Eleiko 3002379 User manual

Assembly instructions 3002379 Eleiko Group AB
Eleiko Single Tier Dumbbell Rack
3002379
ASSEMBLY INSTRUCTIONS

Assembly instructions 3002379 Eleiko Group AB
1. Assemble two parts (1) with part (2). Use four screws M10x30 and nuts M10.
2. Assemble the part above with legs (3) and (4). Make sure the Eleiko lable is facing outwards.
Use four screws M10x30.

Assembly instructions 3002379 Eleiko Group AB
3. Assemble two dumbbell holders (5) and two dumbbell holders (6) in the middle with four
long screws M10x45 and nuts M10.
4. Assemble the rest of dumbbell holders (5) and (6) with screws M10x35 and nuts M10.

Assembly instructions 3002379 Eleiko Group AB
Parts of Content
No
1 2 x Table part
2 1 x Sheet metal 215x280 mm
3 1 x Left leg
4 1 x Right leg
5 10 x Dumbbell holder
6 10 x Dumbbell holder, small
8 x Screw M10x30
16 x Screw M10x30 countersink
4 x Screw M10x45 countersink
24 x Nut M10