Electro-Voice EVID C10.1 User manual

Key Features:
• 10" High-Excursion Transducer for
extended LF
• Low Pass Network with Overload Protection
• Front Baffle Wattage Tap Adjustment
• Integrated low loss matching transformer
allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy
installation
• Integrated ported enclosure for extended bass
response
EVID C10.1 Ceiling
10” Subwoofer Ceiling
Loudspeaker System
General Description:
The Electro-Voice ® EVID C10.1 loudspeaker system is a
complete low frequency ceiling subwoofer package. The EVID
C10.1 is designed to augment the low frequency response of
any EVID ceiling speaker. The package consists of a bezel
assembly, grille, rear enclosure, 10-inch loudspeaker and
internal line-matching transformer. The EVID C10.1
loudspeaker utilizes a 2nd order crossover network to provide
the correct bandpass frequency response for use with any
EVID Ceiling loud speaker. The C10.1 utilizes a transformer
that offers a selection of 7.5 (70-V only), 15, 30 or 60 watts
delivered to the loudspeaker system using either 70-V or 100-V
lines, or 8 ohm bypass. Selection is via a convenient switch on
the front baffle. The perforated grille is finished in semi-gloss
white powder-coated enamel. The baffle and bezel are
constructed from UL 94V-0 rated ABS. The rear enclosure is
constructed from zinc-plated, heavy gauge steel. The rear
enclosure, with fiberglass damping material, provides an
optimum internal volume for extended low-frequency
performance. A rear cover, with provisions for a junction box
fitting, provides access to a 4-pin terminal block that allows
direct connection to the speaker with 12 gauge wire and
provides full-range pass through to additional speakers. A tile
bridge is included for safe suspension of the C10.1 ceiling
systems in a drop ceiling that uses mineral wool, or other fiber-
based ceiling tiles. The EVID line of ceiling speakers has been
designed to work together as a complete system in a wide
range of different ceiling constructions. They provide wide
dispersion, high-efficiency, high-maximum output, ease of
installation, and wide-range reproduction of music.
Technical Specifications:
:)Bd01-(esnopseR.qerFzH081-zH54
:)lacinoC(egarevoC°081
:gnildnaHrewoPkaePW006/.tnoCW051
:)m1/W1LPS(ytivitisneSBd49
:LPSdetaluclaCxaMBd021
:ecnadepmI)ssapybremrofsnart(lanimonsmhO8
:krowteNtco/Bd21
:recudsnarTFL)mm002(.ni01
:spaTremrofsnarTW06ro03,51,5.7:V07
W06ro03,51:V001
smhO8:ssapyB
:srotcennoCwercshtiw,elbavomerepytxineohP
21stpecca,"urht-pool"dnaslanimret
eriwag
:lairetaMerusolcnESBAdetarO-V49LU-elffaB
leetsdetalpcniZ-nackcaB
:ellirGhtiwleetsdetaocredwopdetarofreP
rehtetytefas
:erawdraHtroppuS,troppusetalpgnikcab,egdirbeliT
dleihstniap,etalpmettuotuc
:).aiDxH(miD"6.21x"9.11
)mm023xmm303(
:eziStuotuC)mm423("57.21
:)hcae(thgieWteN)gk0.7(sbl5.51
:)riap(thgieWgnippihS)gk5.51(sbl0.43
All Specifications based on Half Space Environment in ceiling.

Architects’ & Engineers’ Specifications: Frequency Response:
Dimension Drawings: Block Diagram:
Performance Match:
• CPS-1 Power Amplifier
• CPS-2 Power Amplifier
• CPS-2T Power Amplifier
• MA-1206 Mixer Amplifier
• MA-1212 Mixer Amplifier
EVID C10.1 Part Number
• 301263-000
12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]
www.electrovoice.com
© Telex Communications, Inc. 8/2002
Part Number 38110-128 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
The EVID C10.1 loudspeaker system shall be comprised of a UL
94V-0 fire rated ABS baffle/bezel assembly, zinc plated steel rear
enclosure, powder coated grille with safety tether, transformer
with 8 ohm bypass and 10-inch polypropylene low frequency
transducer. The loudspeaker shall meet the following criteria:
power rating shall be 100 watts of EIA RS-426A continuous pink
noise (6 dB crest factor). Frequency response, 45 Hz to 180 Hz.
Pressure sensitivity, 94 dB SPL at 1meter (3.3 feet) on axis with
one watt of pink noise (ref. 20µPa). Minimum impedance, 6.0
ohms. The loudspeaker shall be 320 mm (12.6 in.) in diameter
and 303 mm (11.9 in.) deep. Weight shall be 7.0 kg. (15.5 lb). The
subwoofer ceiling loudspeaker shall be the Electro-Voice ® model
EVID C10.1.