Embedded Systems PT1000 Troubleshooting guide

Embedded Systems SIA, VAT No LV40003411103
47. Katolu str., Riga, LV 1003, LATVIA
Phone: [phone], fax: [phone], e-mail: sa[email protected]
Controller for PT1000 temperature sensors
PT1000 temperature sensor controller is used to connect up to 4
PT1000 or other resistive temperature sensors. The device acts like
extension module to LogicMachine2 series devices and is
interconnected via RS-485 port.
ENG - Data sheet
Issue date 5.03.2013
Application
Heating, cooling applications
Types of product
PT1000 input controller IO3PT
Standards and norms compliance
EMC: EN61000-6-1
EN61000-6-3
PCT Certificate
Technical data:
Power supply: 24V DC -20...+25%
Power consummation: 0.25W
Interface: RS-485 1
PT1000 inputs 4
Connections: Serial Clamp, 1.5mm2
Inputs Clamp, 1.5mm2
Operating elements LED 1 - Activity
Enclosure: Material: Polyamide
Color: Gray
Dimensions: 15(W)x90(H)x56(L) mm

Usage temperature: 0C ... +45C
Storage temperature: -15C ... +55C
Weight: 50g
Warranty: 2 years
Relative Humidity: 10...95 % without condensation
Caution
Security advice
The installation and assembly of electrical equipment may only be performed by skilled
electrician. The devices must not be used in any relation with equipment that supports,
directly or indirectly, human health or life or with application that can result danger of
people, animals or real value
Mounting advice
The devices are supplied in operational status. The cables connections included can be
clamped to the housing if required.
Electrical connection
The devices are constructed for the operation of protective low voltage (SELV). Grounding
of device is not needed. When switching the power supply on or off, power surges must be
avoided.

Quick startup guide
1) Mounting the device on DIN rail
2) Connect the RS-485 to the LogicMachine2 RS485 port
3) Connect 24V power supply to the device