Electrolux EK 5147 User manual

cooker
INSTRUCTION BOOK
EK 5147
821 03 88-01/1

Contents
2
Contents
Safety ............................................................ 3
The Cooker ................................................ 4
Unpacking .......................................... 4
The accessories ................................. 4
The safety equipment ............................... 5
Non-tip device ................................... 5
The hob guard (optional accessory) 5
The door catch .................................. 6
Before the first use ................................... 6
Cleaning the cooker .......................... 6
Wash the accessories ....................... 6
Setting the clock ................................ 7
Heat the hotplates ............................ 7
Heat the oven empty ....................... 7
The control panel ...................................... 8
The indicator light bulbs ................... 8
The hob ....................................................... 9
Using the hob .................................... 9
Cleaning the hotplates ....................11
The oven ...................................................12
The functions of the oven ..............12
Buttons for the clock .......................13
The timer .........................................13
Oven time ........................................14
End time ..........................................14
Oven time and end time ................15
Practical use .....................................15
Cleaning and maintenance ............19
Installation .................................................21
To adjust the plinth height .............21
Levelling the cooker ........................21
Electrical connection .......................22
Service .......................................................23
Technical data ..........................................24
Practical tips and advice .........................25
Problems and actions needed ..............26
At the end of the cooker’s life .............26

Safety
3
Safety
Cooker technology is constantly improving. The way you use your new cooker may be different from the way
you used your old one. Please read the whole instruction book before using your new cooker. This cooker is
intended for normal domestic use. Take care of the instruction book which will be needed by the new owner if the
cooker is sold or passed on to someone else. Do not hesitate to contact us with questions or viewpoints about the
cooker and its use.
ANY TEXT MARKED WITH Awarning triangle is to do with safety. PLEASE READ THESE TEXTS CAREFULLY, so that you
do not harm yourself, others or the cooker.
Children and the cooker
Children are naturally curious and interested in most
things, including the cooker. From a safety point of
view, we would like to emphasis the following for
those with children at home:
There should be worktops on both sides of the
cooker extending at least 40 cm to left and to right.
Alternatively the cooker can be installed with a wall or
a tall kitchen unit on one side and a worktop on the
other side. The NON-TIP DEVICE should be fitted to pre-
vent the cooker from tipping forwards if subjected to
an abnormal loading.
The HOB GUARD (included or optional) should be
fitted and the DOOR CATCH/DOOR CATCHES should be
activated.
Children should be allowed to help with cooking,
but teach them that pans, hotplates and ovens become
hot and retain their heat for some time after use.
TOUCHING THESE CAN CAUSE BURNS.
Installation
Work on the cooker must be carried out by a qualified
electrician. Work performed by unqualified persons
can damage the cooker, and may also lead to personal
injury and/or damage to property.
The cooker is heavy. Certain edges and corners
which will not normally be exposed may be sharp. Use
gloves when moving the cooker.
The NON-TIP DEVICE should be fitted, to prevent the
cooker from tipping if subjected to an abnormal
loading.
When using the cooker
Never leave the cooker unattended while deep frying,
or when using it for melting fats, paraffin wax or other
flammable substances. In the event of a fire, turn off
all the controls and turn off the cooker hood fan.
SMOTHER THE FIRE WITH APAN LID, never use water.
On the hob, use only pans which are intended for
use on hotplates. Use only ovenproof dishes and con-
tainers in the oven.
Check that the cooker is switched off when not in
use. All controls should be turned off.
Cleaning
Keep the ceramic hob and oven clean. Fat and spill-
ages give off smoke and odours when heated, and, at
worst, can cause fires.
Maintenance and service
Turn all controls off before changing any bulbs.
Service and repairs should be carried out by a
service company approved by the supplier. Use only
spare parts supplied by such companies.
At the end of the cooker’s life
Help prevent accidents when the cooker has reached
the end of its useful life. Make sure first that the lead is
completely disconnected from the electrical supply
(pull out the plug, or have the cooker safely discon-
nected from the wall), then cut the electrical lead at the
point where it enters the cooker. Make sure that the
door catch/door catches have been deactivated.

The Cooker
4
The Cooker
1Removable oven vent
2Hob with HOTPLATES
3Control panel with controls,
buttons and an information
window
4Oven
5Storage drawer
6Plinth
To make it easier to clean behind
the cooker, it has wheels at the rear.
To move the cooker forwards, open
the oven door, lift carefully holding
the upper edge and then pull the
cooker out from the wall.
1
2
3
4
5
6
Unpacking
Check that the cooker is undamaged and in perfect
condition. Any damage occurred during transportation
should be reported to the retailer immediately.
The packaging materials can be recycled. Contact
your local council to find out where to take them.
The accessories
THE FOLLOWING ACCESSORIES ARE SUPPLIED WITH THE
COOKER:
• Enamelled baking trays and oven dish
• Oven shelf
• Non-tip device, including fittings
• Roasting sensor
• Instruction book
THE FOLLOWING MAY BE PURCHASED AS OPTIONAL
ACCESSORIES:
• Hob guard, including fittings

The safety equipment
5
The safety equipment
There should be at least 40 cm of worktops on both sides
of the cooker (SEE PICTURE). Alternatively the cooker can be
installed with a wall or a tall kitchen unit on one side and
a worktop on the other.
Child safety is further improved if the following
equipment is fitted/in use:
Non-tip device
The non-tip device should be fitted, to prevent the
cooker from tipping if subjected to an abnormal
loading. The non-tip device can only provide pro-
tection when the cooker is pushed into its normal
position.
Before fitting the non-tip device, make sure the cooker has
been levelled and adjusted to the correct plinth height (see
“Installation” on p. 21).
1Draw a line on the wall – after levelling the
cooker – along the top edge of the hob (see illus-
tration).
2The measurements shown can be applied
whether the non-tip device is fitted on the left or
the right (see illustration). Measure and mark
where the non-tip device is to be placed, then
screw it onto a solid material or a suitable rein-
forcement or fixings.
NOTE! If the space between kitchen units is wider than
the cooker, you will need to alter the measurements
shown in the illustration if the cooker is to be centred.
3If you alter the measurements, remember to
align the cooker correctly when pushing it into
place, so that the non-tip device enters the hole
on the cooker rear.
The hob guard (optional accessory)
The hob guard should be fitted to make it harder
for children to reach pans on the hob.
1Press the plugs into the front holes.
2Place the guard on the cooker with the plugs over the
edge of the hob.
3Angle the guard downwards and then back upwards
so the edges on its two sides engage under the edge
of the hob.
4Lock it in place with the rear plugs.
min. 40 cm min. 40 cm
55-60 mm
35-65 mm
2
3
1
4
5

The safety equipment
6
The door catch
The door catch makes it harder for children to open the
oven door/storage drawer. The catches are already
activated when the cooker is supplied new, but can be
deactivated if necessary.
TO DEACTIVATE THE DOOR CATCH, DO AS FOLLOWS:
ATo open the door, lift the lever at the same time as
pulling the door towards you.
BWhen you want to deactivate the catch, open the
door (make sure the oven is not hot).
1Press down the catch on the inner top edge of the
door at the same time as you
2press down the lever on the front of the door and
3push it inwards.
CTo activate the door catch, pull the lever on the front
of the door outwards.
Before the first use
Cleaning the cooker
Clean the cooker with a clean cloth, hot water and a
little washing-up liquid straight after use. NEVER USE
ABRASIVE CLEANERS OR SCOURING AGENTS, except on some
parts of the cooker that might occasionally need
cleaning more thoroughly. Don’t forget to clean
underneath the oven vent cover. This can be washed
in a dishwasher.
Remember that the non-tip device does not work
when the cooker has been pulled forward to clean
behind it.
Wash the accessories
Wash the baking tray, oven dish etc. in hot water and
washing-up liquid. Rinse and dry.
A
B
C
3
1
2

The safety equipment
7
Setting the clock
Once the cooker is connected to the power supply,
some symbols will start flashing until you have set the
time on the clock.
HOW TO SET THE CLOCK:
1The symbol Aand 0:00 will be flashing in the
information window.
2Press the and , buttons at the same time,
release the button first, then the button,
and set the right time using or . The time
is set in minutes. The Asymbol in the window
disappears.
Heat the hotplates
When supplied, the hotplates have been pretreated
with an anti-corrosion product which will provide bet-
ter protection if the hotplates are heated without pans
the first time.
Heat one hotplate at a time on full power for no
more than five minutes. The hotplates will get very
hot, so be extra mindful of the safety of anyone near
the cooker during this procedure. Some smoke and
fumes are to be expected as the remaining solvent
evaporates. Finish heating the hotplates before you
first heat the oven.
Heat the oven empty
Children should be supervised!
The cooker will get very hot.
Before you use the oven for the first time, you need to
heat it empty. Follow these instructions:
1Select (top/bottom heat) and maximum tem-
perature. The oven door should be shut.
2Ventilate the room. Switch off the oven once the
“new” smell and fumes have ceased.
3Use hot water and washing-up liquid to wipe the
oven, side racks and the inside of the door. Then
wipe all of these parts dry.
A
max. 5 min.
max.°C

The safety equipment
8
The control panel
1a HOB indicator lights
1b OVEN indicator lights
2OVEN function control
3OVEN temperature control
4HOTPLATE controls
5a Information window
5b Buttons for THE CLOCK
The indicator light bulbs
These are neon indicator lights, which normally have
a long service life. If one should fail, contact your
service centre.
1b 5a
5b23 4
1a

The hob
9
The hob
The cooker has four hotplates. Fast-heating hotplates are
marked with a red dot and have an overheating cut-out
function.
Using the hob
Never leave the cooker unattended while deep
frying, or when using it for melting fats, paraffin
wax or other flammable substances. In the event
of a fire, turn off all the controls and turn off the
cooker hood fan. SMOTHER THE FIRE WITH APAN
LID, never use water.
The front left hotplate and the back right hotplate are
graduated from 0 to 12. The front right and back left
hotplates have fixed settings, 0-6 (6 is the hottest).
They can all be turned both clockwise and anticlock-
wise.
The control setting you choose will depend on your
pans, what you are cooking and the quantity. You will
soon learn to select the correct control setting. When a
hotplate is switched on, the cooker’s red indicator light
comes on.
Boiling
You normally start cooking with the hotplate switched
to maximum heat before turning it down to a lower
heat. The sound and size of the water bubbles can help
you to choose the correct setting:
GENTLE HEAT: Simmering with tiny bubbles as in carbonated
water. Suitable for cooking rice, fish and vegetables such as
sugar peas and broccoli.
MEDIUM HEAT: Gently boiling with larger bubbles.
Suitable for boiling most foods, such as meat,
root vegetables and potatoes.
HOT: The sound disappears before the water starts
bubbling vigorously. Suitable for boiling water for
pasta and rice. Then turn the heat down for more
gentle cooking.
ø 180 mm
ø 145 mm
ø 145 mm
ø 180 mm

The hob
10
Frying
It is best when frying not to use food that has come
straight out of the refrigerator. Only about 2/3 of the
bottom of the pan should be covered by food.
Put the margarine or butter in the frying pan and
turn on to the recommended heat. In order to get the
best results, it is important that the fat is the right
colour (temperature) when you start frying. Hold a
light-coloured spatula to the bottom of the pan to see
the colour of the fat.
LIGHTLY BROWNED FAT: Suitable for eggs, onions, raw
potatoes, chops and steaks and whole fish, etc.
BROWNED FAT: Suitable for frying most foods such as
pancakes, minced meats, sausages, thin fish fillets and
stewing steak.
WELL BROWNED FAT: Suitable for thin steaks. Be careful
as the fat can easily become burnt.
Choosing suitable pans
To help you save both time and energy, the bases of
saucepans and frying pans should:
• be at least as large as the hotplate. If the base is
smaller than the hotplate, any spillages are quite
likely to burn onto the hob.
• be flat. It takes longer to heat a pan with a base
which curves in or outwards too much.
When you are buying new pans, it is advisable to
choose stainless steel ones with sandwich-type bases
(i.e. layers of different metals).
Save energy!
• Putting a lid on pans cuts the amount of energy
used by half (compared to cooking without lids).
• Using pans with flat bases saves 25% energy
(compared to uneven based pans).
• Make sure the hob is clean and dry. Dirt and
moisture reduce heat transfer between pans and
hotplates.
• Turn the hotplates off and finish cooking using
the remaining heat.
• Save energy by steaming and pressure-cooking.

The hob
11
Cleaning the hotplates
Remove spillages as soon as possible, to prevent them
from burning onto the hotplate. Soilage impairs the
transfer of heat to the pan.
Cleaning and anti-corrosion treatment
1Clean the hotplates thoroughly with soapimpreg-
nated steel-wool. Wash off all traces of soap, and
dry using paper towels.
2When the hotplates are cold and dry, apply an even
layer of the anti-corrosion product to each. This
product is available from Electrolux dealers.
3The product now needs to be heated on the hot-
plates. Heat one hotplate at a time on full power for
no more than five minutes. Some smoke and fumes
are to be expected as the remaining solvent evapo-
rates.
4Use white spirit to remove any traces of the product
on your hands or (after the cooker has cooled) on
the cooker enamel.
max. 5 min.

The oven
12
The oven
The oven has removable side racks for the shelves (1)
with three rungs on each side.
The roasting sensor socket is on the right-hand inside
of the oven (2) and the fan with ring element is on the
back wall of the oven (3).
The functions of the oven
For all oven functions, the indicator light comes on
when the oven is heating and goes out when the set
temperature is reached (goes on and off as the thermo-
stat switches in and out). To choose an oven function,
turn the function control clockwise to the symbol for
the desired function (see below).
THE OVEN FUNCTIONS ARE:
Oven light
The oven light comes on automatically for all settings.
You can also have just the light on without any of the
other functions being turned on.
Top/bottom heat
Using both top and bottom elements.
Fan-assisted oven
Using fan plus an element around the fan.
Pizza/Quiche position
Using fan, ring and bottom element.
Tu r b o g r i l l
Using the grill element and fan.
Top element
Using the element at the top of the oven.
Bottom element
Using the element at the bottom of the oven.
Grill
Using the grilling element.
Swift start (browning)
Using the grilling and bottom element. It takes approx.
seven minutes to heat the oven to 200ºC. Can also be
used for “au gratin” dishes.
1
2
3

The oven
13
THE PRINCIPLE FOR FAN-ASSISTED OVEN
Top and bottom elements and a ring element around the
fan heat the air which then spreads through the air ducts
in the back wall of the oven. The hot air circulates in the
oven before being drawn back in through the fan grill.
The heat is transferred quickly and effectively, and
often means you can use a lower temperature than with
top/bottom heat. The temperature can be lowered by 15-
20% if the recipe specifies a temperature between 160ºC
and 225ºC. The higher the temperature, the more it can
be lowered. It is better to use top/bottom heat for tem-
peratures over 225ºC.
Buttons for the clock
SYMBOLS FOR THE BUTTONS:
PLUS for time or temperature
MINUS for time and temperature
Timer
Oven time
End time
SYMBOLS IN THE INFORMATION WINDOW:
A Auto-symbol
Pan symbol
Timer symbol
The timer
The timer can be set for any time from 1 minute up to 23
hours and 59 minutes.
1Press . The time 0:00 appears. If you do
not set the time within five seconds, it will go over
to ‘normal time’. Press again in that case.
2Set the time by pressing or . The symbol
now appears in the window.
3At the end of the set time, a buzzer is heard and
the symbol in the window disappears. Press
either button or to turn the buzzer off.
To change the set time or to reset the time, press or
. After about five seconds, the time setting for the
timer switches over to the clock. To see how much time
is left on the timer, press .
ALTERING THE TIMER SOUND
There are three different sounds/levels for the timer. To
change the sound, press until you find the one you
want to use.
A

The oven
14
Oven time
Use this function to set the length of time you want the
food to be in the oven. The oven turns off after the set
time.
TO SET THE OVEN TIME:
1Switch the oven on by turning the function
control and the thermostat control to the
required positions.
2Press and set the time using or . The
symbols A and now appear in the informa-
tion window.
3The oven comes on at once.
4When the set oven time has been reached, the
symbol A flashes, the symbol goes out and a
sound is emitted. Press the buttons at the same
time and to turn off the sound.
5RESET THE CONTROLS.
After about five seconds, the time setting for the oven
time switches over to the clock. To see how much time
is left, press .
End time
To set the end-time for when you want the oven to turn
off. This function is useful if you:
• have to leave the kitchen and do not wish to
spoil the cooking/baking.
• want to use the heat after turning off, thereby
saving energy.
Put the food in the oven and when you have set the end
time, switch on the oven.
TO SET THE END TIME:
1Switch the oven on by turning the function
control and the thermostat control to the
required positions.
2Press and set the required end time using
and . The symbols Aand now appear
in the information window.
3The oven comes on at once.
4When the set end time has been reached, the
symbol Aflashes, the symbol goes out and a
sound is emitted. Press the buttons at the same
time and to turn off the sound.
5RESET THE CONTROLS.
E.G.: The time is 13.00. You want the food to be ready
at 13.45 (which is the set end time).
Cooking time is therefore 45 minutes.
A
A

The oven
15
Oven time and end time
Would you like dinner to be ready when you get
home? Put the food in the oven and set the END TIME
plus the length of time the oven needs to be on, i.e. the
OVEN TIME. Maximum oven time is 10 hours.
TO DO THIS:
1 Place the food to be cooked into the oven and
switch the oven on by turning the function
control and the thermostat control to the
required positions.
2Press and set the required cooking time (e.g.
45 minutes) using and . The symbol A
appears in the information window.
3Press to set the required end time.
The earliest end time appears in the window.
4Choose the end time using and . The
symbol has now gone out and comes on
again when the oven starts.
5At the end of the cooking time, the power sup-
ply to the oven cuts out. The symbol Aflashes,
the symbol goes out and a sound is emitted.
Press the buttons at the same time and
to turn off the sound.
6RESET THE CONTROLS.
To discontinue programming
If you need to stop programming for some reason,
you do this by pressing at the same time and .
REMEMBER TO switch the oven off if you discontinue
programming.
Practical use
Never place aluminium foil, baking trays or oven
dishes directly on the bottom of the oven. Block-
ing heat from the bottom of the oven can damage
the enamel through overheating. The oven gets
hot when in use: CHILDREN NEARBY MUST BE
SUPERVISED.
The baking tray may warp temporarily due to tempera-
ture fluctuations, or if the food, (pizza, etc.) is
unevenly distributed on its surface. The tray resumes
its shape when cool.
A
A

The oven
16
See below for practical advice on how to efficiently
use the oven functions for various ways of cooking:
Baking
Use a skewer to check whether sponge cakes are ready
when there are about 5 minutes left. You can then
shorten or lengthen the baking time. The material,
colour, shape and size of the baking tins as well as the
recipe can affect results. TOP/BOTTOM HEAT gives an
even colour.
Fan-assisted baking
The FAN-ASSISTED OVEN reduces the total baking time as
two trays can be in the oven at the same time. However,
the bread or buns may not brown evenly particularly if
the dough had not risen well.
Didn-t you get quite the result you expected? In
“Practical tips & advice” on p. XX, we give you a few
tips on solutions to your baking problems.
Cooking
TOP/BOTTOM HEAT is normally best when using an oven
shelf.
Fan-assisted cooking
Use the FAN-ASSISTED OVEN when cooking on several
shelves at the same time, e.g. meatloaf, meatballs and
complete meals (starter, main dish and dessert).
Remember to choose dishes that need the same tem-
perature. Dishes that need different amounts of time in
the oven will have to be put in according to when you
want them to be ready.
Roasting
Using the TOP/BOTTOM HEAT and FAN-ASSISTED OVEN
for roasting is both easy and practical. Joints of beef
such as topside and sirloin retain their natural juices
best if roasted at 125ºC. However, cooking time is
slightly longer than at a higher temperature. Use a meat
dish in which there is just sufficient room for the joint
so that the juices do not burn dry. Use a large roasting
pan or ovenproof dish when roasting a joint of ham as
there is usually a lot of meat juice. Be careful when
removing it from the oven. If you are using a roasting
bag, cut a hole in one corner before putting it in the
oven. That way you are less likely to burn yourself on
hot steam when you open the bag.

The oven
17
Using the roasting sensor
Be careful that you do not burn yourself on the
heating element in the top of the oven or on the
oven rungs when inserting or removing the
roasting sensor plug. Use an oven glove.
The sensor works within the temperature range of 0 to
99°C. Before you switch on the oven, remove the
cover which prevents the sensor socket from becoming
dirty. Only use the sensor supplied with your oven and
make sure that no part of the sensor comes into contact
with the inside top of the oven.
In order to achieve best results, the roasting sensor
should be inserted so that its tip comes to the thickest
part of the meat, where the heat takes longest to reach.
The entire sensor should preferably be inside the meat,
because hot air in the oven can affect its reading if the
shaft is exposed. If the sensor is inserted into fat or
touches bone, it can give an unreliable reading.
Preheat the oven first, then put the joint of meat in
the lower part of the oven. Remove the joint when the
sensor shows the required temperature. Cover the meat
with aluminium foil and let it stand for about 15
minutes. This will make it easier to carve and less meat
juices will be lost when carving.
SETTING
To use the roasting sensor:
1Connect the sensor to the socket in the oven.
2The pre-set temperature is 80ºC. You can now
alter the temperature using the buttons and
. The current temperature and the tempera-
ture you have chosen are shown in the informa-
tion window (SEE ILLUSTRATION). You can see the
rising temperature of the meat in the information
window.
TURNING OFF
When the correct meat temperature has been reached, a
sound is emitted and the oven switches off.
1Press the buttons at the same time and to
turn off the sound.
2Remove the sensor from the socket in the oven
and remove the meat. NOTE!Both the oven and
the sensor are hot.
3When the oven has cooled down, replace the
protective socket cover.
It will only be possible to use the oven again when the
sensor has been removed. NOTE! REMEMBER TO RESET THE
CONTROLS!
Actual temperature Desired temperature

The oven
18
Grilling
Size, shape, quantity, the degree of fat marbling, and
even the initial temperature of the meat all affect the
outcome and time of the grilling process. Fish, poultry,
veal and pork will not brown as much as the darker
meats such as beef and game. Vegetable oil and/or sea-
soning will improve the colour, but it also increases the
risk of surface burning.
For best results, avoid grilling food straight from
the refrigerator. Dry the surface of the meat, place it on
the oven shelf and season to taste. Place an oven dish,
ideally lined with foil, underneath the shelf to catch the
fat etc. which runs off. Pork chops, steaks and fish
should be grilled high up in the oven, while meats such
as thick spare ribs are better lower down.
Set the function control to and the temperature
control to the temperature require (250ºC maximum).
Preheat the grill for 3 to 5 minutes. Keep an eye on the
food, and turn it at least once. Grilling for too long
makes food dry, dull, and possibly burnt as well. The
oven door should be closed when grilling.
Tu r b o g r i l l
The turbo grill cooks food faster and browns it more
evenly than the grill. The grill element browns the
food and the fan circulates the hot air. Perfect for ‘tall’
dishes such as grilling ham to give it an even, all-round
colour.
Pizza/Quiche position
Perfect for cooking a pizza. Heat the oven to 225ºC
and place the pizza on the middle shelf. Use a baking
tray, not a roasting dish, to prevent the edges of the
pizza from burning.
Browning (swift start)
Excellent for browning au gratin dishes, toasted sand-
wiches, etc. You can also use this function to heat the
oven quickly to the set temperature. When the oven
has reached that temperature, you can then select
whichever function is required. It takes about 8 min-
utes to reach 200ºC. However, do not use this method
of rapid heating when baking biscuits or meringues.

The oven
19
Defrosting
Set the function control to . When thawing frozen
meat, fish, glazed, iced or filled bakery products, the
temperature control should be off.
Oven shelves/baking trays can be placed on several
shelf positions if you have a large quantity of food to
defrost. The times required cannot be given here. Test
using a skewer.
Cleaning and maintenance
The oven
The oven surfaces are of vitreous enamel. The outer
section, the door front, can easily be removed for
cleaning (see “The oven door” below).
IF THE OVEN IS VERY SOILED:
1Use a spatula or similar implement to remove
spillages which have hardened.
2Use a sponge to spread soft soap inside the oven.
3Close the door. Set the oven to (top/bottom
heat) and 100°C for about 10 minutes.
4When the oven has cooled, wash the surfaces with
clean water. Rub gently with a soapimpregnated
steelwool pad on stubborn patches. Wipe the sur-
faces dry.
The oven door
The oven door consists of two sections with heat-
reflecting glass for a lower surface temperature. Do
not scratch the class when cleaning, it has a heat-
reflecting layer on the inside.
TO CLEAN BETWEEN THE TWO PANES:
1Check that the oven is not hot, then slide the storage
drawer open.
2Open the door and insert (for example) rolled-up
oven cloths between the hinges (SEE PICTURE). These
are to prevent the door from closing.
3Hold the inner section of the door down (to prevent
it from springing up when released), then use a coin
or suitable screwdriver to undo the two screws (SEE
PICTURE).
4Carefully raise the inner section of the door and
clean the panes (use a product for window-clean-
ing). If the glass is very soiled, use the scraper sup-
plied with the cooker.
5When you have finished cleaning, hold the inner
section of the door in its original position, refit and
tighten the screws, and remove the oven cloths.
2
2
1
4
3

The oven
20
To change the oven light bulb
1Turn all controls to off and check that the oven
is not hot.
2Unscrew the glass cover (see illustration).
3Unscrew the old bulb.
4Fit a new bulb, marked 230–240 V, 15 W and
300°C, with an E14 screw fitting.
5Refit the glass cover.
The fan
You can remove the fan blades for cleaning, but do so
with care, as they have sharp edges.
1Make sure the oven is turned off and is cold.
2Unscrew the four screws (A) and remove the
back wall of the oven.
3Take hold of the fan impeller carefully and undo
the nut (B), by turning it clockwise with a small
adjustable spanner.
4Clean the fan blades in hot soapy water.
5Refit all the parts. Make sure all the screws are
securely in place.
The oven accessories
Release each side rack for the oven shelves at the bot-
tom corners (1), lift it sideways and upwards and
remove from the oven (2). Wash the racks and shelves
by hand or in a dishwasher. If very soiled, soak them
first, before cleaning with a steelwool pad.
The baking trays and oven dish should be wiped
clean with paper towels, or washed by hand when
necessary. Any burnt-on food can be removed using a
suitable spatula.
Storage drawer
1Empty the drawer and pull it out as far as possible.
2Hold the handle and lift upwards gently. This
frees the drawer from the catch at the back.
3Pull the drawer out completely and lift it out.
After cleaning, place the drawer wheels on the brack-
ets (SEE PICTURE). Lift the drawer slightly as you first
push it in so as to prevent the wheels from fastening in
the front catch.
B
AB A
2
1