Eleiko 3061760 Series User manual


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
OWNERS MANUAL 3061760-XXX

ELEIKO CLASSIC HALF RACK





3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
2
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Read this owners manual before any usage on the ELEIKO equipment.
The equipment must be installed and used in a place whose access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment. ELEIKO recommends that all equipment is
secured to floor and installed by a licensed contractor or an ELEIKO-installer.
WARNING! READ SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on proper usage of the
equipment.
 All included warnings (labels) and instructions MUST be read before the use of any ELEIKO-equipment. Use each equipment
as it is intended for.
 A user MUST get a medical examination and proper instructions before the use of any ELEIKO-equipment.
 Don’t exceed the max user weight
 Don’t exceed the maximum load capacity
 A user MUST never use the equipment unattanded.
 Inspect the machine before usage after mounting and installation. NEVER use Eleiko-equipment that has missing parts or is
not complete.
 DO NOT let anyone, under any cuircumstances, use equipment that appears to be damaged. Do not try to repair any
equipment without consulting an ELEIKO technician.
 DO NOT replace the components of ELEIKO-equipment with other none ELEIKO equipment (magnetic safety pin, frames, bars,
bolts), do not improvise. If there are any doubts consult an ELEIKO representative prior to any intervention.
 DO NOT overload the equipment
 DO NOT try to exceed personal strength levels.
 Keep children under the age of 14 away from the equipment and teenagers must be supervised.
 DO NOT remove any safety labels from the ELEIKO-equipment. ELEIKO is not responsible if a label is removed. Replace
damaged labels immediately.
 DO NOT use this equipment for support during stretching, as this may result in serious injury.
REQUIRED FOOTPRINT AREA
Leave at least 0,6 m safety clearance for the unit all around it.
EQUIPMENT 0,6 m
0,6 m
0,6 m
0,6 m


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
3
INTENDED USE
PRODUCT SPECIFICATIONS 
TEHNCICAL SPECIFICATION
Overall Dimensions 1640x1720x2440 mm – 64.6x67.7x96 inches
Weight 180 kg – 397 lbs
Shipping Weight --
Max User Weight --
Max Load 350 kg

WARRANTY
Frame (not coating) 10 years
Structural parts 10 years
Weigth stacks 5 years
Pivot bearings 5 years
Any items not specified 3 years
Upholstery (cables/grips/springs) 6 months
Accessories 6 months

MAINTENANCE CHECKLIST 
ACTION HOW OFTEN?
Clean *Upholstery Daily
Inspect Hardware (Bolts tightened) Monthly
Inspect Frame Monthly
Inspect J-cup plastic Daily
Inspect Rollers Daily
Inspect Safety Arms/J-hooks (Welds and Structure) Daily
Clean Machine As Needed
Clean Grips As Needed
Lubricate Guide Rods As Needed
*Upholsteries: Use a damp microfiber cloth to clean the pads. If necessary, use a cleaning agent that is neutral or slightly alkaline.
PH 7-9. Spray water or washing solution on cloth and wipe padding surface clean. To remove more stubborn stains, spray the
spray directly onto the stain, allow the substance to act for 5 minutes, and wipe the surface with a cloth. Do not use a wet cleaning
method, padding seams are not waterproof and wet cleaning can cause irreversible damage. It is not advisable to use abrasive
products (rough noodle, rubbing board, beard) to clean the pads, which can damage the padding surfaces. Do not use alcohol or
solvent-based cleaners


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
4
INTENDED USE
UNPACKING
Thank you for purchasing an Eleiko product. Your Eleiko product is inspected before it is packaged. It is
shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm
all the components by matching them with the exploded diagrams. The weight stack is shipped in separate
packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the
packing materials in accordance with your local laws.
TOOLS REQUIRED FOR ASSEMBLY


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
5
INTENDED USE
STEP 1 | VERIFY THAT ALL PARTS ARE INCLUDED


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
6
INTENDED USE
STEP 2 | INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
7
INTENDED USE
STEP 3| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
8
INTENDED USE
STEP 4| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
9
INTENDED USE
STEP 5| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
10
INTENDED USE
STEP 6| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
11
INTENDED USE
STEP 7| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
12
INTENDED USE
STEP 8| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
13
INTENDED USE
STEP 8| INSTRUCTIONS


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
14
INTENDED USE
This unit is intended for performing a variety of lifting exercises, such as squats but also bench press. The rack has
two height adjustable barbell j-hooks and two height adjustable safety arms. While the barbell lays on the barbell j-
hooks you can adjust the barbell horizontally by the rollers in the j-hooks. Always find a good height position for the
safety arms, so they catch the barbell in case of missing racking the barbell back in the barbell J-hooks.
A
Ideally use a barbell that meets or is IWF/IPF-certified
B
Align your grip, based on the grip markings and don’t go grip the barbell too wide.
C
Always load the barbell evenly before lifting
D
Make sure the J-cups are aligned horisontally and that the pop pin is engaged into the hole before usage
E
Always align the barbell center to the unit before lifting
F
Always lock the discs on the barbell with a collar on both sides
G
Pull the pop pin to adjust vertically along the upright.
H
Store bigger discs on the outside of the rack on the weight pins
I
Store smaller discs and collars on the inside of the rack on the weight pins
J
Make sure the safety arms are aligned horisontally and that the pop pin is engaged into the hole before usage. Note! Don’t
intenionally drop the barbell onto safety arm. Regurarly check the safety arms.
K
Rubber Band attachments
L
By removing the end caps there are bolt down holes for anchoring the unit to the floor. Don’t forget to put back the end cap
after anchroing.


3061760_M ELEIKO CLASSIC HALF RACK OWNERS MANUAL
15
CONTACT
ELEIKO GROUP
Klastorpsvägen 18
SE-302 62 Halmstad
SWEDEN
[email protected]
Phone: [phone]