Electrolux ICON E488WV120S User manual

18" WALL-MOUNT CANOPY VENT HOOD
FEATURES
Nominal Width
Installation Type
Air Discharge
Air Delivery (CFM)
Blower Type
Controls
Infinite-Speed Blower
Dual Halogen Lights
Dishwasher Safe Stainless Steel Filters
Exhaust Duct
Duct Required
ACCESSORIES
18"-High Vent Duct Cover – PN# ACCVC18-48
12"-High Vent Duct Cover – PN# ACCVC12-48
6"-High Vent Duct Cover – PN# ACCVC06-48
SPECIFICATIONS
Overall Exterior Dimensions –
Height
Width
Depth
Power Supply Location
Voltage Rating
Connected Load (kW Rating) @120 Volts‡
Shipping Weight (Approx.)
‡For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate
ground wire. Appliance must be grounded for safe operation.
NOTE: Always consult local and/or national electric codes. Refer to Product Installation
Guide for detailed installation instructions on the web at electroluxicon.com.
Specifications subject to change.
48"
Wall Mount
Vertical or Horizontal
1200
Dual Centrifugal
Dial
Yes
Yes
Yes
External
10" Round
or (2) 3-1/4" X 10"
Optional
Optional
Optional
18"
47-7/8"
26-7/8"
Right Rear Top
120V/60Hz /15 or 20A
1.4
108 Lbs.
electroluxicon.com
Dual-Centrifugal Blower
Effectively removes the most persistent
food and cooking odors.
Infinite-Speed Blower Control
The ultraquiet blower allows you to dial in the
precise airflow needed.
Dual Halogen Lighting
with Dimmer Control
Two overhead halogen bulbs evenly illuminate
the cooking surface and provide abundant
light to enhance the cooking experience.
Dishwasher Safe Filters
Saturated filters can be rinsed and cycled
through the dishwasher. The stainless steel
filter provides strength and durability not
found in foam filters.
Designed for the well-lived home.
Wall-Mount Canopy Vent Hood
E488WV120S

18" Wall-Mount 48" Canopy Vent Hood Specifications
•
Product Weight –103 Lbs.
•
Wall-Mount Installation – can be ducted vertically or horizontally.
•
Voltage Rating –120V/ 60Hz/15 or 20 Amps
•
Connected Load (kW Rating) @120 Volts =1.4kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @120 Volts =12 Amps
•
Always consult local and/or national electric codes. Check local
building codes for installation requirements, as they may vary per locale.
•
Vent unit outside of building only.
•
Vertical Exhaust Duct Required – 10" round
•
Horizontal Exhaust Ducts Required – Dual 3-1/4"x10"
•
Thermal breaks such as short section of nonmetallic duct,
should be used in areas of extreme cold.
•
For most efficient airflow exhaust, use a straight run or as
few elbows as possible.
•
Use metallic flex ducting only to connect rigid duct directly to
transitions (if allowed by code).
•
Cold weather installations should have additional backdraft
damper installed.
•
For most efficient operation, position hood low to cooktop.
Recommended installation is 30"-36" above countertop.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
•
18"-High Vent Duct Cover – (PN# ACCVC18-48).
•
12"-High Vent Duct Cover – (PN# ACCVC12-48).
•
6"-High Vent Duct Cover – (PN# ACCVC06-48).
Wall-Mount Canopy Vent Hood
E488WV120S
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
Electrolux Major Appliances, N.A.
USA
•250 Bobby Jones Expressway •Augusta, GA 30907 •1-877-4electrolux (1-877-435-3287) •
electroluxicon.com
CANADA
•5855 Terry Fox Way •Mississauga, ON L5V 3E4 •1-800-265-8352 •
electroluxicon.ca
E488WV120S 01/09 © 2009 Electrolux Home Products, Inc. Printed in the U.S.A.
Electrical Location
Top
147/16"
11/2"
2 - 7/8" holes
11/2"
4"
Rear
2 - 31/4"x 10" Ducts
Equal Equal
6" 6"
Horizontal
Vertical
Top
61/8"
Equal Equal
1 - 10" Round Duct Collar
48" 30"min. from
cooktop surface to
bottom of hood
13"
max.
cabinet
depth
Vertical & Horizontal
Exhaust Duct Location
18"
117/8"
47 7/8"
26 7/8"