Eizo CuratOR EX2621 User manual

Important
Please read this “Installation Manual”, and “Instructions for Use”
(separate volume) carefully to familiarize yourself with safe and
effective usage.
Refer to the “Instructions for Use” for information on the installation /
connection of the monitor.
Color LCD Monitor
Installation Manual

2
This product has been adjusted specically for use in the region to which it was originally shipped. If
operated outside this region, the product may not perform as stated in the specications.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless
prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every
effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specications are subject to change without notice.

3
CONTENTS
CONTENTS
CONTENTS............................................................. 3
Chapter 1 Basic Adjustment / Setting.............. 4
1-1. Loading the Monitor Settings...................... 4
1-2. Switching Input Signals ............................... 5
1-3. Using Function Buttons ............................... 6
Chapter 2 Advanced Adjustment / Setting ...... 7
2-1. Operation via the Main Menu....................... 7
2-2. Individual Functions of Main Menu............. 8
●Input Cong..................................................... 8
●Video Cong...................................................10
●System Cong................................................12
●Function..........................................................14
●Window Cong...............................................16
●Remote...........................................................18
●Control........................................................... 20
Chapter 3 Troubleshooting.............................. 21
3-1. No Picture Displayed ...................................21
3-2. Imaging Problems....................................... 22
3-3. Other Problems........................................... 22
Chapter 4 Reference ........................................ 23
4-1. Main Default Settings ................................. 23
4-2. PinSpecications....................................... 24
Appendix.............................................................. 25
Trademark ............................................................... 25
License .................................................................... 25
LIMITED WARRANTY............................................. 26
Recycling Information ........................................... 27

4Chapter 1 Basic Adjustment / Setting
Chapter 1 Basic Adjustment / Setting
This chapter describes the basic functions that can be adjusted and set by pressing the buttons on the front
of the monitor.
1-1. Loading the Monitor Settings
It is possible to switch to PRESET, FACTORY, or the USER settings that have been set in advance.
PRESET Basic settings are made in advance at the factory. The settings of PRESET cannot be
changed.
FACTORY Returns to settings when shipped from the factory.
USER Various settings including menus can be made for personal use. For details, see “Preset”
(page 12).
1. Press (PRESET).
The preset menu is displayed.
2.
Press to select the PRESET number, FACTORY, or USER number to
load, and then press (ENTER).
The pre-made settings are loaded and the settings are changed. The selectable settings are as
follows.
• PRESET1 to PRESET5
• FACTORY
• USER1 to USER10
Note
• The “PRESET” menu will disappear after ve seconds have elapsed if no operation is performed.
• is displayed for the USER number that has already been registered.
• When selecting a USER number that has not yet been registered, “No Data” is displayed.
• For information about the main default settings, see “4-1. Main Default Settings” (page 23).

5
Chapter 1 Basic Adjustment / Setting
1-2. Switching Input Signals
Select the signal input to the monitor and display it on the screen.
1. Press (INPUT).
The “Input Select” menu appears.
2.
Press to select an input signal.
This switches to the selected input signal.
3.
Press (INPUT).
The menu screen exits.
Note
• If you press (INPUT) while the “Input Select” menu is displayed in multi screen mode, the “Input Select” menu
of the subscreen is displayed.
• When RGB / YPBPR is selected, if the color is abnormal, set it correctly with “Input Cong” (page 8) on the
main menu.
• The “Input Select” menu will disappear after ve seconds have elapsed if no operation is performed.

6Chapter 1 Basic Adjustment / Setting
1-3. Using Function Buttons
Execute the functions assigned to the function buttons (F1 ( ), F2 ( ), F3 ( ), F4 ( ) and F5
( )). For information on how to set a function to each button, see “Function” (page 14).
1. Press F1 ( ), F2 ( ), F3 ( ), F4 ( ) or F5 ( ).
The function menu is displayed.
2.
Press the button with the target function set while the function menu is
displayed.
Note
• In multi screen mode, press (INPUT) to select a screen to perform the desired function.
• When the setting of “Function Display” (page 15) is “Off”, the “INVALID FUNCTION” message is displayed if
you press a function button that cannot operate.
• When the setting of “Function Display” (page 15) is “Off”, the “UNDEFINED” message is displayed if you press
a function key assigned to “Undef”.

7
Chapter 2 Advanced Adjustment / Setting
Chapter 2 Advanced Adjustment / Setting
This chapter describes advanced monitor adjustment and setting procedures using the main menu.
2-1. Operation via the Main Menu
1. Menu display
1. Press (MENU).
The main menu is displayed.
2. Press to select the desired item, and then press .
2.
Adjusting / setting
1. Press to select the desired item.
2. Press to set.
If “Next Menu” is displayed for items, press , and a next menu is displayed.
3.
Exiting
1. If you repeatedly press (MENU), the menu screen exits.

8Chapter 2 Advanced Adjustment / Setting
2-2. Individual Functions of Main Menu
●InputCong
Setting for each input terminal.
Function Setting range Description
SDI Main Stream 1
Stream 2
Sets the picture on Main screen for dual-stream SDI
signal. This is also applied to the single screen mode.
SDI Sub Stream 1
Stream 2
Sets the picture on subscreen 1 for dual-stream SDI
signal.
RGB/YPBPRYPBPR
RGB-VIDEO
RGB-PC
Sets to match the connected signal at the Y/G, PB/B, PR/R
input terminal.
• “YPBPR”
Set to Y, PB/CB, or PR/CR signal.
• “RGB-VIDEO”
Set to RGB signals. Signal decision gives priority to
VIDEO system.
• “RGB-PC”
Set to RGB signals. Signal decision gives priority to
PC system.
HD15 RGB-VIDEO
RGB-PC
Sets to match signal connected to the HD15 input terminal.
• “RGB-VIDEO”
Signal decision gives priority to VIDEO system.
• “RGB-PC”
Signal decision gives priority to PC system.
Sync. Select (RGB) Auto
Sync on Green
VBS
Sets the synchronization signal input method for the RGB
input terminals.
• “Auto”
Automatically switches between SYNC input and
SYNC on G. When synchronized with SYNC input and
SYNC on G, SYNC input is given priority.
• “Sync on Green”
When synchronized with SYNC input and SYNC on G,
select this to synchronize with SYNC on G.
• “VBS”
Select this when connecting by synchronizing the
composite sync (VBS) signal with the SYNC input
terminal. E.g., when a non-synchronous R / G / B
image signal and a VBS signal output device are
connected to the monitor, connect the VBS signal to
the SYNC input terminal, and select VBS.

9
Chapter 2 Advanced Adjustment / Setting
Function Setting range Description
Sync. Select (HD15) Auto
Sync on Green
Sets the synchronization signal input method for the HD15
input terminal.
• “Auto”
Automatically switches between HD/VD input and
SYNC on G. When HD/VD input and SYNC on G are
synchronous, HD/VD input is given priority.
• “Sync on Green”
When HD/VD input and SYNC on G are synchronous,
select this to synchronize with SYNC on G
Analog
Adjustment
Auto Setup - Automatically adjusts “H Position”, “V Position”, and “Dot
Clock” when the PC signal is input.
H Position 0 to 300 To move screen left and right.
V Position 0 to 100 To move screen up and down.
Dot Clock 0 to 100 When a striped pattern is displayed, adjust so that noise
will decrease when the synchronous striped pattern (noise)
is produced.
Clock Phase 0 to 31 When inputting RGB signals and PC signals, adjust
for ease of viewing if bleeding or blurring of the screen
contour occurs.
Signal Format 4:3
Wide
Sets signal type for unidentiable signals.

10 Chapter 2 Advanced Adjustment / Setting
●VideoCong
Adjustments / settings for image display.
Function Setting
range Description
Color 0 to 100 Adjusts color depth of the image.
Tint 0 to 100 Adjusts skin tones.
Brightness 0 to 100 Adjusts image darkness (black).
Picture 0 to 100 Adjusts image contrast.
Edge Emphasis Sharpness
S.R.S.C.
Off
Displays a clearer image.
• “Sharpness”
Adjusts image contour emphasis. Changing the
“Emphasis Level” value will adjust the strength of
emphasis.
• “S.R.S.C”
Sharpens the image. Changing the “Emphasis Level”
value will adjust the strength of emphasis.
• “Off”
Returns to the normal display.
Emphasis Level (When
“Sharpness” is
selected)
1 to 20
(When
“S.R.S.C” is
selected)
Light
Middle
Heavy
Gamma 1.8 to 2.6
DICOM
Adjusts brightness variation.
Backlight 0 to 100 Adjusts brightness of backlight. In case of multiple windows,
select the main screen. The setting cannot be changed
when a screen other than the main screen is selected.
Color Temp 6500 K
9300 K
Off
Switches tone of the image.
R Gain 0 to 100 Adjusts the brightness of red in bright portions.