3
1. Safety Instructions
Safety Notes
• Ask a skilled technician before any repair.
• Always make sure the power is disconnected from the source before setting up, serving and
moving.
• Avoid direct eye exposure to the fixture when it is on.
Safety instructions
• Make sure the power supply voltage are consistent with this lights
• Ensure the use of voltage is in the range of the request technical parameter.
• Before the installation, please check the light’s fasteners and mechanical structure have been
received in good condition and appear no damage.
2. Menu
ADDR DMX address: A001---A512
CHND Channel mode:6CH, 12CH
SLND Slave mode:MAST, SL 1,SL 2,
SHND The effect of selection SH 0----SH24,
SOUD Sound mode: ON, OFF
SENS The sound control sensitivity (0 off, the 100 most sensitive)
BLND Black out mode:YES, NO
LED LED display :ON, OFF
DISP Display inversion:YES, NO
1TIL The 1 reverse motor:YES, NO
2TIL Motor 2 ReverseYES, NO
TEST Tesst mode:Sdlftest
FHRS Using time of light shown
VER The software version number V101RSET
YES, NO Restore factory settings