Elinz GEAY5 User manual

www.elinz.com.au / [e-mail] / 1300 881 773
Vehicle Monitor
Operation Manual

www.elinz.com.au / [e-mail] / 1300 881 773
U-Bracket Installation
1. Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.
2. Finished the installation. Adjust the angle forward 30°to backward 30°. User can adjust a
suitable angle by oneself.
Plastic/Metal Bracket Installation
1. First, fix the bracket via the screws, the screws of the top need lock to nut of under.
2. Next, put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back
of the monitor.

www.elinz.com.au / [e-mail] / 1300 881 773
3. Move the bracket to the proper location.
4. Screw down the nut of bracket, until the monitor is fastened.
WIRING DIAGRAM

www.elinz.com.au / [e-mail] / 1300 881 773
AV Connector
RCA Connector

www.elinz.com.au / [e-mail] / 1300 881 773
Menu Operation Instruction
Press “MENU" , the screen will show“PICTURE”.
Press , to select other feature. Press
Press “MENU” over and over again, the screen will show pictures as below
Brightness Adjust 0 –100 Volume 0 –100
Contrast Adjust 0 –100
Color Adjust 0 –100
Language Optional
Reset
Rotate Up/Down/Left/Right PAL/NTSC/AUTO Optional
Display Format 4:3/16:9 Reversing image delay 0 –15S
VIV2 Playback Guide Lines Optional
Trigger Start up optional Light Sensor Optional
Sleep 0 –240mins

www.elinz.com.au / [e-mail] / 1300 881 773
Specifications

www.elinz.com.au / [e-mail] / 1300 881 773
Keystroke Instruction

www.elinz.com.au / [e-mail] / 1300 881 773
Remote Instruction