
How to exchange the LIBERO WSI Sensor 1
Version 1 | Tutorial LIBERO WSI Sensor | elpro.com
READ OUT
AlarmOK Warning CONF
LOG
PDF
READOUT
1 sec.
> 20 sec.
ALKALINE
ALKALINE
ALKALINE
1
2
3
AlarmOK Warning CONF
LOG
SEARCH
1 sec.
ALKALINE
ALKALINE
ALKALINE
AlarmOK Warning CONF
LOG
ID WSI
LIBERO WSI
ID WSI
No
Con
Low
Bat
Run
ALKALINE
ALKALINE
LITHIUM
LITHIUM
1Read out LIBERO W and archive PDF report.
3Press pair buon on LIBERO WSI sensor
1 second within 30 seconds.
5Replace the 3 base baeries within
20 seconds – exchange one by one.
Note: Base uses
ALKALINE baeries.
Note: Sensor in fridges: ALKALINE baeries.
Sensor in freezers: LITHIUM baeries.
2Press pair buon for 1 second on base staon.
„SEARCH“ appears on the display
of base staon.
4Once the sensor has been successfully paired,
the sensor ID will appear on the display of
base staon for a few seconds, green LEDs will
blink again, you’ll hear a conrmaon tone.
6Insert the right baery type for the sensor.