Elkay EWMA9620SBC User manual

Model A B C D E F G H I J K
Number in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
EWMA9620 96 2438 20 508 93 2362 161/2419 48 1219 11/238 10 254 2 51 24 610 12 305 8 203
8-7/8"
(225mm)
3-1/2" (89mm) DIA. FOR LK18B DRAIN
1/4" R
(6mm)
FF
H
A
C
E
D
36" (914mm)
SUGGESTED
FLOOR TO
RIM HEIGHT7-3/4"
(197mm)
7/16" (11mm) x
3/4" (19mm) SLOT
STAINLESS
STEEL BRACKETS
91"
(2311mm)
7/16" (11mm) DIA. HOLE
6-3/8"
(162mm)
1-1/2" (38mm) O.D.
J I
B
E
WALL
HANGER
G
K
H
3-1/2"
(89mm)
9-1/8"
(232mm)
1/4" R (6mm)
5-3/8"
(137mm)
1-1/4" (32mm)
DIA.
4 HOLES
I I J
13-3/4"
(349mm)
7-3/4"
(197mm)
F
4-1/4"
(108mm)
G
KH
H
14"
(356mm)
Four Station Wall Mounted Wash Sink
With Sensor Faucets, Battery Powered
Models EWMA9620SBC,
EWMA9620SBMC and EWMA9620SBTMC
®
SPECIFICATIONS
GENERAL
EWMA9620 #14 gauge, type 304 (18-8) stainless steel four
station wash sink with 1/4" (6mm) radius coved corners. 1-1/2"
(38mm) wide inward sloping top channel rims, with 2" (51mm)
flat apron. Full length 10" (254mm) high backsplash. Rim
corners are square. Exposed surfaces are hand blended to a
uniform satin luster finish. Furnished with wall hangers and
stainless steel support brackets.
(CHECK MODEL SPECIFIED) MIXING
MODEL FAUCET DRAIN VALVE
EWMA9620SBC LK722B (4) LK18B NONE
EWMA9620SBMC LK722B (4) LK18B LK724 (4)
EWMA9620SBTMC LK722B (4) LK18B LK723 (4)
LK722B Sensor-operated, non-mixing (tempered water), back-
splash-mounted gooseneck faucet with adjustable sensor
eyes. A continuous beam is emitted from sensor. The sensor
faucet is activated by user placing hands under the spout.
Tempered water will flow as long as hands remain within sen-
sor range. When hands are removed, the water stops automat-
ically based on shut off delay settings. The sensor then resets
and is ready for the next user. Battery powered and has a bat-
tery holder with (4) AA batteries. Chrome plated - solid brass
body construction and 12-3/4" (324mm) high (bottom of base
to top of spout), 8-3/4" (222mm) from aerator to base, 5-3/8"
(137mm) reach C.P. spout with 2.0 gpm laminar flow control on
spout end. Includes vandal-resistant, water-resistant sensor
control module with armored vandal-resistant control and
power cables. Slow-closing piston operated solenoid valve, in-
line filter with clean out trap, and 3/8" (10mm) copper fittings
for supply tube furnished by contractor. Control circuit is solid
Elkay 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2002 Elkay
(Rev. 7/02) 3-48A
www.elkay.com
Model EWMA9620SBC
DIMENSIONS
state, has adjustable sensor range (6" [152mm] preset to 30"
[762mm]), shut off delay preset at 1 second and field adjustable
to 2, 4 or 8 seconds, and automatic time-out feature (to prevent
sink overflow) is preset at 0 seconds and is field adjustable to
15, 30 or 60 seconds.
LK18B Stainless steel perforated grid strainer with 1-1/2"
(38mm) O.D. stainless steel tailpiece.
LK723 Anti-scald thermostatic mixing valve with nickel-plated
brass body 1/2" (13mm) SWT inlets and outlet connections,
check valves on inlets and a mixed temperature range of
80°- 120°F
. Certified under ASSE1016.
LK724 Mechanical mixing valve with C.P. brass body, 3/8"
(10mm) compression inlets and outlet connections, and check
valves on inlets.

ROUGH-IN DIMENSIONS
®
Elkay 2222 Camden Court
Oak Brook, IL 60523 Printed in U.S.A. ©2002 Elkay
3-48A (Rev. 7/02)
Four Station Wall Mounted Wash Sink
With Sensor Faucets, Battery Powered
Models EWMA9620SBC,
EWMA9620SBMC and EWMA9620SBTMC
SINK
SINK
C D D D D D D CC CE E
ABBA
WALL HANGER
16-15/16"
(430mm)
5-3/8"
(137mm)
18-1/16"
(459mm)
7/8"
(22mm)
43-13/16"
(1113mm)
(PROVIDES
36" [914mm]
FINISHED FLOOR
TO RIM HEIGHT)
FINISHED FLOOR
NOTE:
ALL FASTENERS
SUPPLIED BY OTHERS
8-5/8"
(219mm)
1-5/8"
(41mm)
C CC CC CC C
1-5/8"
(41mm) 1-5/8" (41mm)
1-5/8"
(41mm)
1/2" (13mm)
IPS SUPPLY
INLET
(8 PLACES)
1/4" (6mm) x
1" (25mm)
LONG SLOT
(12 PLACES)
OUTLINE
OF SINK
3/16" (5mm) x
5/8" (16mm)
LONG SLOT
(8 PLACES)
7/16" (11mm) x
3/4" (19mm)
LONG SLOT
(2 PLACES)
7/16" (11mm)
DIA. HOLE
(2 PLACES)
1-1/2" (38mm)
IPS WASTE
5-7/16"
(138mm)
23"
(584mm)
FOR EWMA9620SBTMC
FOR EWMA9620SBMC
10-1/4"
(260mm) 5-3/8"
(137mm)
MOUNTING
HARDWARE
CONTROL BOX
WITH LK729
BATTERY HOLDER
& BATTERIES
2-1/2"
(64mm)
30"
(762mm)
MAX NOTE:
USE TEFLON TAPE FOR
ALL WATER CONNECTIONS.
DO NOT USE PIPE DOPE.
SENSOR
3/8" (10mm)
SUPPLY LINE
(NOT SUPPLIED)
SOLENOID VALVE
IN-LINE FILTER
NYLON WASHER
8-3/4"
(222mm)
SINK
BACKSPLASH
MOUNTING
BOLT
LK724 – MANUAL
MIXING VALVE
TEMP.
ADJUST
STOP VALVES,
FITTINGS &
3/8" (10mm)
SUPPLY LINES
(NOT SUPPLIED)
COMPRESSION TO SWEAT
ADAPTER 3/8" (10mm) x 1/2" (13mm)
(3-REQ’D) & 1/2" (13mm) SUPPLY
TUBE (NOT SUPPLIED)
90 DEGREE ST. EL.
(2 REQ’D) NOT SUPPLIED
STOP VALVES, FITTINGS
& 3/8" (10mm) SUPPLY LINES
(NOT SUPPLIED)
LK723
THERMOSTATIC
MIXING VALVE
TEMP.
ADJUST
LK726
LAMINAR
FLOW CONTROL
2.0 GPM
Model A B C D E
Number in. mm in. mm in. mm in. mm in. mm
EWMA9620 24 610 12 305 4 102 10 254 5 127
DIMENSIONS