EK K4beam User manual

ＵＳＥＲ ＭＡＮＵＡＬ
www.eklights.com
Guangzhou Liangyi Lighting Equipments Co., Ltd .
37 Gongyedadao,Xinhua, Huadu,Guangzhou PC: 510800
Tel : (020 ) 666 090 88-8002 Fax: [phone]

CONTENTS
SAFETY
DIMENSIONS
DESCRIPTION
INTRODUCTION
PHOTOMETRICS
TECHNICAL SPECIFICATION
MENU
01
02
02
03
08
05
06
09
MENU DESCRIPTION
DMX CHANNELS
TROUBLE SHOOTING
10
11
15
INSTALLATION 04
www.eklights.com
DMX CONNECTION
POWER CONNECTION
04
GOBO & COLOR 07

TROUBLE SHOOTING
03
15
www.eklights.com
01
Problem Possible Causes Checklist and Remedies
Fixture does not light up
•No mains supply
•Dimmer fader set to 0
•All color faders set to 0
•Faulty LED
•Faulty LED board
•Check the power supply voltage
•Increase the value of the dimmer channels
•Increase the value of the color channels
•Replace the LED board
•Replace the LED board
General low light intensity
•Dirty lens assembly
•Misaligned lens assembly
•Clean the fixture regularly
•Install lens assembly properly
Fixture does not power up
•No power
•Loose or damaged power cord
•Faulty internal power supply
•Check for power on power outlet
•Check power cord
•Replace internal power supply
Fixture does not respond to DMX
•Wrong DMX addressing
•Damaged DMX cables
•Bouncing signals
•Check control panel and unit addressing
•Check DMX cables
•Install terminator as suggested
●
●
●
●
●
●
●
●
●
●
●
●
●
SAFETY
Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information
about the installation, usage and maintenance of the unit.
WARNING
General instruction
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with.
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
Never make any modifications on the unit not described in this instruction manual, otherwise you will
risk an electric shock.
Connection must be made to a power supply system fitted with efficient earthing (Class I appliance ac-
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
The connection to the main network of electric distribution must be carried out by a qualified electrical
installer. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
This unit is not for home use, only professional applications.
Never use the fixture under the following conditions:
-in places wet;
-in places subject to vibrations or bumps;
-in places with an ambient temperature of over 45°
Make certain that no inflammable liquids, water or metal objects enter the fixture.
All work must always be carried out by qualified technical personnel. Contact the nearest sales point
for an inspection or contact the manufacturer directly.
If the unit is to be put out of operation definitively, take it to a local recycling plant for a disposal
Warnings and installation precautions
If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
Before starting any maintenance work or cleaning the projector, cut off power from the main suply.
● Always additionally secure the projector with the safety rope. When carrying out any work, always comply
scrupulously with all the regulations (particularly regarding safety) currently in force in the country
in which the fixture’s being used.
●For inside use only. Not designed for outside use.
The minimum distance between the fixture and surrounding walls must be more than 50cm and the
air vents at the housing must not be covered in any case.
●
●
●
Install the fixture in a well ventilated place.
Keep any inflammable material at a safe distance from the fixture.
The maximum temperature that can be reached on the external surface of the fitting, in a thermally
steady state, is high. After power off, please cool down over 15 minutes.
●
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their effectiveness is impaired.
●The lamp(LED) shall be changed if it has become damaged or thermally deformed.
●Never look directly at the light beam. Please note that fast changes in lighting, e.g. flashing light,
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.

425
363
303
313 220
188
254
www.eklights.com
Brightest LED moving beam in its class
Tight, solid, consistent beams
Extensive rotating gobo pattern selection
Featuring color wheel, rotating gobos, prism
DESCRIPTION
02
DIMENSIONS

14
www.eklights.com
INTRODUCTION
0303
DISPLAY FUNCTION NAVIGATION
Mode
Menu
Up
Down
Enter
Function Description
Menu Options
Up
Down
Enter the Menu
Scroll Up
Scroll Down
Illustration
Menu Operation
Increase the numeric value
Decrease the numeric value
Save the function
1
2
3
4
567
1. Power Indicator 5. DMX 3pin & 5pin In/Out
2. DMX Indicator
6. Fuse：T3.15A 250V
3. Display：TFT220X176 7. PowerCon In/Out
4. Buttons
9
000-002 Position 1 (open)
003-005
006-008
009-011
012-014
015-017
018-020
021-023
024-026
027-029
030-032
033-035
036-038
039-041
042-044
045-047
048-050
051-053
054-063
064-073
074-083
084-093
094-103
104-113
114-123
124-133
134-143
144-153
154-163
164-173
174-183
184-193
194-203
204-213
214-223
224-238
239-240
241-255
10
000-020
021-127
128-255
11
000-255
000-127
128
129-255
12
000-039
040-049
050-059
060-069
070-079
080-089
090-099
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-255
DMX CHANNELS
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Position 9
Position 10
Position 11
Position 12
Position 13
Position 14
Position 15
Position 16
Position 17
Position 18
Position 18
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Position 9
Position 10
Position 11
Position 12
Position 13
Position 14
Position 15
Position 16
Position 17
Position 2 (Indexed with shake, from slow to fast)
Fast to Slow(Forward and Spin)
Stop (stop rotation)
Slow to Fast(Revers Spin)
Indexed
Rotation
Index
Fast to Slow
Stop
Slow to Fast
No function
Rotation
Index
Enable blackout while Pan/Tilt move (Hold 3 Second)
Disable blackout while Pan/Tilt move (Hold 3 Second)
Enable blackout while color change (Hold 3 Second)
Disable blackout while color change (Hold 3 Second)
Enable blackout while gobo change (Hold 3 Second)
Disable blackout while color change (Hold 3 Second)
Pan Reset (Hold 3 Second)
Tilt Reset (Hold 3 Second)
Color Reset (Hold 3 Second)
Gobo Reset (Hold 3 Second)
No function
Prism Reset (Hold 3 Second)
No function
Reset all(Hold 3 Second)
No function
Gobo
Prism
R Prism
Control

www.eklights.com
DMX512 控台
Subsequent
INSTALLATION
Truss
Mounting Clamp
Omega Bracket
Safety Cable
DMX CONNECTION
0304
1 Pan 000-255 Pan Coarse
2 Pan fine 000-255
3 T ilt 000-255 TiltC oarse
4Tiltfine 000-255
5M ovem ent 000-255 fastestto Slow est
6 Shutte
12CH
000-010 Shutterclosed
011-030 N o function (shutteropen)
031-085 Strobe effectslow to fast
086-105 N o function (shutteropen)
106-160 Pulse-effectin sequences
161-180 N o function (shutteropen)
181-235 R andom strobe effectslow to fast
236-255 N o function (shutteropen)
7 D im m er 000-255 0~ 100%
8 C olor
000-004 O pen
005-008 O pen+ Color1
009-012 C olor1
013-016 Color1 + C olor2
017-021 C olor2
022-025 Color2 + C olor3
026-029 C olor3
030-033 Color3 + C olor4󴖦
034-038 C olor4
039-042 Color4 + C olor5
043-046 C olor5
047-050 Color5 + C olor6
051-055 C olor6
056-059 Color6 + C olor7
060-063 C olor7
064-067 C olor7 + C olor8
068-071 C olor8
072-076 Color8 + C olor9
077-080 C olor9
081-084 Color9 + C olor10
085-088 C olor10
089-093 Color10 + C olor11
094-097 C olor11
098-101 Color11 + C olor12
102-105 C olor12
106-110 Color12 + C olor13
111-114 C olor13
115-118 Color13 + C olor14
119-122 C olor14
123-127 Color14 + O pen
128-189 Fastto Slow (Forw ard Spin)
190-193 Stop (Stop R otation)󴖦
194-255 Slow to Fast(R eversSpin)
DMX CHANNELS
13
Function Value Percent/Setting Remark

www.eklights.com
9Gobo
000-002
003-005
Position 1(open)
006-008
009-011
012-014
015-017
018-020
021-023
024-026
027-029
030-032
033-035
036-038
039-041
042-044
045-047
048-050
051-053
054-063
064-073
074-083
084-093
094-103
104-113
114-123
124-133
134-143
144-153
154-163
164-173
174-183
184-193
194-203
204-213
214-223
224-238
239-240
241-255
10
000-000
001-127
128-189
190-193
194-255
11 Control
040-049
050-059
060-069
070-079
080-089
090-099
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-255
DMX CHANNELS
03
12 0305
Power In Power out
DMX512 Controller
STARTING ADDRESS
4TH FIXTURE
MODE ALLOCATION STARTING ADDRESS
1ST FIXTURE
STARTING ADDRESS
2ND FIXTURE
STARTING ADDRESS
3RD FIXTURE
03411CH
12CH
001 -011 001 012 023
050002 -013 014 026 038
Relation between DMX and Address
DMX INPUT
1
3
2
1
3
2
COMMON
DMX十
DMX一
DMX OUTPUT 1
3
2
POWER CONNECTION
DMX INPUT
1
3
21
3
2
COMMON
DMX一
DMX十 DMX OUTPUT
4
5
45
1
3
2
4
5
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Position 9
Position 10
Position 11
Position 12
Position 13
Position 14
Position 15
Position 16
Position 17
Position 18
Position 2 (Indexed with shake, from slow to fast)
Position 3
Position 4
Position 5
Position 6
Position 7
Position 8
Position 9
Position 10
Position 11
Position 12
Position 13
Position 14
Position 15
Position 16
Position 17
Position 18
Fast to slow(foward wheel spin)
Slow to fast (Reverse wheel spin)
Stop
Index
Fast to Slow
Stop
Slow to fast
No Function000-039
No Function
No Function
No Function
Enable black out while Pan/Tilt move(Hold 3 seconds)
Disable black out while Pan/Tilt move(Hold 3 seconds)
Enable black out while color change(Hold 3 seconds)
Disable black out while color change(Hold 3 seconds)
Enable black out while gobo change(Hold 3 seconds)
Disable black out while gobo change(Hold 3 seconds)
Pan Reset(Hold 3 seconds)
Tilt Reset(Hold 3 seconds)
Color Reset(Hold 3 seconds)
Gobo Reset(Hold 3 seconds)
Prism Reset(Hold 3 seconds)
Reset all (Hold 3 seconds)
Prism Rot
Using POWER CON In/Out
Power cable connected in series
Attention:due to the power rating
one 1.5mm² power cable can connect 22 units maximum
WARNING
Do not connect more than 22 units in serieswith one power cable.
Do not use damaged power cables.
Turn off the power when the units are not in use.

www.eklights.com
0306
PHOTOMETRICS
Light Source: 100W 8000 - 10000K LED
Beam Angle: 2.5°
Output: 64500 LUX @ 5 meters
POWER
Mains: 100 - 240 VAC, 50/60 Hz
Consumption: 164W
Power connections: PowerCon In/Out
Power linking: Up to 23 units @ 230V
KEY FEATURES
Pan movement: 540°
Tilt movement: 270°
Color Wheel: 14 + Open
Gobo Wheel: 17 + Open
Strobe: 1 - 30Hz
Dimming: 4 dimming curve modes
Prism: 8-facet, bi-directional, variable-speed rotation
CONTROL
Protocol: DMX512
DMX channels: 11 / 12
Data connections: 3-pin / 5-pin XLR In/Out
Dispaly: OLED display with 4-button navigation
PHYSICAL
Size: 313x220x425
Weight: 13kg
IP: 20
TECHNICAL SPECIFICATION
03
11
1 Pan 000-255 Pan Coarse
2 P an f ine 000 -255
3Tilt 000 -255 T ilt Coarse
4T ilt f ine 000-255
5Movement 000-255 fastest to Slowest
6Shutter
000-010 Shutter closed
011-030 No function (shutter open)
031-085 Strobe effect slow to fast
086-105 N o function (shutter open)
106-160 Pulse-effect in sequences
161-180 N o function (shutter open)
181-235 R andom strobe effect slow to fast
236-255 N o function (shutter open)
7Dimmer 000-255 0~100%
8 C olor
000-004 Open
005-008 Open+Color1
009-012 Color 1
013-016 Color 1 + Color 2
017-021 Color 2
022-025 Color 2 + Color 3
026-029 Color 3
030-033 Color 3 + Color 4
034-038 Color 4
039-042 Color 4 + Color 5
043-046 Color 5
047-050 Color 5 + Color 6
051-055 Color 6
056-059 Color 6 + Color 7
060-063 Color 7
064
11 P
-067 Color 7 + Color 8
068-071 Color 8
072-076 Color 8 + Color 9
077-080 Color 9
081-084 Color 9 + Color 10
085-088 Color 10
089-093 Color 10 + Color 11
094-097 Color 11
098-101 Color 11 + Color 12
102-105 Color 12
106-110 Color 12 + Color 13
111-114 Color 13
115-118 Color 13 + Color 14
119-122 Color 14
123-127 Color 14 + O pen
128-189 F ast to Slow(Forward Spin)
190-193 Stop (Stop Rotation)
194-255 Slow to Fast(Revers Spin)
DMX CHANNELS

www.eklights.com
MENU DESCRIPTION
03
10
1.CONNECT
(1) DMX Address: Set DMX starting address from a value between 1-502
(2) DMX Mode: Selectable DMX mode 11/12 channels
2.SETUP
(1) Movement
1.Pan Inverse and Tilt Inverse setting
2.Pan Feedback and Tilt Feedback setting
(2) Screen
1.Back Light：set delay time for menu display to go dark at either 10,20 or 30 seconds or choose always ON.
2.Flip Display：adjust autometically
3.Warning Cue:
4.Key Lock：password: UP DOWN UP DOWN ENTER
(3) Fixture
1.Fan Mode: fan speed setting
2.Temperature
(4).AUTO TSET
(5).Manual Test
3. ADVANCED
(1).Reset
1.All: reset all the steps
2.reset seperate step
(2).Adjust
(3).Factory Reload
Restore factory settings
4.INFORMATION
(1).Fixture Time(0-9999 hours）
(2).Temperature
(3).Fan speed
(4).Software Version
(5).UID
03
07
GOBO AND COLOR
Gobo Wheel Color Wheel
Yellow
Blue
Color
Red Blue Yellow Green Light Orange Magenta Cyan
CTO Dark Green CTB Pink Light Green Orange UV
Red
Green Light
Orange
Magenta
Cyan
CTO
Dark
Green
CTB
UV
Orange
Light
Green Pink

www.eklights.com
0308
358 10
Full on
Distance/m
Output 15
23360
Beam Angle: 2.5°
luminance(lux)
Project Distance(m)
FULL on
3m 5m 8m 10m
23360
15m
64500
64500
1CONN ECT
DMX Address 1-512
DMX Mode
11CH
12CH
2SET UP
Movement
Pan Inverse No
Y es
T ilt I nverse N o
Y es
Pan Feedback
No
Y es
T ilt No
Y es
Screen
Back Light
On
10s
20s
30
Flip D isplay No
Y es
Warn Cue Off
On
Key Lock No
Y es
Fixure
Fan mode Auto
High
Temperature unit ° C Default: °C
° F
Auto T est
Auto T est …
Manual T est
Pan
000-255
Pan Fine
000-255
T ilt
000-255
T ilt F ine
000-255 T ilt:= 128
P/ T Speed 000-255 D immer=255
Dimmer
000-255
Shutter = 255
Shutter 000-255
Color 000-255
Gobo
000-255
Prism 000-255
3ADVANCED
Reset
All N o-Y es
Pan
N o-Y es
T ilt N o-Y es
Color N o-Y es
Gobo
N o-Y es
Prism N o-Y es
Adjust
Pan Offset 000-255
T ilt O ffset 000-255
Color Offset 000-255
Gobo Offset 000-255
Prism Offset 000-255
Factory Reload No
Y es
4INFORMATION
0-9999
Temperature 58 °C
FanSpeed
**%
Software Version
DI SP- V1.0
CT R 1-X Y - V 1.0
CT R 2-MO T OR -V 1.0
UID
030F01E *****
5
Stand Alone Play
Maser/ Slave Maser Default: Slave
Slave
Sequence
Show 1
Default: Show 1
Show 2
Show 3
Show 4
0309
MENU
179000 16100 7200
179000 16100 7200
PHOTOMETRICS
Fixture Time
Default: Yes
Default: No
Default: On
Default: No
Default: On
Default: Yes
Default: Yes
Default: No
Default: No
Default: 12CH
Default: 1
Feedback
s
Default: 0
Speed 001-100 Default: 100