Eleiko 3002380 User manual

www.eleiko.com
Eleiko Two Tier Dumbbell Rack
3002380
ASSEMBLY INSTRUCTIONS

www.eleiko.com
1. Assemble two parts (1) with part (2). Use four screws M10x30 and nuts M10. Do two sets of
assemblies, one with part (2) with Eleiko logo and one with part (2) without Eleiko logo.
2. Assemble the parts above with legs (3) and (4). Make sure the Eleiko lable is facing outwards
and the shelf with Eleiko logo is atop. Use eight short screws M10x30.

www.eleiko.com
3. Assemble four of each dumbbell holders (5) and (6) in the middle with eight long screws
M10x45 and nuts M10.
4. Assemble the rest of dumbbell holders (5) and (6) with screws M10x30 and nuts M10.

www.eleiko.com
Parts of Content
No
1 4 x Table part
2 2 x Sheet metal 215x280 mm (with and without Eleiko logo)
3 1 x Left leg
4 1 x Right leg
5 20 x Dumbbell holder
6 20 x Dumbbell holder small
16 x Screw M10x30
32 x Screw M10x35 countersinked
8 x Screw M10x45 countersinked
48 x Nut M10