Inspire DUAL CHIN DIP Supplement

ASSEMBLY & OPERATION MANUAL
RECORD SERIAL NUMBER HERE
www.inspirefitness.com by Health In Motion LLC 9-10-19
DUAL CHIN DIP

CONGRATULATIONS… You’ve just taken the first step to a healthier
and stronger body. This Dual Chin Dip machine by Inspire offers the key to
unlocking your body’s potential. Regular strength training on a multi-gym
has been shown to deliver a host of benefits including: increased muscle
tone, decreased body fat, improved energy levels, a reduction in stress, and
improved cardiac output. Once again, congratulations, you are on your way
to improving your self image, overall health, and quality of life.
BEFORE ASSEMBLING YOUR CHIN DIP
IMPORTANT: Read this entire manual before attempting to build or use
this Dual Chin Dip machine. This manual contains step by step instructions
for proper assembly.
Use the parts list included in this manual to verify that all parts are
accounted for before assembly. If any parts are missing, contact the dealer
of this Dual Chin Dip machine for replacement parts or call Inspire at 877-
738-1729.
Make sure that adequate room has been cleared before attempting to build
your Dual Chin Dip machine. A rubber mat is recommended for use under
your Dual Chin Dip machine to protect wood flooring or carpeting from
damage during assembly and usage. In a multi-use setting or commercial
setting, it is recommended that the machine be bolted to the floor through
the holes in the base plates.
This Dual Chin Dip machine is intended for indoor use only. Rust can form
on certain parts in a humid environment resulting in impaired function.
Service of your Dual Chin Dip machine should only be preformed by an
authorized Inspire dealer. Service preformed by anyone else can result in
loss of warranty. If you need help finding an authorized dealer, please
contact us directly:
Inspire Fitness
255 Airport Circle
Suite 101
Corona, CA 92880
Ph: 877-738-1729
Fx: 714-738-1728
www.inspirefitness.com

TABLE OF CONTENTS
Section Description……………………………………………………. Page
Important Safety Instructions………………………………………. 1
Tools Required………………………………………………………………… 1
Parts & Hardware List……………………………………………………. 2
Cable Charts…………….……………………………………………………. 3
Assembly Instructions……………………………………………………. 4
Decal Reference……………………………………………………………… 27
Decal Placement…………………………………………………………….. 29
Training Tips…………………………………………………………………… 30
General Maintenance Information…….…………………………… 31
Maintenance Schedule…….……………………………………………… 32
Limited Warranty…………………………………………………………….. 33

Page 1
IMPORTANT SAFETY INSTRUCTIONS
Please read this entire manual and familiarize yourself with all decals and
warnings before using this Dual Chin Dip machine.
• WARNING! It is necessary to inspect this Dual Chin Dipmachine
regularly to maintain safety and proper function. Please use the
maintenance schedule included towards the back of this manual.
Immediately replace any and all defective or worn parts. Pay special
attention to moving parts such as the cables and pulleys and connections
to accessories. See General Maintenance section for complete details.
• Use this Dual Chin Dip machine for its intended purpose as described in
this Operation Manual or the Exercise Book. Do not use attachments not
recommended by the manufacturer.
• Make sure bystanders are at least 5 feet away from the Dual Chin Dip
machine while it is in use.
• Keep children off the Dual Chin Dip machine at all times.
• Keep the Dual Chin Dip machine away from walls and clear of any
obstructions.
• Stop immediately if you experience shortness of breath, pain, or dizziness
during your workout. Inspire strongly recommends consulting your
doctor before starting an exercise program.
TOOLS REQUIRED FOR ASSEMBLY
• Metric socket set (including 16mm, 17mm, 18mm, and 19mm sockets)
•Metric wrenches (16mm, 17mm, 18mm, and 19mm)
•4mm, 5mm, and 6mm Allen wrenches (supplied in hardware pack)
• Adjustable wrench
•Philips screwdriver

Page 2
Item Parts Description Qty Qty Rec'd Item Hardware Description Qty Qty Rec'd
1 Main Frame 1 1 M10 x20 HexBolt 8
2 Guide Cable Support 1 2 M10 x25 HexBolt 15
3 Upright 1 1 3 M10 x50 HexBolt 2
4 Lower Attachment Arm 1 4 M10 x50 Threaded Hex Bolt 3
5 Upper Atachment Arm 1 5 M10 x65 HexBolt 8
6 Base Frame 1 6 M10 x70 HexBolt 5
7 Right Leg 1 7 M10 x75 HexBolt 9
8 Left Leg 1 8 M10 x90 HexBolt 4
9 Lower Pulley Bracket 1 9 M10 x95 HexBolt 4
10 Linear Shaft 2 10 M10 x100 Hex Bolt 5
11 Linear Shaft Mount 4 11 M10 x120 HexBolt 2
12 Knee Pad Slider 1 12 M10 x25 Button Head Bolt 19
13 Knee Pad Support 1 13 M10 x95 Button Head Bolt 2
14 Knee Pad 1 14 M10 x100 Button Head Bolt 2
15 Upper Arm, Left 1 15 M10 x25 Counter Sunk Bolt 6
16 Upper Arm, Right 1 16 M12 x75 HexBolt 1
17 Upper Frame 1 17 M8 x20 HexBolt 2
18 Climbing Grip, Left 1 18 M8 x100 HexBolt 1
19 Climbing Grip, Right 1 19 M8 x20 Button Head Bolt 2
20 Left Upper Handle 1 20 M8 x45 Button Head Bolt 2
21 Right Upper Handle 1 21 M8 x12 Button Head Bolt 7
22 Lower Pulley Arm 1 22 M6 x12 Button Head Bolt 10
23 Plastic Cover 1 1 23 M4 x60 Phillips Head Screw 1
24 Plastic Cover 2 1 24 M4 x15 Phillips Head Screw 5
25 Rubber Donuts 4 25 M3 x5 Phillips Head Screw 5
26 Guide Rods 4
27 Top Weight Stop Assembly 2 26 M10 Flat Washer 130
28 Top Weight/Selector Stem 2 27 M8 Flat Washer 19
29 Upper Pulley Mount, Left 1 28 M6 Flat Washer 10
30 Upper Pulley Mount, Right 1 29 M10 Large OD Flat Washer 2
31 Rear Shroud Plate Support 1 30 M12 Washer 2
32 Upper Metal Shroud 1
33 Lower Metal Shroud 1 31 M10 Locknut 44
34 Fabric Shroud 1 32 M8 Locknut 7
35 Left Metal Shroud Plate 1 33 M12 Locknut 1
36 Right Metal Shroud Plate 1 34 Slotted Cable Bolt 2
37 Metal Shroud Placard Left 1
38 Metal Shroud Placard Right 1 35 Weight Pin 2
39 Rubber Cup 2 36 4 mm Allen Wrench 1
40 Rubber Tablet Holder 1 37 5 mm Allen Wrench 1
41 Molded Top Cap 1 38 6 mm Allen Wrench 1
42 Guide Rod Lube 1 39 6 mm Allen Wrench 1
43 Touch-up Paint 1
44 3 1/2" Pulley 2
DUAL CHIN DIP PARTS & HARDWARE LIST

Page 3
CHIN DIP CABLE CHART
Cable lengths are in millimeters and for reference only.
Cable lengths could change at any time without notice.
Connector Cable p/n GM887-500-003
Assisted Cable p/n GM887-500-002
Weighted Cable p/n GM887-500-001
1260 mm
4030 mm
4682 mm

Page 4
ASSEMBLY INSTRUCTIONS

Page 5
Step 1: Attach Upright 1 to the Main Frame using: 2 - M10 x 25 Hex Bolts
2 - M10 x 95 Hex Bolts
6 - M10 Flat Washers
2 - M10 Locknuts
NOTE: Finger Tighten Only.
Step 2: Attach Guide Cable Support to Main Frame
and Upright 1 using: 4 - M10 x 75 Hex Bolts
8 - M10 Flat Washers
4 - M10 Locknuts
NOTE: Finger Tighten Only.
4 - M10 x 75 Hex Bolts
8 - M10 Flat Washers
4 - M10 Locknuts
Step 2
Guide Cable
Support
Main Frame
Upright 1
2 - M10 x 25 Hex Bolts
2 - M10 x 95 Hex Bolts
6 - M10 Flat Washers
2 - M10 Locknuts
Step 1

Page 6
Step 3: Attach the Lower Attachment Arm to Upright 1 using: 1 - M10 x 70 Hex Bolts
2–M10 x 120 Hex Bolt
6 - M10 Flat Washers
3 - M10 Locknuts
NOTE: Finger Tighten Only.
1 - M10 x 70 Hex Bolts
2 - M10 x 120 Hex Bolt
6 - M10 Flat Washers
3 - M10 Locknuts
Step 3
Lower Attachment
Arm
Upright 1

Page 7
A
Step 4: Attach the Left leg to Base Frame using: 2 - M10 x 95 Button Head Bolts
2 - M10 x 95 Hex Bolts
8 - M10 Flat Washers
4 - M10 Locknuts
1 –M8 x 45 Button Head Bolts
2 –M8 Flat washers
1 –M8 Locknut
NOTE: Finger Tighten Only.
Step 4
2 –M10 x 95 Button Head Bolts
2 –M10 x 95 Hex Bolts
8 –M10 Flat Washers
4 –M10 Locknuts
1 –M8 x 45 Button Head Bolts
2 –M8 Washers
1 –M8 Locknut
Base Frame
Left Leg