EK E1profile User manual

USER MANUAL
www.eklights.com
Guangzhou Liangyi Lighting Equipments Co., Ltd .
37 Gongyedadao,Xinhua, Huadu,Guangzhou PC: 510800
Tel : (020)666 090 88- 8002 Fax: (020) 868 670 11

TROUBLE SHOOTING
03
21
CONTENTS
SAFETY
DIMENSION
DESCRIPTION
INTRODUCTION
PHOTOMETRICS
TECHNICAL SPECIFICATION
MENU
01
02
02
03
11
05
09
12
MENU DESCRIPTION
DMX CHANNELS
TROUBLE SHOOTING
15
17
21
INSTALLATION 04
www.eklights.com
DMX CONNECTION
POWER CONNECTION 05
RDM CONTROL 07
W-DMX CONTROL 07
GOBOS 10
Problem Possible Causes Check list and Remedies
Fixture does not light up
•No mains supply
•Dimmer fader set to 0
•All color faders set to 0
•Faulty LED
•Faulty LED board
•Check the power supply voltage
•Increase the value of the dimmer channels
•Increase the value of the color channels
•Replace the LED board
•Replace the LED board
General low light intensity •Dirty lens assembly
•Misaligned lens assembly
•
•Install lens assembly properly
Fixture does not power up
•No power
•Loose or damaged power cord
•Faulty internal power supply
•Check for power on power outlet
•Check power cord
•Replace internal power supply
Fixture does not respond to DMX
•Wrong DMX addressing
•Damaged DMX cables
•Bouncing signals
•Check control panel and unit addressing
•Check DMX cables
•Install terminator as suggested

01
20
DMX CHANNELS
37
000-009
010-019
020-029
030-039
040-049
050-059
060-069
070-079
080-089
090-099
100-109
110-119
120-129
130-139
140-149
150-159
160-169
170-179
180-189
190-199
200-209
210-219
220-229
230-239
240-249
250-255
38
000-051
052-101
102-152
153-203
204-255
www.eklights.com
●
●
●
●
●
●
●
●
●
●
●
●
●
SAFETY
Before carrying out any operations with the unit, carefully read this instruction
manual and keep it with cure for future reference. It contains important information
about the installation, usage and maintenance of the unit.
WARNING
General instruction
The products referred to in this manual conform to the European Community Directives and are there-
fore marked with.
The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.
risk an electric shock.
f
cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units
from indirect contact and/or shorting to earth by using appropriately sized residual current devices.
installe r. Check that the main frequency and voltage correspond to those for which the unit is designed
as given on the electrical data label.
This unit is not for home use, only professional applications.
-in places wet;
-in places subject to vibrations or bumps;
-in places with an ambient temperature of over 45°
for an inspection or contact the manufacturer directly.
y, take it to a local recycling plant for a disposal
Warnings and installation precautions
If this device will be operated in any way different to the one described in this manual, it may suffer
damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
short circuit, burns, electric shock, etc.
Before starting any maintenance work or cleaning the projector, cut o
●
Always additionally secure the projector with the safety rope. When carrying out any work, always comply
scrupulously with all the regulations (particularly regarding safety) currently in force in the country
’s being used.
●For inside use only. Not designed for outside use.
air vents at the housing must not be covered in any case.
●
●
●
steady state, is high.
After power off, please cool down over 15 minutes.
●
Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent
that their e ffectiveness is impaired.
●The lamp(LED) shall be changed if it has become damaged or thermally deformed.
●
may trigger epileptic seizures in photosensitive persons or persons with epilepsy.
Dimmer Speed mode
Dimmer Speed mode o
Dimmer Speed mode1(fast speed)
Dimmer Speed mode2 (middle speed)
Dimmer Speed mode3(slow speed)
Preset dimmer speed from display menu
Fr.shutters Rot. Reset (Hold 3 second)
Fr.shutters 1 M 1 Reset (Hold 3 second)
Fr.shutters 1 M 2 Reset (Hold 3 second)
Fr.shutters 1 M 3 Reset (Hold 3 second)
Fr.shutters 1 M 4 Reset (Hold 3 second)
Fr.shutters 1 M 5 Reset (Hold 3 second)
Fr.shutters 1 M 6 Reset (Hold 3 second)
Fr.shutters 1 M 7 Reset (Hold 3 second)
Fr.shutters 1 M 8 Reset (Hold 3 second)
No Function
Reset all (Hold 3 second)
No Function
No Function
Enable blackout while Pan/Tilt move (Hold 3 second)
Disable blackout while Pan/Tilt move (Hold 3 second)
Enable blackout while gobo change (Hold 3 second)
Disable blackout while gobo change (Hold 3 second)
Pan Reset (Hold 3 second)
Tilt Reset (Hold 3 second)
Gobo Reset (Hold 3 second)
Prism Reset (Hold 3 second)
Eect Reset (Hold 3 second)
Focus Reset (Hold 3 second)
Zoom Reset (Hold 3 second)
Frost Reset (Hold 3 second)
Iris Reset (Hold 3 second)
Control

Four independent framing shutters and
dozens of pre-programmed beam-shaping macros
Featuring rotating gobos, animation wheel,
sharp focus, frost, prism, iris, 4 x zoom
DESCRIPTION
02
02
DIMENSION
681.5
402
260
240
355
DMX CHANNELS
03
19
24 26 Framing shutters rotation
000-127
128
129-255
25 27 000-255
26 28
000-127
128
129-255
27 29 000-255
28 30
000-127
128
129-255
29 31 000-255
30 32
000-127
128
129-255
31 33 000-255
32 34
000-127
128
129-255
33 35
000-003
004-011
012-018
019-025
026-032
033-039
040-047
048-054
055-061
062-068
069-075
076-082
083-090
091-097
098-104
105-111
112-118
119-125
126-133
134-140
141-147
148-155
156-161
162-168
169-176
177-183
184-190
191-197
198-204
205-211
212-219
220-226
227-233
234-240
241-247
248-
255
34 36 000-255
www.eklights.com
Framing shutter 1 movent
Framing shutter 1 swivelling
Framing shutter 2 movent
Framing shutter 2 swivelling
Framing shutter 3 swivelling
Framing shutter 3 movent
Framing shutter 4 movent
Framing shutter 4 swivelling
Framing shutters macros
Framing shutters macros speed
Rotation from left to center
Center
Rotation from center to right
Swivelling from -25 degrees towards 0 degrees
Movement from outward to inward
0 degrees
Swivelling from 0 degrees towards +25 degrees
Movement from outward to inward
Swivelling from -25 degrees towards 0 degrees
0 degrees
Swivelling from 0 degrees towards +25 degrees
Swivelling from 0 degrees towards +25 degrees
Movement from outward to inward
Swivelling from -25 degrees towards 0 degrees
0 degrees
Movement from outward to inward
Swivelling from -25 degrees towards 0 degrees
0 degrees
Swivelling from 0 degrees towards +25 degrees
No Function
Macro 1
Macro 2
Macro 3
Macro 4
Macro 5
Macro 6
Macro 7
Macro 8
Macro 9
Macro 10
Macro 11
Macro 12
Macro 13
Macro 14
Macro 15
Macro 16
Macro 17
Macro 18
Macro 19
Macro 20
Macro 21
Macro 22
Macro 23
Macro 24
Macro 25
Macro 26
Macro 27
Macro 28
Macro 29
Macro 30
Macro 31
Macro 32
Macro 33
Macro 34
Macro 35
Speed from slow to fast

18
DMX CHANNELS
www.eklights.com
12 14 Rotating gobo wheel
000-005
006-010
011-015
016-020
021-025
026-030
031-035
036-040
041-055
056-070
071-085
086-100
101-115
116-130
131-145
146-200
201-255
13 15 000-255
14 16
000-191
192-221
222-225 Stop
226-255
15 17
000-005
006-191
192-223
224-255
16 18 000-255
17 19 000-255
18 20 000-255
19 21 000-255
20 22 000-255
21 23 000-007
008-255
22 24
000-127
128-189
190-193
194-255
23 25
000-063
064-127
128-191
192-255
INTRODUCTION
0303
13
2
4
5
6
7
1.Tilt lock
2.Pan lock
3.Fast lock screw
4.Buttons:
Display Function Navigation
Mode
Menu
Up
Down
Enter
Function Description
Menu option
Up
Down
Enter the menu
Scroll up
Scroll down
Illustration
Menu operation
Increase the numeric value
Descrease the numeric value
Save the function
5.Display
6.Power indicator
7.DMX indicator
OK Save the function
Rotating gobo wheel Fine
Rotating gobo
Prism Rot.
Frost
Focus
Focus Fine
Zoom
Zoom Fine
Iris
No Function
CW Rotation Fast to Slow
Stop Rotation
CCW Rotation Slow to Fast
From large to small
Zoom
Focus Fine
Focus
Frost 0-100%
Open
Insertion and Positioning from 0-360(Continuous)
Slowest to fastest (Forward Spin)
Fastest to Slowest (Reverse Spin)
Fastest to Slowest (Reverse Spin)
Slowest to fastest (Forward Spin)
Positioning from 0-360 degrees(Indexing)
Open
Position 1
Position 2
Position 3
Position 4
Position 5
Position 6
Position 7
Position 2 (Position 2 Shake , from slow to fast)
Position 1 (Position 1 Shake , from slow to fast)
Position 3 (Position 3 Shake , from slow to fast)
Position 5 (Position 5 Shake , from slow to fast)
Position 4 (Position 4 Shake , from slow to fast)
Position 6 (Position 6 Shake , from slow to fast)
Position 7 (Position 7 Shake , from slow to fast)
Stop to fast (Forward Wheel Spin)
Stop to Slow (Reverse Wheel Spin)

04
INTRODUCTION
www.eklights.com
89 10 11 12 13 14
15
16
8.Power In
9.Power Out
10.fuse T5A/250V
11.Art-net In
12.Art-net Out
13.DMX In
14.DMX Out
15.Fast lock
16.Wireless atenna
INSTALLATION
Truss
Mounting Clamp
Omega bracket
Safety cable
DMX CHANNELS
03
17
1 1 000-255
2 000-255
2 3 000-255
4 000-255
3 5 000-255
4 6
000-031
032-063
064-095
096-127
128-159
160-191
192-223
224-255
5 7 000-255
6 8 000-255
7 9 000-255
8 10 000-255
9 11 000-255
10 12
000 -019
020 -039
040 -059
060 -079
080 -099
100 -119
120 -255
11 13
000 -223
224 -228
229 -233
234 -238
239 -243
244 -248
249– 255
000-255
000-255
000 -000
001 – 001
002 -002
003 – 003
004 -004
005 – 046
047 -088
089 -130
131 -172
173 -214
215 -255
36CH 38CH Function Value Percent/Setting Remark
Pan
Pan Fine
Tilt
Tilt Fine
Movement
Shutter
Dimmer
Red
Green
Blue
White
Color function
Color Red
Green
Blue
White
Black Continuous
Rainbow Eect (Slow to Fast)
Rainbow Eect (Slow to Fast)
Forward Spin
Reverse Spin
2000K - 2700K
White 2700K
White 3200K
White 4200K
White 5600K
White 6500K
White 8000K
CTC Function
CTC Function
No Function No Function
Forward Spin
Reverse Spin
CTO Function
Continuous
TBD
Allow next channel CTC Function
Allow correspondent next channel function
Allow correspondent next channel function
Allow correspondent next channel function
Reserved for future functions (no function)
0 - 100%
0 - 100%
0 - 100%
0 - 100%
0 - 100%
Shutter closed
No function (shutter open)
No function (shutter open)
No function (shutter open)
No function (shutter open)
Shutter eect slow to fast
Pulse-eect in sequences
Random shutter eect slow to fast
Pan Coarse
Pan Fine
Tilt Coarse
Tilt Fine
Fastest to Slowest
Red=0, Green→up, Blue=full, White=0
Red=0, Green=up, Blue→full, White=0
Red→0, Green=up, Blue=full, White=0
Red=0, Green=up, Blue=full, White=0
Red=0, Green=up, Blue→full, White=0
Red→0, Green=up, Blue=full, White=0

POWER CONNECTION
0305
Power In Power out
DMX CONNECTION
Subsequent
DMX512 Controller
16
MENU DESCRIPTION
www.eklights.com
4.INFORMATION
(1).Fixture Time(0-9999 hours)
(2).Temperature(running temperature)
(3).Fan speed
(4).Software Version
(5).UID
Using POWER CON In/Out
Power cable connected in series
Attention:due to the power rating ,
one 1.5mm² power cable can connect 3 units maximum
Do not connect more than 3 units in series with one power cable.
Do not use damaged power cables
WARNING

DMX512 Controller
MODE ALLOCATION STARTING ADDRESS
1ST FIXTURE
10936CH
38CH
001-036 001 037 073
116002-039 002 040 078
Relationg between DMX and Address
ADR CONTROL
06
DMX CONNECTION
www.eklights.com
DMX INPUT
1
3
2
1
3
2
COMMON
DMX十
DMX一
DMX OUTPUT 1
3
2
MENU DESCRIPTION
03
15
1.Connection
(1)DMX Address Setting
1. 36CH: value between 1-477
2. 38CH: value between 1-475
(2)
(3)Ethernet(art-net) Setting
1. Universe :value between 0-255
2. Start Channel:starting address setting
3. IP Address setting
2. SETUP
(1)Movement
1. Pan/Tilt inverse
2. Pan/Tilt Feedback
(2)Screen
1. Back Light:Set delay time for menu display to go dark at either 10, 20 or 30 seconds or choose always ON.)
2. Flip Display
3. Warning Cue
4. Key Lock:password: Up down up down enter.
(3)Fixture Setting
1. White Balance:
2. Dimmer Mode:4 dimming curve modes
3. Fan Mode: Auto
4. Theatre Mode:
1)Auto mode: fan speed is changable along with the temperature
2)Silent mode:fan stop running
3)o mode
5. Temperature
(4).AUTO TSET
(5).Manual Test
3. ADVANCED
(1). Reset
(2). Adjust
(3). Factory Reload
STARTING ADDRESS
2ND FIXTURE
STARTING ADDRESS
3RD FIXTURE
STARTING ADDRESS
4TH FIXTURE

3 A D V A N C E D
Reset
A ll
Pan
Tilt
G obo
Prism
E ffect
Focus
Z oom
Frost
Iris
Fr.shuttersRot.
Fr.shutter1 M 1
Fr.shutter1 M 2
Fr.shutter2 M 1
Fr.shutter2 M 2
Fr.shutter3 M 1
Fr.shutter3 M 2
Fr.shutter4 M 1
Fr.shutter4 M 2
A djust
Pan 000-255
Tilt 000-255
G obo 000-255
RG obo 000-255
Prism 000-255
E ffect 000-255
Focus 000-255
Z oom 000-255
Frost 000-255
Iris 000-255
Fr.shutters Rot. 000-255
Fr.shutter1 M 1 000-255
Fr.shutter1 M 2 000-255
Fr.shutter2 M 1 000-255
Fr.shutter2 M 2 000-255
Fr.shutter3 M 1 000-255
Fr.shutter3 M 2 000-255
Fr.shutter4 M 1 000-255
Fr.shutter4 M 2 000-255
Factory Reload N o
Y es
4 IN F O RM A TIO N
Fixture Tim e 0-9999 D efault:0
Tem perature 58 °C
FansSpeed **%
Softw are V ersion
D ISP -V 1.0
N E T-V 1.0
C TR1-X Y -V 1.0
C TR2-M O TO R -V 1.0
C TR3-M O TO R -V 1.0
C TR4-M O TO R -V 1.0
C TR5-M O TO R-V 1.0
U I
D15D 00213****
14
MENU
0307
W-DMX
W-DMX CONTROL
RDM CONTROL
。
:
1.start address: value between 001-512(default:001)
2.perset channel mode :36/38 CH
3.moving light options:Pan/Tilt Inverse
4.Display Invert: autometial and manual
5.factory set
www.eklights.com

08
W-DMX CONTROL
www.eklights.com
x
Connected with Transmitter
Seconds:Authorization with transmitter
Continuous: No previous connected transmitter found
No wireiess connection
Free to connect with any transmitter
xConnection lost
MENU
03
13
2
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255
Dimmer=255
Shutter=255
Tilt=128
Dimmer
Blue
Green
White
Gobo
R Gobo
Manual Test
Prism Rot.
Eect
R Eect
Focus
Zoom
Frost
Iris
Fr.shutters Rot.
Fr.shutter 1 Move.
Fr.shutters 1 Swiv.
Fr.shutter 2 Move.
Fr.shutters 2 Swiv.
Fr.shutter 3 Move.
Fr.shutters 3 Swiv.
Fr.shutter 4 Move.
Fr.shutters 4 Swiv.
Red
Shutter
P/T Speed
Tilt Fine
Tilt
Pan Fine
Pan
Auto Test Auto Test
SETUP
Default:

TECHNICAL SPECIFICATION
0309
Photometric
Light Source: 400W RGBW
Beam Angle: 10°-40°
Output: 6635 /670 lux @5m
Power
Mains: 100 - 240 VAC, 50/60 Hz
Consumption: 463W
Connection
power linking max connection: 3/230V
DMX linking max connection:13
Power connections:power con
Data connections:3- pin XLR In/Out; RJ45 In/Out
Key Feature
Color mixing: RGBW
Pan movement: 540°
Titl movement: 270°
CTC presets: 2000K - 8000K
Rotating gobos: 7 + 1
animation
framing shutters: 4 (rotatable)
Focus: motorized
Zoom: 10 - 40°
Iris: 5% - 100%
Frost: 0% - 100%
Strobe: 0 - 30Hz
Dimmer: 4 dimming curve modes
Prism: 3-facet
Control
Protocol: DMX / Artnet / W-DMX
DMX channels: 36 / 38
Display: TFT220x176
Built-in programs: 35 framing macros
Physical
Size: 355x260x682
Weight: 26.5kg
IP rating: 20
12
MENU
www.eklights.com
M (-)enu
Main M enu Menu level 2 Menu level 3 Menu level 4 R emark
1 C O N N E C T
DM X A ddress 1-512
DM X M ode
BA SIC 8-36C H
BA SIC 16-38C H
Wireless
Receive O n/Off O n
Off
Receive Reset N o
Y es
E thernet
U niverse 0-255
Start C hannel 1-512
IP A ddress 2.133.139.215
2
SE TU P
M ovem ent
Pan Reverse
No
Yes
TiltReverse
No
Yes
Pan Feedback
No
Yes
TiltFeedback
No
Yes
Screen
Back Light
O n
10s
20s
30
FlipDisplay
No
Yes
Auto
Warn Cue Off
On
Key Lock No
Yes
Fixture
White Balance
Off
M anual Red < 125-255>
G reen < 125-255>
Blue < 125-255>
W hite < 125-255>
Dimm er Mode
O ff
Dimmer 1
Dimmer 2
Dimmer 3
Fan Mode A uto
High
Theatre M ode
A uto
Silent
O ff
Temperature unit °C
°F
Default: No
Default: No
Default: No
Default: No
Default: No
Default: No
Default: No
Default: Yes
Default: Yes
Default: 1
Default: 38CH
Default: O
Default: 1
Default: 0
Default: O
Default:
RGBW = 255
Default: O
Default: Auto
Default: Auto
Default: °C

animation
10
GOBO INTALLATION
www.eklights.com
rotating gobo
spring
gobo
gobo holder
GOBOS
PHOTOMETRICS
0311
1357
R
W
G
B
distance/m
color 10
4083 1470 750 367
77750 8638 3110 1586 777
10500 1166 420 214 105
106750 11861 4270 2178 1067
200500 22277 8020 4090 2005
Beam angle: 10°
luminance (lux)
Project Distance(m)
FULL
1m
200500
3m
22277
5m
8020
7m
4090
10m
2005
36750
RGBW
1357
R
W
G
B
distance/m
color 10
394 142 72 35
7650 850 306 156 76
1025 89 32 16 8
10375 1152 415 211 103
19500 2166 780 397 195
Beam angle: 40°
luminance(lux)
Project Distance(m)
FULL
1m
19500
3m
2166
5m
780
7m
397
10m
195
3550
RGBW
Table of contents
Other EK Dj Equipment manuals