- 6 -
OPERATION
1. On/off: Connect the appliance to a suitable power source. Press the on/off button to turn on the appliance,
the display panel will be illuminated. Press the button again to turn off the appliance. The appliance will be in
standby mode.
1) If the unit is turned on at the first time, it will work with the following presetting:
Speed: level 1 / Mode: normal / Swing: off / Timer: off
2) In standby mode, press on/off button, the unit will resume former settings; except the functions of natural
mode, sleeping mode and timer. But, if you pull out the plug from the socket, the former settings will all
be lost.
2. Speed: Press the speed button to adjust the fan speed. 7 speed levels are available from low to high. The
indicator light of the speed bar will illuminate accordingly on the display panel.
Note: Wind direction can be adjusted up and down by the louver in the air outlet.
3. Timer: Press the timer button to set your desired working time from “01h” to “12h”. When the set time has
elapsed, the fan will be off and under standby condition.
4. Mode: Press the mode button to choose the functions from normal → Natural → Sleeping → normal …
(Repeating). You can press the speed button to choose your desired speed level.
1) Normal mode: under this mode, no display will be on. The motor works with the preset speed.
2) Natural mode: under this mode, the display of is on. The appliance runs according to the natural
mode program, generating softer and more comfortable air volume. You feel like the wind from the nature.
3) Sleeping mode: under this mode, the display of is on. The appliance runs according to the sleeping
mode program. Air volume will weaken with the decrease of body temperature when you fall asleep,
which will protect you from catching cold.
5. Swing: Press the swing button to control the oscillation function on and off. The display of will be on and
off accordingly.
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT or may cause
electric shock or product damage. Dust may accumulate on the rear grille cover, which would affect fan
performance. Thus, it is suggested to clean the fan at least once per month. Unplug the unit and wait until the fan
stops running before cleaning. Use normal detergent and soft brush instead of chemical cleaner when cleaning
the product.
1. Wipe the surface of the appliance with a damp cloth. Do not spray water to
the machine directly. Do not clean the appliance with corrosive or solvent
detergent. After cleaning, make sure the appliance is dry completely before
connecting to the power supply.
2. Press the release tabs of the rear grille cover to detach it from the appliance.
Remove the filter (A) from the rear grille cover (B). Use a neutral cleaner and
a soft brush to clean the cover and filter. Rinse with clear water thoroughly.
Dry before putting back.
3. If the appliance will not be used for a long period of time, unplug the power
cord and pack the product well to avoid dust accumulating into the fan body.
Store the product in a dry and ventilated place.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 15W