emerio FN-114894.2 User manual

FN-114894.2
Stand fan (EN)
Stand Ventilator (DE)
Ventilateur sur pied (FR)
Golvfläkt (SE)
Ventilator op standaard (NL)
Lattiatuuletin (FI)
Podstawka wentylatora (PL)

- 1 -
Content –Inhalt –Teneur –Innehåll –Inhoud –Pitoisuus –Treść
Instruction manual –English........................................................................................- 2 -
Bedienungsanleitung –German...................................................................................- 7 -
Mode d’emploi – French............................................................................................- 13 -
Bruksanvisning –Swedish ..........................................................................................- 19 -
Gebruiksaanwijzing –Dutch.......................................................................................- 24 -
Käyttöopas –Finnish ..................................................................................................- 30 -
Instrukcja obsługi – Polish..........................................................................................- 35 -

- 2 -
Instruction manual –English
SAFETY INSTRUCTIONS
Before use make sure to read all of the below instructions in
order to avoid injury or damage, and to get the best results
from the appliance. Make sure to keep this manual in a safe
place. If you give or transfer this appliance to someone else
make sure to also include this manual.
In case of damage caused by user failing to follow the
instructions in this manual the warranty will be void. The
manufacturer/importer accepts no liability for damages
caused by failure to follow the manual, a negligent use or use
not in accordance with the requirements of this manual.
1. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
2. Children shall not play with the appliance.
3. Cleaning and user maintenance shall not be made by
children without supervision.
4. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
5. Before inserting the plug into the mains socket, please check
that the voltage and frequency comply with the
specifications on the rating label.
6. Disconnect the mains plug from the socket when the
appliance is not in use and before cleaning.
7. Ensure that the mains cable is not hung over sharp edges
and keep it away from hot objects and open flames.
8. Do not immerse the appliance or the mains plug in water or
other liquids. There is danger to life due to electric shock!
9. To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.

- 3 -
10. Do not touch the appliance if it falls into water. Remove the
plug from its socket, turn off the appliance and send it to an
authorized service center for repair.
11. Do not plug or unplug the appliance from the electrical
outlet with a wet hand.
12. Never attempt to open the housing of the appliance, or to
repair the appliance yourself. This could cause electric shock.
13. Never leave the appliance unattended during use.
14. This appliance is not designed for commercial use.
15. Do not use the appliance for other than intended use.
16. Do not wind the cord around the appliance and do not bend
it.
17. Keep the appliance away from damp, and protect from
splashes.
18. Use the appliance on a flat, dry and heat resistant surface.
19. Do not store or operate the appliance in the open air.
20. Keep the appliance in a dry place for storage, inaccessible to
children (in its packaging).
21. Never put fingers or any other objects through the fan
guards when the fan is running.
22. Never operate the product without the fan guards in place,
as serious personal injury may result.
23. The appliance must be assembled completely before use.
24. Watch out for long hair! It can be caught in the fan owing to
the air turbulence.
25. Do not point the air flow at people for a long time.
26. Ensure that the fan is switched off from the supply mains
before removing the guard.

- 4 -
FN-114894.2 EN
PARTS DESCRIPTION
1. Clamping ring
2. Front guard
3. Blade fastening screw
4. Fan blade
5. Guard fastening screw
6. Rear guard
7. Motor shaft
8. Shaft pin
9. Indication screen
10. Control panel
11. Fastening screw
12. Height adjustment pipe
13. Fasten set
14. Standing shaft
15. Standing base
16. Washer
17. Base locking screw
18. Remote control
Control panel illustration
a) “ ”: On/off button
b) “ ”: Speed button
c) “ ”: Timer button
d) “ ”: Swing button
Remote control
This unit has a remote control. One piece of CR2025 battery will be provided with the remote control. Before
starting to use the remote control, remove the plastic protection from the battery. If you want to change the
battery, please refer to the instruction behind the remote control. If it is not in use for a long time, please take the
battery out of the remote control. The functions of the remote control buttons are the same as the functions of
the buttons on the control panel.
ASSEMBLING INSTRUCTIONS
1. Attach the standing shaft onto the standing base. Place the washer and base locking screw. Rotate the base
locking screw to fix the standing shaft firmly.
2. Loosen the fasten set and pull out the height adjustment pipe. Tighten the fasten set.
3. Link the fan main body and the height adjustment pipe together by the fastening screw and then fix them.
4. Remove the blade fastening screw and guard fastening screw from the motor shaft spindle.
5. Fit the rear guard by positioning with the location pins. Secure the guard onto the motor body with the guard
fastening screw.
6. Place the fan blade onto the motor shaft by matching the slot with the shaft pin. Fix the blade by tightening
the blade fastening screw in a counter-clockwise direction. Check that the fan blade can rotate freely by
turning it with your hand.