Electrolux Electric Pasta Cookers 700XP User manual

700XP
Gas Tilting Braising Pans
The 700XP range is comprised of over 100 models designed to guarantee the highest level of performance,
reliability, energy saving, safety standards and ergonomic operation. These concepts are reflected throughout
the line in its modularity, construction and numerous configurations: countertop (on base or table),
free-standing, on concrete or stainless steel socle, bridged or cantilever. Thanks to its advance technology and
premium performance, 700XP is a perfect solution for institutions of small sizes with limited footprint as well as
restaurants needing to obtain the most from the kitchen space. The models detailed in this sheet are
freestanding gas tilting bratt/braising pans.
EASY TO INSTALL
• Main connections are
accessible from below the base of
the unit.
EASY TO CLEAN
• All models have right-angled
side edges to allow flush-fitting
joints between units, eliminating
gaps and possible dirt traps.
• Well and double-skinned lid in
stainless steel. Exterior panels in
stainless steel with Scotch Brite
finish.
• The stainless steel well features
rounded corners and has a
seamless weld joining the bottom
plate from the rest of the well for
fast, safe and easy cleaning.
• Feet in stainless steel are
adjustable up to 50mm in height.
EASY TO USE
• Burners with optimized
combustion, flame failure device
and piezo ignition with electronic
flame control.
• Working temperature from 90°C
to 290°C controlled through a
thermostat.
• Choice of well cooking surface in
mild steel or Duomat (a 10
mm-thick alloy obtained by
combining two different stainless
steels to improve the thermal
stability of the cooking surface,
thus allowing for a more
multifunctional use of the bratt
pan - dry and wet cooking can be
performed alternatively - and
ensuring a higher resistance to
corrosion.).
• Cooking surface in mild steel
ideal for sautéing, poaching,
steaming, boiling, stewing and
regular frying. Braising pans with
a mild steel cooking surface are
typically indicated for "dry
cooking" or "shallow frying".
• High- precision manual tilting
system to facilitate the emptying
of the contents in the well.
• All gas appliances are supplied
for use with natural gas or LPG.
Conversion jets supplied as
standard.
EASY TO MAINTAIN
• The special design of the control
knobs and bezels guarantees
against water infiltration.
• IPX4 water protection.

700XP
Gas Tilting Braising Pans
Internet: http://www.electrolux.com/foodservice
CHNA0102013-10-03Subject to change without notice
REAR PANELING 800MM 206374 206374
REAR PANELING 1200MM 206376 206376
REAR PANELING 1000MM 206375 206375
PRESSURE REGULATOR FOR GAS UNITS 927225 927225
MATCHING RING FOR FLUE CONDENSER 150DIAM 206133 206133
FRONTAL KICKING STRIP 800 MM 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150
FLUE CONDENSER FOR 1 MODULE DIAM.150MM 206246 206246
FLANGED FEET KIT 206136 206136
DRAUGHT DIVERTER WITH 150 MM DIAMETER 206132 206132
BASE SUPPORT FOR FEET/WHEELS 800MM 206367
BASE SUPPORT FOR FEET/WHEELS 400MM 206366
BASE SUPPORT FOR FEET/WHEELS 1600MM 206369
BASE SUPPORT FOR FEET/WHEELS 1200MM 206368
4 FEET FOR CONCRETE INSTALLATION 206210 206210
2 SIDE KICKING STRIPS-CONCRETE INST-700 206265 206265
2 SIDE KICKING STRIPS - 700 LINE 206249 206249
ACCESSORIES
Net weight - kg. 105 105
gas 16 16
Power - kW
Working temperature - min/max - °C 90, 290 90, 290
depth 410 410
width 680 680
Cooking surface dimensions - mm
Maximum Well Capacity -lt 60 60
Thermostatic valve ● ●
material Mild Steel Duomat
Cooking surface
height 200 200
depth 580 580
width 770 770
Usable well dimensions - mm
height adjustment 50 50
height 850 850
depth 730 730
width 800 800
External dimensions - mm
Type of gas burner control Termocople safety
valve; Thermostatic
valve
Termocople safety
valve; Thermostatic
valve
Power supply Gas Gas/Electric
TECHNICAL DATA
E7BRGHMNF0
371180
E7BRGHDNF0
371181
EASY ON THE ENVIRONMENT
• 98% recyclable by weight.
• CFC free packaging.

700XP
Gas Tilting Braising Pans
Internet: http://www.electrolux.com/foodservice
CHNA0102013-10-03Subject to change without notice
G - Gas connection 1/2" 1/2"
CWI - Cold water inlet 3/4" 3/4"
LEGEND
E7BRGHMNF0
371180
E7BRGHDNF0
371181
371180, 371181