Electrolux Handling System
Slide Conveyors w/splashb. deep basin
Some Electrolux dishwasher models can perform to their full potential, if combined with
the Electrolux Handling System range. The modular system allows to design ergonomic
and reliable solutions to handle, transport and sort kitchenware, obtaining the most
effective flow in the dishwashing room. The wide range contains cord conveyors for trays,
manual, motorized and dishwasher driven sorting tables and a variety of roller, slide and
cord conveyors for baskets.
EASY TO INSTALL
• ±50mm adjustable feet.
• The conveyors are
supplied as knock-down.
• Connection to another
rack conveyor or the
dishwasher is possible on
the left or the right.
• Thick welded flanges for
sturdy connection between
the units.
• Provided with “key holes”
and “snap-on” system for
fast and easy installation.
• "Snap on" system reduces
the number of screws
needed. Easy to assemble
and clean.
• Two legs included as
standard.
• Self bearing undershelf
eliminates the need for
additional frames.
EASY TO USE
• Manual rack movement on
slide rails.
• Designed for 500x500 mm
dishwashing baskets.
• Integrated splash guards
prevents water leakages.
• Stainless steel strainer.
EASY TO CLEAN
• All surfaces are smooth
with polished finish.
• All corners in the bottom
of the basin are rounded.
• Slide rails are bent into the
profile of the conveyor.
• The sloping bottom of the
basin grants a smooth and
rapid drainage.
• Include stainless steel
waste bucket.
EASY TO MAINTAIN
• Basin constructed in AISI
304 1,2 mm stainless steel.
• AISI 304 feet and square
40x40 mm tubular legs.
