Electrolux E:Line ERCE9020AS User manual

installation
and user manual
e:line canopy rangehoods
ERCM9010AS
ERCE9020AS
ERCG9030AS

Congratulations
electrolux e:line rangehoods contents 1
Congratulations and thank you for choosing our E:Line
canopy rangehood. We are sure you will find your new
rangehood a pleasure to use. Before you use your
rangehood, we recommend that you read through the
whole user manual, which provides the description of the
rangehood and its function.
To avoid the risks that are always present when you use
an electrical appliance it is important that the canopy
rangehood is installed correctly and that you read the
safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for
future reference and pass it on to any future owners. After
unpacking the canopy rangehood please check it is not
damaged. If in doubt, do not use the appliance but contact
your local Electrolux Service Centre.
Contents
• Product description 2
• Important safety instructions 3
• Dimensions 4
• Installation 5
• Using the rangehood 6
• Maintenance and cleaning 8
• Changing the halogen lamps 8
• Optional ducting accessories 9
• Warranty 10
Information on disposal for users
•Mostofthepackingmaterialsarerecyclable.Please
dispose of those materials through your local
recycling depot or by placing them in appropriate
collection containers.
•Ifyouwishtodiscardthisproduct,pleasecontactyour
local authorities and ask for the correct method of disposal.

electrolux e:line rangehoods product description 2
Productdescription
Component list
1. Exhaust cover ceiling mounting bracket
2. Telescopic exhaust cover set
3. Flexible exhaust pipe
4. Exhaust duct transition
5. Mainbodymountingbrackets
6. Mainbodyandfanhousingassembly
7. Grease filters
Additional items required for installation
•Fixingsrequiredtoattachmainbodymountingbrackets
and anti tilt fixings.
•Fixingsrequiredtoattachexhaustcovermounting
brackets to the ceiling.
Technical specification
ModelERCG9030AS
Powersupply:220-240volts50Hz.
Connectsto7.5AGPO.
Lights:2x20watt12volthalogen.
ModelERCE9020AS
Powersupply:220-240volts50Hz.
Connectsto7.5AGPO.
Lights:2x20watt12volthalogen.
ModelERCM9010AS
Powersupply:220-240volts50Hz.
Connectsto7.5AGPO.
Lights:2x20watt12volthalogen.
7
ERCG9030AS
1
2
3
4
5
6
ERCE9020AS ERCM9010AS

electrolux e:line rangehoods important safety instructions 3
Important safety instructions
This manual explains the proper use of your new E:Line
canopyrangehood.Pleasereadthismanualcarefully
before using the product. This manual should be kept in
a safe place for handy reference.
This canopy rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
andNewZealandStandardAS/NZS60335.2.31.
This symbol indicates the possibility of injury or
damage to property
Meaningsofsymbolsusedinthismanualareshownbelow:
This symbol indicates never to do this
This symbol indicates always do this
Read the following carefully to avoid an electric
shock or fire.
Young children should be supervised to ensure they do not
play with the canopy rangehood.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the
appliance by a person responsible for their safety.
Ensure the canopy rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric shock.
Never carry out flambé cooking under the canopy rangehood.
This canopy rangehood is not recommended for barbecues.
This canopy rangehood cannot be installed for external use.
Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not
be discharged into any heating flue, which may carry
combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for the purpose.
There must be adequate ventilation of the room when the
canopy rangehood is used at the same time as appliances
burning gas or other fuels.
Always cover lit gas burners with pots or pans when canopy
rangehood is in use.
Always switch off gas burners before you remove pots or pans.
Do not leave lit gas burners exposed due to the risk of fire.
(Fig. 2)
Fig. 1
Fig. 2

electrolux e:line rangehoodsdimensions/electricalconnection4
Dimensions
Canopy dimensions
NOTE: *The fan housing exhaust outlet is 163mm in diameter. Use
duct transition or flexible pipe supplied with the canopy rangehood
as a reducer if using 150mm optional ducting accessories.
(See page 9 for optional ducting accessories).
ERCM9010AS
ERCE9020AS
ERCG9030AS
• Checkthatthemainsvoltagematcheswiththevoltage
on the data plate inside the canopy rangehood.
• Checkthattheinstallationcomplieswithstandardsof
local gas and electricity authorities.
• Ifthesupplycordisdamaged,itmustbereplacedby
the manufacturer or its service agent of similarly qualified
person in order to avoid a hazard.
Safety warnings – For the installer
When installing the cooker hood, make sure you adhere
to the minimum and maximum distances from the cooker
hoodbasetothehobsurface(aspertableonrightpage5).
Exhaust duct installation:
The following rules must be strictly followed to obtain
optimal air extraction.
• Keepexhaustductshortandstraight
• Donotreducethesizeorrestrictexhaustduct.
• Keepbendsintheexhaustducttoaminimum.
• Whenusingexibleductalwaysinstallductwith
helix pulled taut to minimise pressure loss.
• Failuretoobservethesebasicinstructionswill
drastically reduce the performance and increase the
noise levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity, unless
the cavity is designed for that purpose.
The exhaust from the cooker hood must not be discharged
into any heating flue, which may carry combustion products
from other sources.
Electrical connection

Rangehood installation
electrolux e:line rangehoods rangehoodinstallation/installationsequence5
Installation sequence
1. Using a spirit level mark a vertical centre line on the wall
where the hood is to be positioned, and a horizontal line
at the hood base position (refer diagram bottom left).
NOTE: The height of the underside of the hood body must be a
minimum of 600mm above an electric cooktop & 650mm above a
gas cook top and a maximum height of 800mm (see table right).
Distance from hood base to top of hob
hob type minimum* maximum
gas 650mm 800mm
electric 600mm 800mm
* If the instructions of the hob specify a greater distance than the
minimum above, then that shall be the minimum height for installation
2. Markthelocationforthewallandceilingbracketxing
points above the hood base using the hood base as the
reference point (refer diagram left).
3. Install wall and ceiling mounting brackets with suitable
screws(tosupportatotalweightof30kg)tothewallatthe
positions marked in diagram left.
4. Removetheprotectiveplasticlmfromthehoodbody
and hang hood on the mounting brackets then secure at
theanti-tiltlocationsasindicatedindiagramleft.
Depending on the preferred installation/ducting mode,
followstep5aor5bbelow.
5a.Recirculating mode (Fig. a). Using the centre line,
secure the ceiling mount bracket to the wall using
suitablescrews.AttachtherecirculatingT-piece
(optionalkitAR600RKformodelsERCM9010and
ERCE9020,orAR600RKGformodelERCG9030)to
the ceiling mount bracket. Install flexible pipe between
T-pieceandfantransitionoutlet.Usecabletiesor
suitableducttapetosecureexiblepipetoT-piece.
NOTE: When installed in recirculation mode, it is recommended
to use a carbon filter (included in recirculation kit AR600RK for
models ERCM9010AS and ERCE9020AS, or recirculation kit
AR600RKG for model ERCG9030AS, refer to page 9) to prevent
odours being emitted back into the room. OR
5b.Ducted mode (Fig. b). The canopy rangehood has been
supplied with flexible exhaust pipe and duct transition
piece,alternativelya150mmdia.non-combustibleue
pipe can be used. Continue the centre line to the ceiling.
Attach the ceiling mount bracket on the centre line. Fit
preferred flue pipe to the fan transition duct.
ERCG9030AS
ERCM9010AS
ERCE9020AS
(a) (b)
ERCM9010AS & ERCE9020AS
ERCG9030AS

electrolux e:line rangehoods installation / using the rangehood 6 electrolux e:line rangehood installation 3
NOTE: For ducted mode, we recommend extending flue pipe
through the roof to external “china hat” to vent exhaust externally.
We do not recommend venting into ceiling cavity.
NOTE: Installation must be in accordence with local
building regulations.
NOTE: To ensure optimum performance of the rangehood, the
use of rigid ducting is recommended. The use of bends should be
avoided. Rigid flexible ducting is suitable, although loose flexible
ducting is unacceptable. All ducting must be fire retardant.
Installation of telescopic exhaust covers
Separate the inner and outer exhaust covers, and carefully
remove the protective coating from both. Carefully
reassemble the inner and outer exhaust covers sections by
sliding the inner into the outer exhaust cover. Carefully lower
the assembled inner and outer exhaust covers onto the top
of the cooker hood body, and insert the exhaust cover into
therangehoodbodyapproximately5mm.Fixinner(top)
exhaust cover to the ceiling mounting bracket with screws
supplied. Ensure that the inner (top) section is extended.
Care must be taken to ensure the screws are not cross
threaded when attaching the outer flue cover.
If installed in recirculating mode, insert the optional carbon
lter(includedinrecirculationkitAR600RKformodels
ERCM9010ASandERCE9020AS,orrecirculationkit
AR600RKGformodelERCG9030AS).
To complete the rangehood installation, insert the filter/s to
theundersideofthehoodbody.Placebackedgeoflter
into position and push up front edge so that the filter clips
into place.
Your Electrolux rangehood is now ready to use.
Installation Using the rangehood – ERCM9010AS
To operate Canopy
Depress any of the fan symbols, depending on desired fan
speed,toturnthecanopyon.DepresstheOFFbuttonto
turn canopy off.
Setting the power level required
Allbuttonshaveback-litsymbols.
Fan operation – select speed to suit cooking conditions.
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
High – grilling, intensive frying and wok cooking
To switch Lights ON and OFF
Depressthe‘light’buttontoturnthelightsONanddepress
‘light’buttonagaintoturnthelightsOFF.
Using the Timer
At the end of cooking if the timer is switched on, the
rangehoodwillcontinuetorunforanadditional5minutes
to remove any odours that remain at the completion of
cooking.After5minutesthecanopywillturnitselfOFF.
Auto Off
Depress‘autooff’buttontoturnthetimerONanddepress
‘auto off’ button again to cancel the timer function.
ERCM9010AS
ERCE9020AS ERCG9030AS

electrolux e:line rangehoods using the rangehood 7
Touch screen operation
Lock – Touch and hold ‘lock’ button for 3 seconds to lock
control interface when cleaning, touch and hold for 3 seconds
to unlock control interface.
Fan – select speed to suit cooking conditions.
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
High – grilling, intensive frying and wok cooking
Boost – increases air extraction when intense cooking &
frying is taking place, which is generally over a short time
framewhensearingfoods.Onselectingtheboostfunction
the fan intensity will increase for 1 minute, then revert back
to the last selected fan speed.
To switch Lights ON and OFF
Touchthe‘light’buttontoturnthelightsONandtouch
‘light’buttonagaintoturnthelightsOFF.
Using the Timer
At the end of cooking if the timer is switched on, the
rangehoodwillcontinuetorunforanadditional5minutes
to remove any odours that remain at the completion of
cooking.After5minutesthecanopywillturnitselfOFF.
Auto Off
Touch‘autooff’buttontoturnthetimerONandtouch
‘auto off’ button again to cancel the timer function.
Touch screen operation
Lock – Touch and hold ‘lock’ button for 3 seconds to lock
control interface when cleaning, touch and hold for 3 seconds
to unlock control interface.
Fan – select speed to suit cooking conditions.
Low – light frying/boiling
Medium – frying/wok cooking/heavy boiling
High – grilling, intensive frying and wok cooking
Boost – increases air extraction when intense cooking &
frying is taking place, which is generally over a short time
framewhensearingfoods.Onselectingtheboostfunction
the fan intensity will increase for 1 minute, then revert back
to the last selected fan speed.
To switch Lights ON and OFF
Touchthe‘light’buttontoturnthelightsONanddepress
‘light’buttonagaintoturnthelightsOFF.
Using the Timer
At the end of cooking if the timer is switched on, the
rangehoodwillcontinuetorunforanadditional5minutes
to remove any odours that remain at the completion of
cooking.After5minutesthecanopywillturnitselfOFF.
Auto Off
Touch‘autooff’buttontoturnthetimerONanddepress
‘auto off’ button again to cancel the timer function.
Using the rangehood – ERCG9030ASUsing the rangehood – ERCE9020AS

electrolux e:line rangehoods maintenance / halogen lamps 8
• Before maintenance or cleaning is carried out,
the canopy rangehood should be disconnected
from the main power supply. Ensure that the
rangehood is switched off at the wall socket
and the plug removed.
• External surfaces are susceptible to scratches
and abrasions, so please follow the cleaning
instructions to ensure the best possible result is
achieved without damage.
Stainless steel surface
Cleanstainlesssteelsurfacesusingnon-abrasivecleaning
products that are specifically for use on stainless steel.
To ensure best results also use an even pressure and follow
the grain of the stainless steel. Use of a soft cloth reduces
the risk of scratching. If the cloth is wet ensure that a dry
soft cloth is used to wipe down the surface again reducing
the risk of any surface rust appearing.
Control panel surface
The inlay control panel can be cleaned using warm soapy
water. Ensure the cloth is well wrung before cleaning.
Use a dry soft cloth to remove any excess moisture left
after cleaning.
Grease filters
The mesh filters can be cleaned either by hand or in
the dishwasher. After cleaning ensure that the filters are
completely dry before refitting.
By hand: Soak in warm water and some washing up liquid.
For stubborn grease stains use a soft nylon brush to help
remove these stains.
In a dishwasher: Ensure that placement of the filters
is made so as to not impede the function of the spray
arm. Washing the filters in a dishwasher may cause
discolouration of the aluminium inner mesh over time
although it will not affect their performance. Filters should
be washed separately to crockery and kitchen utensils.
Glass fascia
TheglassfasciaonmodelERCG9030AScanbecleaned
with window cleaner or a mild detergent and hot water and
paper towelling.
Using a small flat blade screwdriver remove the inner
stainless steel ring to obtain access to the halogen globe.
When removing the inner ring, do so carefully, as the glass
lens could easily fall out of the inner ring. Remove halogen
globe, whilst cool, and replace carefully with a new globe.
Therangehoodtakes2x20W,12volthalogenglobes.
When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
Maintenanceandcleaning Changing the halogen lamps

Optionalductingaccessories
electrolux e:line rangehoodsoptionalductingaccessories9
Part Numbers
ERCM9010AS* & ERCE9020AS* ERCG9030AS†Description
AR150RC AR150RC 150mmG/BondRoofCowl
AR150F AR150F 150mmG/BondFlue1200mm
AR150WV AR150WV 150mmWallVent+FlexiDuct
AR600RK* AR600RKG†RecirculatingKit
AR600CF* AR600CFG†Replacement carbon mat filter
AR600FS* AR600FSG†Stainlesssteelexhaustcoverextension1200mm
NOTE:Accessoriesaretobepurchasedseparately.
ERCG9030AS†
ERCM9010AS*
ERCE9020AS*