clock Single PbyP*1 PinP*1
Landscape Portrait Landscape Portrait Landscape
720×400 VGATEXT 70Hz
280MHz
(Max.)
√√√√√
640×480 VGA 60Hz √ √ √ √ √
800×600 VESA 60Hz √ √ √ √ √
1024×768 VESA 60Hz √ √ √ √ √
1200×1600 VESA 60Hz - - √ - -
1280×1024 VESA 60Hz √ √ √ √ √
1280×1600 VESACVTRB 60Hz - - √ - -
1600×1200 VESA 60Hz √ √ - √ √
1600×1280 VESACVTRB 60Hz - - - √ -
1600×2560 VESACVTRB 60Hz - √ - - -
2560×1600 VESACVTRB 60Hz √ - - - √
DVI-1 / DVI-2
Resolution Applicable
signal
vertical scan
frequency Dot Clock Single PbyP*1 PinP*1
Landscape Portrait Landscape Portrait Landscape
720×400 VGATEXT 70Hz
DVI-1:
280MHz
(Max.)
DVI-2:
165MHz
(Max.)
√√√√√
640×480 VGA 60Hz √ √ √ √ √
800×600 VESA 60Hz √ √ √ √ √
1024×768 VESA 60Hz √ √ √ √ √
1200×1600 VESA 60Hz - - √ - -
1280×1024 VESA 60Hz √ √ √ √ √
1280×1600 VESACVTRB 60Hz - - √ - -
1600×1200 VESA 60Hz √ √ - √ √*3
1600×1280 VESACVTRB 60Hz - - - √ -
1600×2560 VESACVTRB 60Hz - √*3 - - -
1600×2560 SingleLink 30Hz - √ - - -
2560×1600 VESACVTRB 60Hz √*3 - - - -
2560×1600*2 VESACVTRB 30Hz √ - - - √*3
*1 For details, refer to the User’s Manual (on the CD-ROM). The applicable signal for the sub screen (Sub) for “PinP”
differs.
*1 Einzelheiten entnehmen Sie dem Benutzerhandbuch (auf der CD-ROM). Das geeignete Signal für den
Nebenbildschirm (Neben) für „PinP“ ist unterschiedlich.
*1 Reportez-vous au Manuel d’utilisation (sur le CD-ROM) pour obtenir plus de détails. Le signal applicable pour le
sous-écran (Sous) pour « PinP » diffère.
*1 详细说明，请参照（在CD-ROM上）用户手册。“PinP”子画面（子）的适用信号不同。
*2 Single Link
*3 Only supported by DVI-1
*3 Nur von DVI-1 unterstützt
*3 Uniquement compatible avec DVI-1
*3 只有DVI-1支持

1
English
Location of the Caution Statements
Symbols on the unit
Symbol This symbol indicates
MainPowerSwitch: Presstoturnthemonitor’smainpoweroff.
MainPowerSwitch: Presstoturnthemonitor’smainpoweron.
Powerbutton: Presstoturnthemonitor’spoweronoroff.
Alternatingcurrent
Alertingelectricalhazard
CAUTION: RefertoSAFETYSYMBOLSsectioninPRECAUTIONS.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every effort has been
made to ensure that this manual provides up-to-date information, please note that EIZO monitor specications are
subject to change without notice.

2
Package Contents
Checkthatallthefollowingitemsareincludedinthepackagingbox.Ifanyitemsaremissingordamaged,contact
yourlocalEIZOrepresentative.
Note
• Please keep the packaging box and materials for future movement or transport of the monitor.
• Monitor
• Powercord
• Digitalsignalcable:DisplayPort-DisplayPort
(PP300)
• Digitalsignalcable:DVI-D-DVI-D(DualLink)
(DD300DL)
• USBcable:UU300
• EIZOLCDUtilityDisk(CD-ROM)
• SetupManual(thismanual)
• PRECAUTIONS
• VESAMountingScrews:M4×12:2pcs.
Controls and Functions
19
177
1 2 3 4 5 6 9 10 11 12 13 14 15 16
20
8
18
Adjustmentmenu*1
1. Presence Sensor Detectsthemovementofapersoninfrontofthemonitor.
2. button SwitchestheCALSwitchmode.
3. button Cancelsthesetting/adjustmentandexitstheAdjustmentmenu.
4. button Choosesandincreases/decreasesadjustmentsettingsforadvancedadjustment
usingtheAdjustmentmenu.
5. button DisplaystheAdjustmentmenu,determinesanitemonthemenuscreen,andsaves
valuesadjusted.
6. button • Turnsthepoweronoroff.
• Indicatesthemonitor’soperationstatus.
Green:Operating,Orange:Powersavingmode,Off:Mainpower/poweroff
7. Ambient Light Sensor Measurestheenvironmentalilluminance.
8. Integrated Front Sensor
(slide type)
UsedforcalibrationandGrayscaleCheck.
9. Main power switch Turnsthemainpoweronoroff.
10. Power connector Connectsthepowercord.
11. PS/2 connector Usedformaintenance.Donotuseforotherapplications.Thismaycausethemonitor
tomalfunction.
12. Input signal connector DVI-Dconnector(DVI-2:SingleLink)
13. Input signal connector DVI-Dconnector(DVI-1:DualLink)
14. Input signal connector DisplayPortconnector
15. USB upstream port ConnectstheUSBcabletousethesoftwarethatneedsUSBconnection,ortouse
USBHubfunction.
16. USB downstream port ConnectsaperipheralUSBdevice.
17. Security lock slot ComplieswithKensington’sMicroSaversecuritysystem.
18. mark Protectiveearthterminal
19. Stand Usedtoadjusttheheightandangleofthemonitorscreen.
20. Cable holder Coversthemonitorcables.
*1 For instructions for use, refer to the User’s Manual (on the CD-ROM).

3
English
Connecting Cables
Attention
• Check that the monitor and the PC are powered off.
• When replacing the current monitor with this monitor, be sure to change the PC settings for resolution and vertical scan
frequency to those that are available for this monitor. Refer to the compatible resolution table (back of cover page) before
connecting the PC.
Note
• When connecting multiple PCs to this product, or displaying the images from two signals at the same time using one PC,
refer to the User’s Manual (on the CD-ROM).
• When two signals are displayed at the same time using the “PinP” or “PbyP” functions, the following input signals are
displayed on the “Main” and “Sub” screens. For details, refer to the User’s Manual (on the CD-ROM).
- Main: DisplayPort or DVI-1
- Sub: DVI-2
1. Connect the signal cables to the input signal connectors and PC.
Check the shape of the connectors, and connect the cables.
After connecting the signal cable, tighten the screws of the connectors to secure the coupling.
DVI-2
DVI-1
DisplayPort
DVI
DVI
DisplayPort
Digitalconnection
(DisplayPort)
Signalcable:DisplayPort-DisplayPort
(supplied)
Digitalconnection
(DVI)
Signalcable:DVI-D-DVI-D(DualLink)
(supplied)
or
Signalcable:DVI-D-DVI-D(SingleLink)
(option)
2.
Plug the power cord into a power outlet and the power connector on the
monitor.
3.
Connect the USB cable when using RadiCS LE or ScreenManager Pro for
Medical.
ConnectingtotheMonitor ConnectingtoaComputer
4.
Press to turn on the monitor.
The monitor’s power indicator lights up green.
5.
Turn on the PC.
The screen image appears.
If an image does not appear, refer to “No picture” (page 6) for additional advice.

4
Attention
• Turn off the monitor and PC after using them.
• For the maximum power saving, it is recommended that the Power button be turned off. Turning off the main power switch
or unplugging the power cord completely shuts off power supply to the monitor.
Adjusting the Screen Height and Angle
Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel of the screen to the
best condition for working.
Attention
• Be sure that the cables are correctly connected.
Showing Button Guide
Press the front buttons (except button), the Button Guide appears above the button.
Note
• The Button Guide will continue to appear while the Adjustment menu or mode menu is showing.
• The Button Guide is displayed differently depending on the selected menu or status.

5
English
Selecting Display Mode
This function allows easy selection of a desired mode according to monitor application.
√:Calibrationisavailable.
Mode Purpose
1-DICOM AvailabletodisplayinDICOMmode. √
2-Custom Availableforthesettingaccordingtoyourpreference. √
3-CAL1/4-CAL2/5-CAL3 Displaysthescreenadjustedbycalibrationsoftware. √
6-Hybrid-γ Automaticallyidentifiesthe displayareaforthemonochromeand
colorimagesonthesamescreen,anddisplayseachsetstatus.
-
7-sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals. -
8-Text Suitablefordisplayingtextsforwordprocessingorspreadsheets. -
9-ALT*1 Suitablefordisplayingthecolorwiththebrightnessandgrayscale
appropriatefortheenvironmentalillumination.
-
*1 The items described above may not be displayed correctly depending on the usage environment. The quality of the
monitor cannot be managed using this mode.
Themodemenu
appears.
Procedure
1. Press .
The mode menu appears at the bottom left of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the mode with or while the mode menu is displayed.
→ 1-DICOM←→2-Custom←→3-CAL1←→4-CAL2←→5-CAL3←→6-Hybrid-γ←→ 7-sRGB←→ 8-Text ←→ 9-ALT ←
Controlling Monitor Quality
The quality control software “RadiCS LE” (for Windows) is included with this monitor.
To calibrate the monitor and manage the calibration history, install RadiCS LE with reference to the RadiCS LE User's
Manual (on the CD-ROM). Use the RadiCS SelfQC function and built-in Integrated Front Sensor to perform periodic
calibration and Grayscale Check for the monitor independently. For details, refer to the User’s Manual (on the CD-
ROM).
Attention
• Connect the monitor to the PC with a USB cable when using RadiCS LE.
Note
• To perform advanced quality control that conforms to medical standards, use the optional monitor quality control software
kit “RadiCS UX1”.

6
No picture
If a problem still remains after applying the suggested remedies, contact your local EIZO representative.
Problem Possible cause and remedy
1. No picture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnectedproperly.
• Turnthemainpowerswitchon.
• Press .
• Turnoffthemainpower,andthenturnitonagainafew
minuteslater.
• Powerindicatorislightinggreen. • Increase“Brightness”,“Contrast”,or“Gain”inthe
Adjustmentmenu.
• Powerindicatorislightingorange. • Switchtheinputsignal.Fordetails,refertotheUser’s
Manual(ontheCD-ROM).
• Operatethemouseorkeyboard.
• CheckwhetherthePCisturnedon.
• WhenPresenceSensorissetto“Auto”or“Manual”,the
monitormayhaveshiftedtothepowersavingmode.
Comeneartothemonitor.
• Powerindicatorashesorangeandgreen. • ThereisaprobleminthedevicethatusesDisplayPort
connection.Solvetheproblem,turnoffthemonitor,and
thenturnitonagain.Refertotheuser’smanualofthe
devicethatusesDisplayPortconnectionfordetails.
2. The message below appears. Thismessageappearswhenthesignalisnotinputcorrectly
evenwhenthemonitorfunctionsproperly.
• Thismessageappearswhennosignalis
input.
Example:
• Themessageshownleftmayappear,becausesomePCs
donotoutputthesignalsoonafterpower-on.
• CheckwhetherthePCisturnedon.
• Checkwhetherthesignalcableisconnectedproperly.
• Switchtheinputsignal.Fordetails,refertotheUser’s
Manual(ontheCD-ROM).
• Themessageshowsthattheinputsignalis
outofthespeciedfrequencyrange.
Example:
fD:DotClock
fH:HorizontalScanFrequency
fV:Verticalscanfrequency
• CheckwhetherthePCisconguredtomeettheresolution
andverticalscanfrequencyrequirementsofthemonitor
(see“CompatibleResolutions”).
• RebootthePC.
• Selectanappropriatedisplaymodeusingthegraphics
board’sutility.Refertothemanualofthegraphicsboard
fordetails.

1
Deutsch
Stelle der Warnungshinweise
Symbole am Gerät
Symbol Bedeutung
Hauptnetz-Schalter: Drücken,umdasNetzteildesMonitorsauszuschalten.
Hauptnetz-Schalter: Drücken,umdasNetzteildesMonitorseinzuschalten.
Netzschalter: Drücken,umdenMonitorein-undauszuschalten.
Wechselstrom
WarnungvorelektrischemSchlag
ACHTUNG: InformationenzudenSICHERHEITSSYMBOLENnden
SieindenVORSICHTSMASSNAHMEN.
Kein Teil dieses Handbuchs darf ohne die vorherige schriftliche Zustimmung von EIZO Corporation in irgendeiner
Form oder mit irgendwelchen Mitteln – elektronisch, mechanisch oder auf andere Weise – reproduziert, in einem
Suchsystem gespeichert oder übertragen werden.
EIZO Corporation ist in keiner Weise verpichtet, zur Verfügung gestelltes Material oder Informationen vertraulich
zu behandeln, es sei denn, es wurden mit EIZO Corporation beim Empfang der Informationen entsprechende
Abmachungen getroffen. Obwohl größte Sorgfalt aufgewendet wurde, um zu gewährleisten, dass die Informationen
in diesem Handbuch dem neuesten Stand entsprechen, ist zu beachten, dass die Spezikationen der Monitore von
EIZO ohne vorherige Ankündigung geändert werden können.

2
Verpackungsinhalt
PrüfenSie,obsichallederfolgendenGegenständeinderVerpackungbenden.SollteeinerderGegenstände
fehlenoderbeschädigtsein,wendenSiesichaneinenlokalenEIZO-HandelsvertreterinIhrerNähe.
Hinweis
• Heben Sie die Verpackung sowie die Verpackungsmaterialien für evtl. Transporte des Monitors gut auf.
• Monitor
• Netzkabel
• DigitalesSignalkabel:DisplayPort-DisplayPort
(PP300)
• DigitalesSignalkabel:DVI-D-DVI-D(DualLink)
(DD300DL)
• USB-Kabel:UU300
• EIZOLCDUtilityDisk(CD-ROM)
• Installationshandbuch(dasvorliegendeHandbuch)
• VORSICHTSMASSNAHMEN
• VESA-Befestigungsschrauben:M4×12:2St.
Steuerelemente und Funktionen
19
177
1 2 3 4 5 6 9 10 11 12 13 14 15 16
20
8
18
Justierungsmenü*1
1. Anwesenheitssensor ErkenntdieBewegungeinerPersonvordemMonitor.
2. Taste WechseltdenCALSwitch-Modus.
3. Taste AbbruchderEinstellung/JustierungundBeendendesJustierungsmenüs.
4. Taste Wähltunderhöht/verringertJustierungseinstellungenfürdieerweiterteJustierung
mithilfedesJustierungsmenüs.
5. Taste ZeigtdasJustierungsmenüan,wählteinElementimMenübildschirmundspeichert
geänderteWerte.
6. Taste • ZumEin-undAusschalten.
• ZeigtdenBetriebsstatusdesMonitorsan.
Grün:InBetrieb,Orange:Energiesparmodus,Aus:Hauptnetz/Netzschalteraus
7. Umgebungslichtsensor MisstdieUmgebungsbeleuchtung.
8. Integrierter Frontsensor
(Schiebe-Typ)
DientfürKalibrierungundGrauskalenprüfung.
9. Hauptnetz-Schalter SchaltetdasHauptnetzeinoderaus.
10. Netzanschluss DientzumVerbindendesNetzkabels.
11. PS/2-Anschluss DientzurWartung.NichtfürandereAnwendungenbenutzen.Dieskönnteeine
FehlfunktiondesMonitorsverursachen.
12. Signaleingäng DVI-D-Anschluss(DVI-2:SingleLink)
13. Signaleingäng DVI-D-Anschluss(DVI-1:DualLink)
14. Signaleingäng DisplayPort-Anschluss
15. USB-Ausgang DientzumAnschließendesUSB-KabelszurVerwendungvonSoftware,dieeine
USB-Verbindungbenötigt,oderzurVerwendungderUSB-Hub-Funktion.
16. USB-Eingang VerbindeteinUSB-Peripheriegerät.
17. Öffnung für
Diebstahlsicherung
KompatibelmitdemKensingtonMicroSaver-Sicherheitssystem.
18. -Markierung Schutzerdungsanschluss
19. Standfuß WirdzumJustierenderHöheunddesWinkelsdesMonitorbildschirmsverwendet.
20. Kabelabdeckung VerdecktdieMonitorkabel.
*1 Informationen zur Verwendung entnehmen Sie dem Benutzerhandbuch (auf der CD-ROM).