Electro-Voice 12" Powered Subwoofer System EVID 12.1P User manual

KeyFeatures:
• 650W Dynamic Power
• 12-inch High-Excursion LF Transducer
• Trapezoidal Shape allows for flexible
placement
• Secure Reinforced Cabinet Construction
with Mounting Hardware included
• High Sensitivity, 126 dB Max SPL1
• Paintable Enclosure available in Black or
White Finishes
• High-Pass Filtered Line Output
• Variable Active Crossover
EVID 12.1P Subwoofer
12” Powered Subwoofer
System
General Description:
The Electro-Voice ® EVID 12.1P is a subwoofer system designed
to complement the EVIDTM line of full-range loudspeakers. The
12.1P is ideal for supplementing the bass response of any EVIDTM
model in an indoor application. It is particularly useful in sports
bars, dance floors, retail environments, health clubs, restaraunts,
etc. The 12.1P adds the extra dimension of a powerful low end
where foreground music is desired. Its 650 watts of dynamic
power and 126 dB maximum sensitivity1is enough to satisfy
any music requirement when used with EVIDTM Surface Mount
Speakers.
The 12.1P’s slot-loaded design allows for flexible mounting and
placement while delivering the smoothest bass response
possible. Reinforced steel-fastener construction and the low-
profile bracket allow for a variety of wall, corner and ceiling
mounting configurations.
The 12.1P is available in black or white, and can easily be painted
to match the decor. All mounting hardware is included.
Technical Specifications:
:)Bd01-(esnopseR.qerFzH061-zH24
LPSdetaluclaCxaM
1
:Bd621
:rewoPreifilpmAFLsuounitnoCW003,tsruBsm05W056
:ytivitisneStupnIeniLtuptuOlluFrofuBd0otuBd21-
:recudsnarTFLlauDnoisrucxE-hgiH)mm003("21
lioC-ecioV
:srotcennoC
:stupnIeniL
:stuptuOdecnalaB
RLX
RLX
:tnemeriuqeRrewoPzH06-05,CAV031-011
:lairetaMerusolcnEdecrofnieRrenetsaFleetS,FDM
:seirosseccAdedulcnIerawdraHdnatekcarBgnitnuoM
:)DxWxH(miD"0.21x"0.32x"52.61
)mm503xmm485xmm214(
:thgieWteN)gk2.22(sbl0.94
:thgieWgnippihS)gk9.52(sbl0.75
11/8 Space (Corner Mounting) @ 1 Meter

Architects’ & Engineers’ Specifications: Frequency Response:
Block Diagram:
PerformanceMatch:
• EVID 3.2(t) Surface Mount Speaker
• EVID 4.2(t) Surface Mount Speaker
• EVID 6.2(t) Surface Mount Speaker
EVID 12.1P Part Number
• 301364-001
12000 Portland Avenue South, Burnsville, MN 55337
Phone:[phone], Fax:[phone]
www.electrovoice.com
© Telex Communications, Inc. 1/2003
Part Number 38110-200 Rev A
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: [phone]
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
For technical assistance, contact Technical Support at: 866/78AUDIO
Specifications subject to change without notice.
Dimension Drawings:
The loudspeaker shall be a single driver system consisting of one
12-inch (300 mm) low-frequency and frequency-dividing network
installed in a vented, slot-loaded enclosure. The loudspeaker
system shall meet the following performance criteria: Amplifier
Power: 300 watts long-term program using EIA RS-426A pink
noise (6 dB crest factor). Frequency response, 42 Hz–160 Hz (-10
dB from rated sensitivity). The enclosure shall be MDF and
constructed with both glue and steel fasteners. The enclosure shall
be 16.5" (412 mm) high, 23" (584 mm) wide, 12" (305 mm) deep.
The finish shall be a paintable black or white. The grille shall be
acoustically transparent foam. The support bracket shall be low
profile and integral with the enclosure. The cabinet shall be
designed for ceiling mounting with additional accessory materials.
All standard mounting hardware shall be included for wall or corner
placement. The loudspeaker shall be the Electro-Voice ® EVID
model 12.1P.
Top View
Front View Side View
Line
Out
Line
In
Volume
High Pass
Out
(Crossover
Frequency)
Variable
Crossover Limiter