Eleiko Classic Series User manual

ELEIKO SVR PLATFORM
Classic Line - small
Art.no. 3061381

CAUTION
The equipment must be installed and used in a place whose access and supervision
are specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment.
Attach the corners to floor with appropriate fasteners.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and
supervising personnel on proper usage of the equipment.
1. All included warnings (labels) and instructions MUST be read before the use of any
ELEIKO-equipment. Use each equipment as it is intended for.
2. A user MUST get a medical examination and proper instructions before the use of
any ELEIKO-equipment.
3. DO NOT let anyone, under any cuircumstances, use equipment that appears to be
damaged. Do not try to repair any equipment before consulting an ELEIKO technician.
4. DO NOT replace the components of ELEIKO-equipment with other none ELEIKO-
equipment (magnetic safety pin, frames, bars), do not improvise. If there are any
doubts consult an ELEIKO representative prior to any intervention.
5. DO NOT overload the equipment and DO NOT try to exceed personal strength
levels.
6. Children and teenagers must be supervised by a knowledgeable adult.
7. DO NOT remove any safety labels from the ELEIKO-equipment. ELEIKO is not
responsible if a label is removed. Replace damaged labels immediately.
PREVENTITIVE MAINTENANCE & INSPECTIONS
Regularly:
Clean the surfaces on frames and tubes from dust and dirt. Vaccum clean rubber tiles.
Check that all bolts between parts and floor are properly tightened, according to
recommendations.
WARRANTY
Tubings and corners: 3 years
Foam, wooden deck, rubber tiles: 1 year
Normal wear and tear does not fall under the warranty.
ADDITIONAL INFORMATION
This equipment is for indoor use only.
READ BEFORE INSTALLATION AND USE

1142
988
1500
1500
1500
1500
Weightlifting training platform. For indoor use only.
Add sufficient
clearance, not less
than 1.5 m (59 in),
on all sides.
Product weight 276 kg / 608 lbs
Dimensions (L x W x H)
2565x2470x100 mm
101x97.2x3.9 in
PRODUCT SPECIFICATION
FOOTPRINT AND FREE AREA

x16
Art.no: 2000675-L16 SS
screw M10x16
side tube
x2
back tube
x1
x4
bracket
front tube
x1
insert cover
side
x2
insert cover
front
x1
x15
Wood screw 4x35
Art.no: 2000726
x4
corner
wooden plate
3001400
x1
Foam 666x695x70 mm
x4
Art.no: 2000803
rubber tile
x2
Foam YELLOW
666x695x12,7 mm
x4
Foam 500x975x70 mm
x1
Foam 2000x975x70 mm
x1
CONTENTS

Allen key size 8 mm (M10)
REQUIRED TOOLS
Phillips screwdriver

screw M10x16
x16
bracket
x4
AW
AU
AV
Loose screws!
corner
x4
1.
x4
ASSEMBLY INSTRUCTIONS

front tube
x1
Foam 500x975x70 mm
x1
Foam 2000x975x70 mm
x1
2.

Foam
666x695x70 mm
x4
Foam YELLOW
666x695x12,7 mm
x4
3.

wooden plate
3001400
x1
2000803
rubber tile
x2
4.

side tube
x2
back tube
x1
corner assys
x4
5.

Tighten frame and screws!
6.

wood screw
L=35
x15
insert cover
side
x2
insert cover
front
x1
edge to edge
7.

Eleiko Group AB | Klastorpsvägen 18 | SE-302 62 HALMSTAD | Sweden
E-mail: [email protected] | Phone: [phone]
www.eleiko.com
rev. 1805