ELPRO HD02-4K User manual

1
HDMI 4K2K Video Distribution Amplifier Rev.A 05/2015
ITEM NO.: HD02-4K, HD04-4K
HD02-4K, HD04-4K is a distribution amplifier for HDMI signals. Both of them support 3D and
resolution up to HD 4K2K resolution. It reclocks and equalizes the signal and distributes it
to two, four identical outputs.
HD02 1 Input 2 4K2K Output HDMI Distribution Amplifier
Connects up to 2 HDMI displays at the same time from a digital video source.
Support up to 3D, 4Kx2K HD , 12-Bit deep color.
Built in EDID learning/integration function.
Support LPCM 7.1、Dolby TrueHD、DTS-HD Master Audio.
Bandwidth: 25~340 Mhz.
HDMI 1.4a compliance, HDCP compliant.
DVI 1.0 compliance.
HD04 1 Input 4 Output 4K2K HDMI Distribution Amplifier
Identical to HD02-4K2K, but 4 HDMI displays at the same time from a digital
video source
Installation View:

2
PANEL VIEW:
HD02-4K
HD02-4KLED Indication：
：：
：
POWER Green on: Power on
INPUT Blue on: HDMI Input
OUTPUT1 Blue on HDMI output 1
OUTPUT2 Blue on HDMI output 2
HD02-4K DIP Switch instruction:
Switch 1~2 OFF: Default as EDID 1080P.
Switch 1 ON: Output 1 as EDID source.
Switch 2 ON: Output 2 as EDID source.
Switch 1~2 ON: EDID Analysis and re-generate a set of EDID for all screen resolution.
HD04-4K
HD02-4K LED Indication：
：：
：
POWER Green on: Power on
INPUT Blue on: HDMI Input connected
OUTPUT1 Blue on: HDMI output 1 connected
OUTPUT2 Blue on: HDMI output 2 connected
OUTPUT3 Blue on: HDMI output 3 connected
OUTPUT4 Blue on: HDMI output 4 connected
HD04-4K DIP Switch instruction:
DIP Switch 1~4 OFF: Default as EDID 1080P
Switch ON 1: Output 1 as EDID source.
Switch ON 2: Output 2 as EDID source.
Switch ON 3: Output 3 as EDID source.
Switch ON 4: Output 4 as EDID source.
Over 1 DIP switch ON: EDID analysis and re-generate a set of EDID for all screen resolution.
※Examples：Output 1,2 are different resolution screen, move the DIP switch 1, 2 at ON position,
press “ EDID COPY” button, then re-generate a new a set of EDID to support both two monitors
screen resolution.
DIP Switch for EDID
Select
DIP Switch for EDID
Select

3
EDID COPY Button Instruction：
：：
：
Press “EDID COPY” button, start to learning and writing EDID.
Remark：Over 2 port EDID learning, audio will only support two channel audio.
Console Port:
R232 interface connect to PC for firmware updated
pecification:
ITEM
NO. HD02-4K HD04-4K
Resolution 480p，576i，720p，1080i，1080p 60Hz，4K x 2K 30Hz
HDMI Connector Input: 1 port (HDMI Type A),
Output: 2 port ( HDMI Type A)
Input: 2 port (HDMI Type A),
Output: 4 port ( HDMI Type A)
Console RS232 x 1 (use for firmware update)
DIP Switch 25-225Mhz, support up to 12-Bit deep color
Function button Button x 1
Power Supply DC5V 2AMP
Temperature Operation: 0 to 60℃, Storage: -20 to 85℃, Humidity: up to 95%
DIMENSIONS mm 167 x 100.5 x 40
Weight g 445 455
Rev. A