Electrolux Zanussi Professional NGG400 User manual

ZANUSSI
P R O F E S S I O N A L
GAS GRILLS
N 900
Model 200242
Net weight - kg. 60 94 60 94
gas 11 22 11 22
Power - kW
height adjustment 50 50 50 50
height 850 850 850 850
depth 900 900 900 900
width 400 800 400 800
External dimensions - mm
Power supply Gas Gas Gas Gas
NGG400
200241
NGG800
200242
NGG400T
200249
NGG800T
200250
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer.
The models detailed on this sheet are 4 gas
grills in half and full module ideal for grilling
fish and meats.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Stainless steel burners with self-stabilizing
flame. Each burner has 3 branches and the
gas holes are protected by the radiant
elements to prevent fats dripping onto them.
� Each ½ module has a separate control for
the burner with a flame failure device.
� Worktop in 20/10, 304 AISI stainless steel.
Front and side panels in 304 AISI stainless
steel with Scotch Brite finish.
� All models have right-angled side edges to
allow flush fitting joins between units,
eliminating gaps and possible dirt traps.
� Cast-iron grids with draining channel for
fat and stainless steel splashguard on three
sides.
� The grids are suitable on two sides: the
first side, sloped with drainage channels, can
be dedicated to very fatty meats and the
second side, flat, can be used to cook fish,
vegetables or hamburgers.
� Large pull-out excess fat container. The
use of water in those containers permits the
fast lowering of the fats temperature thus
guaranteeing a genuine cooking; Moreover
the evaporation of the water permits to
maintain the foods delicate.
� The special design of the control knob
system guarantees against water infiltration
� Main connections can be via the base of
the unit.
� All models provided with service duct to
facilitate installation.
� All gas appliances are supplied for use
with natural gas, with LPG conversion jets
supplied as standard.
� Models NGG400T and NGG800T are
town gas versions.
� All models can be installed on cantilever
system.
� IPX5 water protection.
Productivity (full module)
� 336 hamburger fresh 100 gr
� 240 Pilard of veal 80 gr
� 420 Sliced zucchini 1/2 cm
� 168 Pork ribs 160 gr
� 360 Sliced turkey 100 gr
� 108 Sliced salmon 200 gr
� 60 Angler 500 gr
� 12 Turbot 1 kg

BACL1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WATER FILLING TAP-GAS/EL FS GRILLS-800MM 206281
WATER FILLING TAP-GAS/EL FS GRILLS-400MM 206280
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138 206138 206138
STAINLESS STEEL GRID FOR GRILLS 206285 206285 206285 206285
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165 206165 206165
SCRAPER FOR BARBECUE GRILLS 206299 206299 206299 206299
S/S GRID+DRAINAGE CHANNELS FOR GRILLS 206286 206286 206286 206286
PRESSURE REGULATOR FOR GAS UNITS 927225 927225 927225 927225
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234 206234 206234
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185 206185 206185
KIT 4 FEET GRILL/BRATT PAN-CONCRETE INST 206163 206163
JUNCTION SEALING KIT 206086 206086 206086 206086
FRONTAL PANEL FOR 800 MM GRILL 206198 206198
FRONTAL PANEL FOR 400 MM GRILL 206197 206197
FRONTAL KICKING STRIP 800 MM 206176 206176 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150 206150 206150
FLANGED FEET KIT 206136
CHIMNEY UPSTAND 800MM 206304 206304
CHIMNEY UPSTAND 400MM 206303 206303
2 SIDE PANELS FOR GRILL / BRATT PAN 206207 206207 206207 206207
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157 206157 206157
2 SIDE KICKING STRIPS 206180 206180 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278 206278 206278
2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181 206181 206181
2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202 206202 206202
NGG400
200241
NGG800
200242
NGG400T
200249
NGG800T
200250
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
H - Gas connection 3/4" 3/4" 3/4" 3/4"
NGG400
200241
NGG800
200242
NGG400T
200249
NGG800T
200250
LEGEND
200241, 200250, 200249, 200242
L=
53
585
H
H
500400
900
900
L= 800 mm MODEL *G/G2
L= 400 mm MODEL *G/G1
597813100