Elkay Elite ESE202010 User manual

Model ESE2020103 Illustrated
10-1/8"
2-1/4" R
4" 4"
20"
15-3/4"
20"
14"
3" R
4"
2-1/4"
1
4" 4"
3
HOLE DRILLING
CONFIGURATIONS
GENERAL
Good quality sink formed of #20 gauge, type 301 nickel bear-
ing stainless steel. Self-rimming.
DESIGN FEATURES
Bowl Depth: 10-1/8".
Coved Corners: 3" vertical radius, 2-1/4" horizontal radius.
Finish: Bowl surfaces are polished to an ultra radiant finish.
Deck and bowl radius have mirror finish.
Underside: Fully undercoated to dampen sound and prevent
condensation.
OTHER
Drain Opening: 3-1/2".
Note: Unless otherwise specified, sink is furnished with 3 faucet
holes as shown.
This sink does NOT comply with ASME A112.19.3.
OPTIONAL ACCESSORIES
Rinsing Baskets: LKWRB1316SS, LKWERBSS.
Utensil Caddy for Rinsing Basket: LKWUCSS.
Bottom Grid: LKWBG1415SS.
Cutting Board: CB1516.
Elkay 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2007 Elkay
(Rev. 7/07) 1-167A
elkayusa.com
Model ESE2020103
In keeping with our policy of continuing product improvement, Elkay reserves the right to change
product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user. When making a comparison of other producers’ offerings, be certain these features are not
overlooked.
ALL DIMENSIONS IN INCHES, TO CONVERT
TO MILLIMETERS MULTIPLY BY 25.4.
Elite by Elkay™ Single Bowl Sink
Model ESE202010
®
SPECIFICATIONS
Cutout in
Countertop No. of
Inside 11/2" Radius 11/2" Dia. Minimum
Model Overall Each Bowl Corners Faucet Cabinet
Number L W L W D L W Holes Size
ESE202010 20 20 153/414 101/8193/8193/81 or 3 24
SINK DIMENSIONS (INCHES)*
* Length is left to right. Width is front to back.