Elmo P10HD User manual

BUNDLED
ITEMS
ADVANCED
OPERATIONS
BASIC
OPERATIONS
TROUBLE
SHOOTING
SPECIFICA-
TIONS
English
Visual Presenter
P10
INSTRUCTION MANUAL
Please read this instruction manual carefully before
using this product and keep it for future reference.

i
English
IMPORTANT SAFEGUARDS
Read Instructions
All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions
The safety and operating instructions should be retained for future reference.
Heed Warnings
All warnings on the product and in the operating instructions should be adhered to.
Follow Instructions
All operating and use instructions should be followed.
Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
Water and Moisture
Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, and the like.
Placement
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating, and these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
Lamp
Do not cover the lamp with cloth or paper.
It may cause fire.
Do nor remove the lamp cover.
Inside of the lamp part becomes hot and you may get burnt.
For servicing, consult the dealer.

ii
English
Power Sources
This product should be operated only from the type of power source indicated on the marking label. If you are
not sure of the type of power supply to your home consult your appliance dealer or local power company. For
products intended to operate from battery power, or other sources, refer to the operating instructions.
Grounding or Polarization
This product may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than
the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. The 2-wire polarized plug will
outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug. The 3-wire grounding type plug will fit into a grounding type
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.
Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon
or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they
exit from the product.
Lightning
For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of
fire or electric shock.
A product and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the product and cart combination to overturn.
Object and Liquid Entry
Never push objects of any kind into this product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

iii
English
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
•When the power-supply cord or plug is damaged.
•If liquid has been spilled, or objects have fallen into the product.
•If the product has been exposed to rain or water.
•If the product does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the product to its normal operation.
•If the product has been dropped or damaged in any way.
•When the product exhibits a distinct change in performance - this indicates a need for service.
Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by
the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

iv
English
SA 1965
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated“dangerous voltage”within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SA 1966
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of
waste electrical and electronic equipment in the EU countries.
Please do not throw the equipment into the domestic refuse.
Please use the return and collection systems available in your country for the disposal of this
product.
CAUTION
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.

v
English
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY
CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE
ADEQUATE MEASURES.
FOR UNITED STATES USERS:
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
USER-INSTALLER
CAUTION:
Your authority to operate this FCC verified equipment could be voided if you make changes or modifications not
expressly approved by the party responsible for compliance to Part 15 of the FCC rules.
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY
CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE
ADEQUATE MEASURES.
WARNING:
Handling the cord on this product or cords associated with accessories sold with this product, will expose you
to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.

vi
English
BEFORE YOU USE
Be sure to use the power cord and the AC adapter attached to this product.
Be sure to use the power cord applicable to your local power specifications. If the product was sold in Japan,
use the AC adapter sold with the product with 100 VAC and 50 or 60 Hz.
When storing the product, do not leave it under direct sunlight or by heaters. It may become discolored,
deformed, or damaged.
Do not place this product in any humid, dusty, salt bearing wind, or vibrating locations.
Only use it under the following environmental conditions:
Temperature: 0°C - 40°C (32°F - 104°F)
Humidity: 30% - 85% (No condensation)
Do not move the camera column or the lamp column while your finger is being placed between the camera
column and the lamp column. Otherwise, your finger may be pinched and injured.
Use a soft, dry cloth for cleaning.
Do not use any volatile solvent such as thinner or benzene.
Do not point the camera lens directly at the sun. It may be damaged and you may not be able to take pictures.
Luminescent and Black Spots
There may be some pixels that do not properly operate due to the use of CMOS Area Image Sensors made-up
of many pixels.
Though luminescent or black spots may be found on the screen, it is a phenomenon peculiar to the CMOS Area
Image Sensors and is not a malfunction.
Follow the guidelines below to prevent the unit from dropping or overturning.
•Use the product on a stable base, desk, or table. Do not place the product on an unstable base or slanted
surface.
•Place or wire the unit to prevent the AC adapter cord or video cable from pulling.
Carry the product by holding the lower part of the main unit in both hands. Never hold the product by the
column or the camera head.
Pay careful attention when using (including setting-up and storing) or transferring the product to prevent the
camera head from receiving any shocks.
Do not look directly into the LED light. If you look directly into it at point-blank range, your eyes may be injured.
Some type of SD card/USB flash drive can be used.
Transfer the data from the SD card onto a device such as a PC to save a backup copy. Malfunction of the
product or repairs to it may cause the data saved in the SD card to be deleted.
If this product is used for longer than the warranty period, its performance and quality may deteriorate due
to the lifetime of its parts. To purchase replacement parts, consult the dealer from whom you purchased this
product or our branch/office near your location.

vii
English
Battery precautions:
•If this product is not going to be used for a long time, take the batteries out of the remote control.
•Do not use rechargeable batteries (e.g., Ni-Cd (NiCad batteries)).
•Do not use new and old batteries or batteries of different types together.
•Do not try to recharge or short-circuit the batteries.
•When disposing of used batteries, follow the instructions of your local government.
•Insert from one side and pay particular attention to the polarity (+/- directions).
•Be sure to use AAA batteries.
If any liquid from a battery leaks onto your skin or clothes, flush the area with clean water immediately. If it gets
into your eye, flush immediately with clean water and then contact a doctor.
Precautions regarding the remote control strap
To prevent unexpected accidents, please note the following points.
•This strap is for the remote control only and should not be used for any other purposes.
•Do not wrap the strap around parts of your body such as your neck, arm, or finger.
•Do not leave it within reach of small children.
•For safety reasons, the break-away section of the strap has been designed to separate if too much force is
applied. Therefore, please avoid any overly strenuous movements and do not apply excessive force.
•The strap length adjustment feature is designed to be simple and supportive. Excessive force or strenuous
movements may change the length.
•Do not use excessive force when adjusting the strap. This could damage the strap.
About using microphones
Connecting microphones other than electret condenser microphones (microphones for PCs and so on) could
cause a malfunction to occur. If you are concerned about this products operating noise when using the built-in
microphone, we recommend using an external microphone.
About the audio input port
When the audio source selection is set toexternal microphone, voltage is supplied to the audio input port
(microphone/line-in combined) . Do not connect any audio line-output devices such as a CD player.
Menu
Some functions may not be set or operated depending on the mode or the menu settings being used.
Record/Play
•Before recording an important scene, make sure to do a test recording to confirm that the camera is working
properly.
•The maximum file size of the continuous recording is 4GB. (The maximum recording length varies depending
on other factors such as resolution and recording quality.)
•Only movie files that are recorded with the unit can be playback.
•Only image files that are captured by the unit or converted by our software can be displayed.
•Be careful not to operate the zoom function or touch any buttons or switches during the recording. The
operation noise may be recorded.
Copyright
Do not commercially use or transfer movies or audio files recorded with the camera without the permission of
the copyright holder except for personal use.
Do not use the camera in locations where recording movies or audio files are prohibited.

2
English
BUNDLED
ITEMS
BASIC
OPERATIONS
ADVANCED
OPERATIONS
TROUBLE
SHOOTING
SPECIFICA-
TIONS
CONTENTS
IMPORTANT SAFEGUARDS.............................................................................................................. i
BEFORE YOU USE ...........................................................................................................................................vi
Contents ............................................................................................................................................ 2
1.BUNDLED ITEMS ........................................................................................................................... 4
2.BASIC OPERATIONS ..................................................................................................................... 5
2-1 Document Camera................................................................................................................................... 5
Part Names .............................................................................................................................................. 5
Operating panel....................................................................................................................................... 6
Rear panel and cable connection ........................................................................................................... 7
Side panel.............................................................................................................................................. 10
Moving Parts of the Document Camera................................................................................................. 11
2-2 Supplied Accessories............................................................................................................................ 12
Remote Control ...................................................................................................................................... 12
Preparation of Remote Control...................................................................................................... 12
Operation of the remote control .................................................................................................... 12
Receiving signal from the remote control ..................................................................................... 12
Remote Control Strap ............................................................................................................................ 13
Slide shooting adapter........................................................................................................................... 13
Image Mate CD-ROM ............................................................................................................................ 13
2-3 Shooting Images.................................................................................................................................... 14
Setting up the main unit ......................................................................................................................... 14
Connecting the AC cord ............................................................................................................... 14
Connecting the video cable.......................................................................................................... 15
Turning the power ON/OFF.................................................................................................................... 15
Adjusting the size .................................................................................................................................. 16
Adjusting the brightness........................................................................................................................ 17
Automatic brightness adjustment ................................................................................................. 17
Manual brightness adjustment...................................................................................................... 18
Turning the illumination ON/OFF ............................................................................................................ 19
Image selection ..................................................................................................................................... 20
2-4 Setting Changes .................................................................................................................................... 21
Changing a Setting ................................................................................................................................ 21
List of the Menus.................................................................................................................................... 21
Descriptions of Each Menu.................................................................................................................... 22
Main Unit ....................................................................................................................................... 22
Camera Controls [Second Layer] ................................................................................................. 22
Preferences [Second Layer] ......................................................................................................... 24
Support Function........................................................................................................................... 25
Suppport Function Setting ............................................................................................................ 26
Details of Each Function ........................................................................................................................ 28
Pause function .............................................................................................................................. 28
Highlight Function ......................................................................................................................... 28
Mask Function............................................................................................................................... 30
Scroll Function .............................................................................................................................. 31
Compare Picture Function ............................................................................................................ 32