EMBRON Hatteland Technology HD 15T22 MMD F Series User manual

Please visit www.hattelandtechnology.com for the latest electronic version of this manual.
HD 15T22 MMD-xxx-Fxxx - 15.0 inch Maritime Multi Display
HD 17T22 MMD-xxx-Fxxx - 17.0 inch Maritime Multi Display
HD 19T22 MMD-xxx-Fxxx - 19.0 inch Maritime Multi Display
HD 24T22 MMD-xxx-Fxxx - 24.0 inch Maritime Multi Display
HD 24T23 MMD-xxx-Fxxx - 24.0 inch Maritime Multi Display
HD 26T22 MMD-xxx-Fxxx - 25.54 inch Maritime Multi Display
HD 27T22 MMD-xxx-Fxxx - 27.0 inch Maritime Multi Display
Series X G2 - Maritime Multi Display (MMD) Models
USER MANUAL
User Manual MMD Series X G2
Updated: 01 Dec 2021 Doc Id: INB101192-1 (Rev 23)
Created: 363 Approved: 362
03 Oct 2022
(Rev 26)

Copyright © 2022 Hatteland Technology AS
Eikeskogvegen 52, N-5570 Aksdal, Norway.
All rights are reserved by Hatteland Technology AS. This information may not, in whole or in part, be
copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Technology AS. Review also:
www.hattelandtechnology.com/hubfs/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Technology AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Statement above last revised 31 Jul. 2019

3
IND100130-54
Contents.......................................................................................... 3
Contents of package ....................................................................................................9
General .......................................................................................... 11
IEC62368 policy - Introduction...................................................................................12
About this manual ......................................................................................................13
About Hatteland Technology ......................................................................................13
www.hattelandtechnology.com...................................................................................13
Contact Information....................................................................................................13
Maritime Multi Display (MMD) Generation 2 (G2) - Introduction ................................14
Touch screen products ...............................................................................................15
Product Labeling ........................................................................................................18
Installation..................................................................................... 23
General Installation Recommendations .....................................................................24
First Things First! .......................................................................................................24
Installation and mounting ...........................................................................................24
Installation limitations .................................................................................................25
Ergonomics ................................................................................................................27
Cables ........................................................................................................................28
Cable Entries & Connectors (Marked area) ........................................................... 28
Maximum Cable Length ......................................................................................... 28
Housing / Terminal Block Connector Overview ..........................................................29
Panel Cutout / Console Mounting Bracket Kit for 15, 17 and 19 inch ........................31
Panel Cutout / Console Mounting Bracket Kit for 24 and 27 inch ..............................33
Panel Cutout / Console Mounting Bracket Kit for 26 inch .........................................34
Mounting Bracket, Table / Desktop / Ceiling - 15, 17 and 19 inch..............................35
Mounting Bracket, Table / Desktop / Ceiling - 24, 26 and 27 inch..............................37
Physical Connections.................................................................................................39
Contents

Contents
4
IND100130-54
Operation....................................................................................... 43
User Controls .............................................................................................................44
On Screen Display (OSD) Menu Introduction ............................................................46
OSD Key Code (password) overview.........................................................................46
OSD Keycode / OSD Lock Mode...............................................................................47
OSD “Basic”, “Advanced” & “Service” Menu modes ..................................................48
OSD Visual Feedback (examples) .............................................................................48
OSD Menu Structure..................................................................................................49
Input Source Settings............................................................................................. 49
Image Settings ....................................................................................................... 49
Color Mode Settings .............................................................................................. 50
Multi-PIP Settings................................................................................................... 50
OSD Miscellaneous................................................................................................ 51
Management Settings ............................................................................................ 52
Service Settings ..................................................................................................... 53
On Screen Display (OSD) Menu Functions ...............................................................54
Operation Advanced (DDC/CI)..................................................... 81
Introduction ................................................................................................................82
Specications ............................................................................... 85
Specications - HD 15T22 MMD-xxx-Fxxx ................................................................86
Specications - HD 15T22 MMD-xxx-FHxx................................................................87
High Bright model................................................................................................... 87
Specications - HD 17T22 MMD-xxx-Fxxx ................................................................88
Specications - HD 17T22 MMD-xxx-FHxx................................................................89
High Bright model................................................................................................... 89
Specications - HD 19T22 MMD-xxx-Fxxx ................................................................90
Specications - HD 19T22 MMD-xxx-FHxx................................................................91
High Bright model................................................................................................... 91
Specications - HD 24T22 MMD-xxx-Fxxx ................................................................92
Specications - HD 24T22 MMD-xxx-FHxx................................................................93
High Bright model................................................................................................... 93
Specications - HD 24T23 MMD-xxx-Fxxx ................................................................94
Specications - HD 26T22 MMD-xxx-Fxxx ................................................................95
Specications - HD 27T22 MMD-xxx-Fxxx ................................................................96

Contents
5
IND100130-54
Technical Drawings ...................................................................... 97
Technical Drawings - HD 15T22 MMD-xxx-Fxxx........................................................98
Technical Drawings - HD 15T22 MMD-xxx-FHxx.......................................................99
High Bright model................................................................................................... 99
Technical Drawings - HD 17T22 MMD-xxx-Fxxx......................................................100
Technical Drawings - HD 17T22 MMD-xxx-FHxx.....................................................101
High Bright model................................................................................................. 101
Technical Drawings - HD 19T22 MMD-xxx-Fxxx......................................................102
HW00 Model ........................................................................................................ 103
Technical Drawings - HD 19T22 MMD-xxx-FHxx.....................................................104
High Bright model................................................................................................. 104
High Bright - HW00 model ................................................................................... 105
Technical Drawings - HD 24T22 MMD-xxx-Fxxx......................................................106
HW00 Model ........................................................................................................ 107
Technical Drawings - HD 24T22 MMD-xxx-FHxx.....................................................108
High Bright model................................................................................................. 108
High Bright - HW00 Model ................................................................................... 109
Technical Drawings - HD 24T23 MMD-xxx-Fxxx......................................................110
HW00 Model .........................................................................................................111
Technical Drawings - HD 26T22 MMD-xxx-Fxxx......................................................112
HW00 Model .........................................................................................................113
Technical Drawings - HD 27T22 MMD-xxx-Fxxx......................................................114
HW00 Model .........................................................................................................115
Technical Drawings - Accessories............................................ 117
Technical Drawings - HD TMB SX2-A1....................................................................118
Desktop/Table Mounting Bracket 15 inch..............................................................118
Technical Drawings - HD TMB SX2-A1....................................................................119
Desktop/Table Mounting Bracket 17 inch..............................................................119
Technical Drawings - HD TMB SX2-A1....................................................................120
Desktop/Table Mounting Bracket 19 inch............................................................. 120
Technical Drawings - HD TMB SX1-C1....................................................................121
Desktop/Table Mounting Bracket 24/26/27 inch................................................... 121
Desktop/Table Mounting Bracket 24 inch............................................................. 122
Desktop/Table Mounting Bracket 26 inch............................................................. 123
Technical Drawings - HD CMB SX2-A1 ...................................................................124
Console Mount Bracket........................................................................................ 124
Technical Drawings - HD CMB SX2-A1 ...................................................................125
Console Mount Kit 15 inch ................................................................................... 125
Technical Drawings - HD CMB SX2-A1 ...................................................................126
Console Mount Kit 17 inch ................................................................................... 126

Contents
6
IND100130-54
Technical Drawings - HD CMB SX2-A1 ...................................................................127
Console Mount Kit 19 inch ................................................................................... 127
Technical Drawings - HD CMB SX2-E1 ...................................................................128
Console Mount Kit 24 inch ................................................................................... 128
Console Mounting 24 inch ................................................................................... 129
P006801-1 Flush Mounting 24 inch ..................................................................... 130
Technical Drawings - HD CMB SX2-F1....................................................................131
Console Mount Kit 26 inch ................................................................................... 131
Console Mounting 26 inch ................................................................................... 132
P007084-1 Flush Mounting 26 inch ..................................................................... 133
Technical Drawings - HD CMB SX2-E1 ...................................................................134
Console Mount Kit 27 inch ................................................................................... 134
Console Mounting 27 inch ................................................................................... 135
P020721 - Flush Mounting 27 inch ...................................................................... 136
Technical Drawings - HD VED SX2-A1 ....................................................................137
VESA Adapter 15 inch.......................................................................................... 137
Technical Drawings - HD VED SX2-B1 ....................................................................138
VESA Adapter 17 inch.......................................................................................... 138
Technical Drawings - HD VED SX2-C1....................................................................139
VESA Adapter 19 inch.......................................................................................... 139
Technical Drawings - HD VED SX2-I1 .....................................................................140
VESA Adapter 24 inch.......................................................................................... 140
Technical Drawings - HD VED SX2-J1.....................................................................141
VESA Adapter 26 inch.......................................................................................... 141
Technical Drawings - HD VED SX2-K1 ....................................................................142
VESA Adapter 27 inch.......................................................................................... 142
Technical Drawings - JH 15TAP STD-C1.................................................................143
15 inch Series X to t 15 inch Series 1 Console Cutout ...................................... 143
Technical Drawings - JH 19TAP STD-C1.................................................................144
19 inch Series X to t 19 inch Series 1 Console Cutout ...................................... 144
Technical Drawings - HD 19TAP SX2-C2 ................................................................145
19 inch Series X to t 19 inch Series 2 Console Cutout ...................................... 145
Technical Drawings - JH 26TAP STD-A1 .................................................................147
26 inch Series X to t 26 inch Series 1 Console Cutout ...................................... 147
Technical Drawings - HD 26TAP SX1-A1.................................................................148
26 inch Series X to t 27 inch Series 1 Console Cutout ...................................... 148
Technical Drawings - HD 15COV SX1-A1................................................................149
UV Sun Cover (15 inch) ....................................................................................... 149
Technical Drawings - HD 17COV SX1-A1................................................................150
UV Sun Cover (17 inch) ...................................................................................... 150
Technical Drawings - HD 19COV SX1-A1................................................................151
UV Sun Cover (19 inch) ....................................................................................... 151

Contents
7
IND100130-54
Technical Drawings - HD 24COV SX1-A1................................................................152
UV Sun Cover (24 inch) ...................................................................................... 152
Technical Drawings - HD 26COV SX1-A1................................................................153
UV Sun Cover (26 inch) ....................................................................................... 153
Technical Drawings - HD 27COV SX1-A1................................................................154
UV Sun Cover (27 inch) ...................................................................................... 154
Technical Drawings - HD CAK SX2-A1 ....................................................................155
Front Console Mounting/Adapter Kit (24 inch)..................................................... 155
Technical Drawings - HD CAK SX2-B1 ....................................................................156
Front Console Mounting/Adapter Kit (27 inch)..................................................... 156
Technical Drawings - P006997-1 .............................................................................157
IP66 Panel Gasket (15 inch) ................................................................................ 157
Technical Drawings - P007130-1 .............................................................................158
IP66 Panel Gasket (17 inch) ................................................................................ 158
Technical Drawings - P007131-1 .............................................................................159
IP66 Panel Gasket (19 inch) ................................................................................ 159
Technical Drawings - P022211 ................................................................................160
IP66 Panel Gasket (24 inch) ................................................................................ 160
Technical Drawings - P007178.................................................................................161
IP66 Panel Gasket (26 inch) ................................................................................ 161
Technical Drawings - P018743.................................................................................162
IP66 Panel Gasket (27 inch) ................................................................................ 162
Technical Drawings - HD REM SX1-A1 ...................................................................163
For External Mounting.......................................................................................... 163
Appendixes ................................................................................. 165
UHF Interference Prevention ...................................................................................166
Pinout Assignments..................................................................................................168
IEC62368 policy for Hatteland Technology products ...............................................171
Basic Trouble-shooting.............................................................................................173
Declaration of Conformity.........................................................................................174
Return Of Goods Information...................................................................................175
General Terms and Conditions.................................................................................176
Pixel Defect Policy ...................................................................................................177
Parts and Recycling .................................................................................................178
Notes........................................................................................................................179
Revision History .......................................................................................................181

8
IND100130-2
This page left intentionally blank

9
IND100131-36
Contents of package
Item Description Illustration
HA-SDM-2M
1 x Standard DVI Signal Cable.
DVI-D 18+1P Male to DVI-D 18+1P Male Single Link - Length 2.0m
HA-VGA-2M-32
1 x Standard VGA Signal Cable.
DSUB 15P Male to DSUB 15P Male - Length 2.0m
TP52/TC01-1,8M
1 x Power Cable (Black) European Type F “Schuko” to IEC. Length 1.8m
Note: Included in package for models with AC input.
EUR TYPE F
IEC
TP11/TC01-1,8M
1 x Power Cable (Black) US Type B plug to IEC. Length 1.8m
Note: Included in package for models with AC input.
US TYPE B IEC
DVI-4
1 x DVI-I > RGB/VGA adapter
DVI-I 24+5P (Dual Link) Male to DSUB 15P Female
Test Report
HD CMB SX2-A1
Model Dependent:
2 pcs of Mounting Brackets for Console/Panel Mounting,
Anodized Aluminium/Stainless Steel.
The bracket kit is suitable for 15, 17 and 19 inch units and is EN60945 Tested (pending).
Suitable for panel thickness min: 2.0 [0.08”] to max: 50.00 [1.97”] mm [inch].
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 for DC Power In
2 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 / SCOM / Buzzer Module
Refer to “Conguring Housing / Terminal Block Connector” section for usage. Note: Location of module(s) may
di󰀨er between unit sizes
HD CMB SX2-E1
Model Dependent: Bracket Kit suitable for console/panel mounting which contains:
3 x Mounting Bracket for top, left and right side (P006858-1)
1 x Mounting Bracket for bottom side (terminal/connector plate area) (P020605)
6 x M5x16 Pan Head screw ISO 14583 Torx, A4 screws (145 050x016 A4T)
6 x M6 C-washers DIN6319 Steel (144 064x120x22)
2 x DIN 965 M5x16 Countersunk head screws with TX25, A4 STAINLESS STEEL (145 050x016 CA4)
Suitable only for 24 and 27 inch units and is EN60945 Tested.
HD CMB SX2-F1
Model Dependent: Bracket Kit suitable for console/panel mounting which contains:
4 x Mounting Bracket for top, left, right and bottom side (P007085-1)
8 x Panskrue M5x16 Torx, blank (145 050X016 ZT)
8 x M6 C-washers DIN6319 Steel (144 064x120x22)
Suitable only for 26 inch units and is EN60945 Tested.
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.

Contents of package
10
IND100131-36
Item Description Illustration
VSD100913-1
1 x Touch Screen Cable (Black) USB Type A to Type A.
Length Approx 2m.
Only included in package if model is equipped with factory mounted Touch Screen
For models (15-27 inch) an EPDM sealing gasket for IP66 console mount may be factory
pre-mounted / included with delivery if ordered. For High Bright models, it is pre-mounted by
factory default.
Details / Type number reference:
Surface: RAL9011, Glue: 3M9471LE, Thickness 2mm.
P006997-1 (15), P007130-1 (17), P007131-1 (19)
P022211 (24), P007178 (26), P018743 (27)
Package may also include:

11
IND100130-2
General

12
IND100078-81
General
IEC62368 policy - Introduction
Safety Instructions
Please read and understand the material in this manual in its entirety before doing any installation/servicing/upgrades.
Personnel who are allowed to do work on the unit is detailed in the “IEC62368 policy for Hatteland Technology
product” section later in this manual. Symbols pertaining to different personnel in regard to operations is described in
the user manual.
Based on requirements EN 62368-1:2014 and IEC 62368-1:2018
Authority Description
Children This equipment is not suitable for use in locations where children are likely to be present.
Ordinary person/
Sailor/End-User
Not allowed to open unit.
Not allowed to install the unit.
Not allowed to terminate/connect cables to the unit.
Instructed person Allowed to open hatches/latches which does not require tools, such as Disktrays.
Allowed to open "battery-hatch" to change the battery even if tools are required.
Allowed to install the unit.
Allowed to terminate/connect cables to the unit indoors.
Skilled person Allowed to open and disassemble the unit.
Allowed to install the unit.
Allowed to terminate/connect cables to the unit indoors and outdoors.
Allowed to terminate/connect earth/ground wire.
Note: Be aware that additional denition for “skilled person” may apply, country dependent.

13
Hatteland Technology AS
IND100077-1
General
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last updated
and revision date of this manual are shown both on the frontpage and also in the “Revision History” chapter. This
user manual is a standard/general manual that applies to all variations of its product family, i.e. deviation from actual
conguration may exist.
About Hatteland Technology
Hatteland Technology is the leading technology provider of specialized display and computer products, delivering high
quality, unique and customized solutions to the international maritime, naval and industrial markets.
The company represents innovation and quality to the system integrators worldwide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil
tested products. Our customer-oriented approach, technical knowledge and dedication to R&D, makes us a trusted
and preferred supplier of approved solutions, which are backed up by a strong service network.
www.hattelandtechnology.com
You will nd our website full of useful information to help you make an informed choice as to the right product for your
needs. You will nd detailed product descriptions and specications for the entire range on Displays, Computers,
Panel Computers and Military solutions as well as the range of supporting accessories. The site carries a wealth of
information regarding our product testing and approvals in addition to company contact information for our various
o󰀩ces around the world, the global service locations and the technical support centre, all ensuring the best possible
support wherever you, or your vessel, may be in the world.
Contact Information
Head oce, Aksdal / Norway:
Hatteland Technology AS
Eikeskogvegen 52
N-5570 Aksdal, Norway
Switchboard:
Tel: [phone]
[e-mail]
Sales oce, Frankfurt / Germany:
Hatteland Technology GmbH
Werner Heisenberg Strasse 2,
D-63263 Neu-Isenburg, Germany
Elke Freisens:
Tel: [phone]
Sales oce, Oslo / Norway:
Hatteland Technology AS
Strandveien 35
N-1366 Lysaker
Norway
Switchboard:
Tel: [phone]
[e-mail]
Sales oce, Aix-en-Provence / France:
Hatteland Technology SAS
Actimart- 1140, rue Ampère, CS 80544
13594 Aix-en-Provence, Cedex 3
France
Mehdi Bounoua (Sales Director Europe, Middle East & Africa):
Tel : [phone]
Sales oce, Vista / USA:
Hatteland Technology Inc
450 South Melrose Drive,
Suite #107
Vista, CA 92081
USA
Donna Pallonetti:
Tel: [phone]
Fax: [phone]
For an up-2-date list, please visit https://www.hattelandtechnology.com/contact

14
Displays Series X Generation 2 (G2)
IND101057-16
General
Maritime Multi Display (MMD) Generation 2 (G2) - Introduction
As a leading manufacturer of display and computer hardware for the maritime
segment, Hatteland Technology continuously gauges and responds to market
needs. Our commitment to develop specialized products for a multitude of onboard
ship systems continues with Series X. Their compact and sleek design allows them
to be be desk mount or console integrated. The design is modular, allowing for
common modules to be used in various models and combinations. Together these
design features bring about a range perfectly in synch to market cost expectations -
along with that, the performance and type approval always expected in all Hatteland
Technology products.
All sizes are available in display or panel computer formats, as well as various
performance specifications to choose from. There are standard base models
available which are listed in the following pages. The modules used in Series X,
are all qualified having undergone and passed our extensive test program, which
includes HALT testing. This means that the products are tested well outside the
requirements in EN60945 and E10.
The result is a more reliable product.
In 2017, advancements for the Series X generation two MMD (Maritime Multi
Displays) have been rolled out across the 15, 17, 19, 24, 26 and 27 inch models.
For users, there is an improved Glass Display Control™ (GDC), GDC backlight
uniformity and higher brightness for high luminance environments. For engineers
and installers, amongst the developments include improved serviceability, allowing
for better access to key components. There is also a new table/ceiling mounting
solution for the 15, 17 and 19 inch models.
• MULTITOUCH
• TYPE APPROVED
• ECDIS COMPLIANT
• IP22 REAR / IP66 FRONT
• SUPERIOR BONDING TECHNOLOGY
• MODULE BASED, TAILOR-MADE SYSTEMS MADE EASY!
• SUNLIGHT READABLE / HIGH BRIGHT VERSIONS AVAILABLE
• GLASS DISPLAY CONTROL™ (GDC), SOLID STATE MENU SYSTEM

15
Touchscreen
IND100110-12
Touch screen products
Introduction to products with touch screen (factory option)
Nearly all of our products with touch screen use Projected Capacitive Touch screen (PCTS), widely used with great
success on mobile phones and typical pad devices. PCTS can be equally e󰀨ective also for marine applications.
One of the advantages of PCTS is that it has features seen in both resistive and surface capacitive touch screen
technologies.
Multitouch is dened as the ability to recognize two or more simultaneous touch points. Using projected capacitive
technology allows us to create a more intuitive form of human-device interaction. Touch interface gestures, supported by
projected capacitive sensors, can simplify the interface and provide an intuitive user experience that goes beyond the
typical "button replacement" found in most simple touch interfaces.
Please review the appropriate Product Datasheet (in this manual) to determine if PCTS are supported and/or its
advanced features of additional touch methods (example Tactor and Active Stylus Pen) are available.
The technical benets of PCTS are:
- Very good optical performance (same as surface capacitive)
- Environmentally strong, the touch sensor is inside the product (better than both surface capacitive and resistive)
- Supports Multitouch (Newer Operating System (OS) required in most cases.
- Excellent readability - light transmission of up to 91% through a standard sensor
- Stability - no drift, therefore no recalibration is required
- Pointing device - works with gloved and ungloved finger
- Resistance to contamination - by harsh cleaning fluids and other noxious substances
- Communicates via USB to external computer or internally
Comparisons between general Touch Technologies used by Hatteland Technology:
Technology Optical Performance Gloves Water Durability Multitouch Stylus Objects (Tactor)
Analog Resistive -- ++ ++ - - - --
Surface Capacitive ++ -- - + - - --
Projected Capacitive ++ + + *++ ++ ++ ++
*Projected Capacitive (PCTS) / Water: Touch Screen Glass Surface can withstand drip and direct rain, but expect reduced capability, detection and
performance if units are exposed to these factors while powered. Hatteland Technology recommends protecting the unit from direct rain or drips if
critical touch operations are to be performed. Take necessary steps (if detected or suspected) within the installation environment to prevent accidental
touch gestures or presses not performed intentionally by a human operator.

16
Touch screen
IND100110-22
Touch Screen Products
Touch Screen Drivers
All units with Touch Screens are automatically detected by the Operating System via HID. There is no need to install
additional Third-Party touch screen drivers.
Microsoft® Windows® Svr Emb Std 2012 / Microsoft® Windows® 7 / Microsoft® Windows® 10 IoT:
- Please use Windows® Generic HID driver, no specic driver needed to use multi-touch.
- Alternative conguration available: See “Mouse Mode feature” below.
Mouse Mode feature:
The Multi-Touch screen interface can be congured to support mouse emulation to support certain legacy software.
If your system and its GUI (Graphical User Interface) experience lack of response to gadgets/buttons pressed via
touch screen, the package below might help. This feature works from Microsoft® Windows® XP and up.
Please note that Multi-touch will be disabled and replaced by Single Touch mode.
https://www.hattelandtechnology.com/support-archive-touch-screen-drivers?technology=&interface=&os=&os_version=&driver_id=111&product_id=
ref: https://www.hattelandtechnology.com/product-notications/new-touchscreen-solution-series-x-g2-mmd-15-17-19-inch
Linux
- Please use Linux Generic Touch driver.
Note: Kernel before 2.6.38: Single touch support.
Note: Kernel above 2.6.38: Multi touch support.
Note: For optimal graphical performance/hardware support with Skylake/Kaby Lake CPU’s on T22 MMC units, the
Linux Kernel 4.4 or later is required/recommended.
Note for Microsoft® Windows® XP Support:
- Multi-Touch Screen is not supported for this Operating System or Hatteland Technology products described in the
manual supports Windows XP. End of Life reference:
https://www.hattelandtechnology.com/product-notications/update-eol-microsoft-windows-xp-professional-for-embedded-systems-and-
microsoft-windows-xp-embedded

17
Touch Screen Products
Touch screen
IND100110-22
Touch Screen Calibration
If you experience any deviation in the touch input accuracy, consider re-calibrating the touch screen for your system.
Procedures below are for standard Microsoft® Windows® Operating System calibrate functions.
Example for Microsoft® Windows® 10 IoT:
1.Open Control Panel.
2.Click on Hardware and Sound.
3.Under “Tablet PC Settings,” click the Calibrate the screen for pen or touch input link.
4.Under “Display options,” select the display (if applicable).
5.Click the Calibrate button.
6.Select the Touch input option.
Example for Microsoft® Windows® 7:
1: Open Control Panel.
2: Open “Tablet PC Settings”.
3: Under “Display options,” select your display.
4: Click the Calibrate button and follow instructions.
5: To save settings, click “Apply” or “OK” on the “Table PC Settings” window.

18
IND100077-169
Product Labeling
Introduction
This section details the locations, content details and specications for factory mounted labels for all currently
available standard Hatteland Technology Maritime Multi Display (MMD) models. This information will in most cases
also apply for most Customized Models as well, but may di󰀨er based on customer requirements, in that case, please
refer to the customized User Manual (paper or electronic version, dependent on customer requirements).
Label Size and Types
ID Label Layout Description Specication
Please note that typenumber shown
above is a generic sample only. May
not reect products mentioned in this
manual. Please review actual product
S/N label.
Type : Serial Number Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Note: Text content of label will match specications
derived from Datasheet.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly dened as ISO/IEC 15417:2007.)
Type : Touch Screen Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Note: Content on label will vary based on Touch Screen type and/or Touch Screen
Controller. Label shown to the right is for illustration purposes only!
Type : Warranty Label
Size : 30mm wide x 23mm high (oval size)
Tamper-proof sticker with glue on
back.
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
Ordinary sticker with glue on
back.
Type : Handling Symbols Label
Size : 16mm wide x 8mm high (rectangle size)
Symbols indicate Cadmium Free product and proper
waste handling required.
FLEXcon®PHARMcal®V 400 F
WhiteTC-848V-23 TRACrite™150
Type : Shock Hazard Caution Label
Name : Label B
Size : 60mm wide x 20mm high (rectangle size)
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Rules specied in IEC62368-1:2018 annex L.8 and F.5. Applies for units with Dual/Multi-
Power inputs only (more than 1 Power Input).

19
Product Labeling
IND100077-169
Label Locations
Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below are seen
from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation
vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to t
properly. The arrangement of labels may be shifted/stacked di󰀨erently as it is based on factory options, such as; Touch
Screen, but they will be grouped together where possible.
Label Positions Notes Applies for Product Range
Warranty label covers screw.
Labels placed on rear.
HD 15T22 MMD-xxx-Fxxx
Warranty label covers screw.
Labels placed on rear.
HD 17T22 MMD-xxx-Fxxx
Warranty label covers screw.
Labels placed on rear.
HD 19T22 MMD-xxx-Fxxx

20
Product Labeling
IND100077-169
Warranty label covers screw.
Labels placed on rear.
HD 24T22 MMD-xxx-Fxxx
HD 24T23 MMD-xxx-Fxxx
Warranty label covers screw.
Labels placed on rear.
HD 26T22 MMD-xxx-Fxxx
Warranty label covers screw.
Labels placed on rear.
HD 27T22 MMD-xxx-Fxxx