3. Measurement Module ECOLOG-PRO 1NTR
2 AAA Alkaline or LiFe (lithium-iron) batteries
SAFETY INSTRUCTIONS!
Improper use or misuse of batteries may result in leakage of battery fluid or, in
the worst case, explosion and/or fire. Please note:
-Always choose the correct type of battery that best suits your intended
use (see 'Measurement range').
-So that battery status can be determined correctly, always insert new,
unused batteries when changing batteries.
-Never insert different types of batteries into the device at the same
time.
-All batteries should be replaced at the same time. Mixing old and new
batteries may cause the batteries to leak and damage the product.
-Make sure that the battery contacts and mating contacts in the device
are clean before inserting the batteries.
-Make sure that the batteries are inserted properly i.e. observe polarity
(+ and -).
-Remove the batteries if you are not going to use the product for a
longer period of time to avoid damage from leakage. Leaking or
damaged batteries can cause acid burns on skin contact. When handling
damaged batteries, you should wear protective gloves.
-Remove expired batteries immediately from the device.
-Do not disassemble batteries, do not short-circuit them and do not
throw them into fire. Never try to charge non-rechargeable batteries.
There is a danger of explosion!
-Keep batteries out of reach of children. Do not leave batteries lying
around as they may be swallowed by children or pets.
±1.0 °C in the range between -35.0 °C and -10.1 °C
±0.5 °C in the range between -10.0 °C and -0.1 °C
±0.4 °C in the range between 0.0 °C and +25.0 °C
±0.8 °C in the range between +25.1 °C and +50.0 °C
