Eleiko 3085806 User manual

ELEIKO DUAL
ADJUSTABLE PULLEY
Art.no. 3085806

Read before installation and use
Safety instructions
Warning labels
List of components
Assembly instructions
Tools needed
User guide
Purpose
General instructions for use
Product specifications
Care and maintenance
Preventive maintenance and inspections
Spare parts and service
Warranty
4
4
5
6
9
9
64
64
64
64
65
65
65
65
NOTE! YOU WILL ONLY NEED TO USE THIS MANUAL!
YOU WILL NOT NEED THE MANUAL THAT CAME IN THE WOODEN BOX
TOGETHER WITH THE CABLE ATTACHMENT!
CONTENTS

Install and use this equipment in a place where access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and level the equipment properly. Eleiko recommends that all
equipment is installed by a licensed contractor or an Eleiko installer.
This equipment is intended for indoor use only.
SAFETY INSTRUCTIONS
It is the responsibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on
proper usage of the equipment. It is also the responsibility of the purchaser of ELEIKO products to assess the
suitability of the floor, and to choose appropriate fasteners depending on floor type when using ELEIKO products
that needs to be bolted to the ground.
All included warnings (labels) and instructions MUST be read before the use of any Eleiko 1.
equipment. Only use the equipment as it is intended.
A user MUST get a medical examination and proper instructions before using any Eleiko 2.
equipment.
DO NOT let anyone, under any circumstances, use equipment that appears to be damaged. Do not 3.
try to repair any equipment before consulting an Eleiko technician.
DO NOT replace components of Eleiko equipment with other, none Eleiko, equipment (magnetic 4.
safety pin, frames, bars etc.). Do not improvise! If there are any doubts, consult an Eleiko
representative prior to any intervention.
DO NOT overload the equipment and DO NOT try to exceed personal strength levels. 5.
Children under the age of 14 must be supervised by an adult. 6.
DO NOT remove any safety labels from the Eleiko equipment. Eleiko is not responsible if a label is 7.
removed. Replace damaged labels immediately.
Eleiko packaging for products an be made of wood. Be aware of splinters! You MUST use 8.
protective gloves and proper work wear.
Eleiko packaging material could be a risk when handling. Be aware of crushing! You MUST use 9.
work wear including protective gloves and hard shoes.
Eleiko products and packing material are heavy, You MUST use proper lifting techniques, work 10.
wear and hard shoes.
- 4 -
READ BEFORE
INSTALLATION AND USE

- 5 -
WARNING LABELS

2x
2001845
2x
2001302
2x
2001592
2x
2001299
2001373
4x
2x
2001320
2x
2001859
1x
3085806a1
1x
3085806p6
1x
2001860a1
4x
M16x110
2001385-L110
20x
M16x100
2001385-L100
44x
Washer M16
2001421
20x
Locking Nut M16
2001379
- 6 -
Screw Kit 2001937
LIST OF COMPONENTS

4x
3085601 p3
2x
3085601 a1
(120kg)
3085850 a1
(90kg)
3085601 a3
2x
2x
3085601 a7
4x
3085601 p11
2x
3085601 p25
2x
3085601 a6
2x
3085601 a8 3085601 a9
2x
CABLE
2x
3002075
(7,9m for 120 kg & 8,2m for 90 kg)
2001806
3000146
2x
3085601 a2
38x
(120 kg)
28x
(90 kg)
2001590
- 7 -
LIST OF COMPONENTS

3085601 p8
2x
4x
3085570 p33
4x
3085570 p34
3085601 p9
2x
4x
2001000
2x
3085601 p6
M16 x 110
2001385-L110
2x
Washer M16
2001421
20x
Locking Nut M16
2001379
10x
M16 x 100
2001385-L100
8x
K6S M8 x 12
2001620-L12
28x
Washer M8
2001422
32x
K6S M8 x 30
2000747-L30
4x
2001483
2x
2x
Double Wheel Kit
3085601 p15
2001482
2001619-L45
2x
2001482
3085570 p36
2001619-L45
Single Wheel Kit
Hollow Screw
2x
2001485
2000780-M12
2x
2001808
- 8 -
LIST OF COMPONENTS

Socket Wrench Size 24mm
Allen Key Size 6 Allen Key Size 5 Allen Key Size 4
Allen Key Size 8
0,6 0,6
0,6 0,6
- 9 -
Before assembly, make sure you have enough clearance on all
sides of the equipment, not less than 0,6 meters. Take in account
the accessibility to remove and replace bar and weights.
TOOLS NEEDED
You need the following tools to assemble the equipment.
NOTE: Do not use electric power tools for assembly.
Wrench Size 24mm Wrench Size 17mm
ASSEMBLY INSTRUCTIONS

- 10 -
Eleiko recommends that this product should be bolted to the ground. Make sure
the ground is solid and level. Consult a licensed contractor to choose the
appropriate anchoring fasteners for your facility.
See assembly instructions for the position of the anchoring points.
BOLT TO GROUND

1x
2001845 2001373
1x
1.
- 11 -

1x
2001592
2.
- 12 -
Remove screws and plate from floor beam!
You will not need these parts!

1x
2001302
1x
M16x110
1x
M16x100
3x
Washer M16
1x
Locking Nut M16
M16x110
M16x100
LOOSE SCREWS!
3.
- 13 -

1x
2001320 2001373
1x
4.
- 14 -

M16x110
M16x100
LOOSE SCREWS!
1x
M16x110
1x
M16x100
3x
Washer M16
1x
Locking Nut M16
1x
2001859
5.
- 15 -

This locking nut and washer
will be mounted later!
LOOSE SCREWS!
3x
M16x100
5x
Washer M16
2x
Locking Nut M16
1x
2001299
6.
- 16 -

1x
2001845 2001373
1x
7.
- 17 -

1x
2001592
8.
- 18 -
Remove screws and plate from floor beam!
You will not need these parts!

1x
2001302
1x
M16x110
1x
M16x100
3x
Washer M16
1x
Locking Nut M16
M16x100
M16x110
LOOSE SCREWS!
9.
- 19 -

1x
2001320 2001373
1x
10.
- 20 -