Emerson SA1-2 Series Installation instructions

1(5)
Emerson Automation Solutions | AVENTICS
cad_re-ass_sak-ckp-1_v02.docx
CAD Re-assembly instructions
for our neutral CAD file formats
Product: Stopper, Series SA1-2
Parts assembled: 2 (5)
Consists of following parts: 7 pcs
Parts assembled: 2 (5)

2(5)
Emerson Automation Solutions | AVENTICS
cad_re-ass_sak-ckp-1_v02.docx
Mate instructions, step by step for easy handling
I. Assemble main parts
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 1(2): Insert
Constraint 2(2): Mate
1 - Assemble Stop Holder & Screw 1st Parts assembled: 2(7)
Constraint 1(2): Insert
Constraint 2(2): Mate
2 –Assemble Screw 2nd Parts assembled: 3(7)

3(5)
Emerson Automation Solutions | AVENTICS
cad_re-ass_sak-ckp-1_v02.docx
Mate instructions, step by step for easy handling
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 1(2): Insert
Constraint 2(2): Mate
3 - Assemble Ring 1st.Parts assembled: 4(7)
Constraint 1(2): Insert
Constraint 2(2): Mate
4- Assemble Ring 2nd Parts assembled: 5(7)

4(5)
Emerson Automation Solutions | AVENTICS
cad_re-ass_sak-ckp-1_v02.docx
Mate instructions, step by step for easy handling
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 2(3) : Insert
Constraint 1(2): Insert
Constraint 2(2): Mate
5 - Assemble Adjust screw 1st Parts assembled: 6(7)
Constraint 1(2): Insert
Constraint 2(2): Mate
6 - Assemble Adjust screw 2nd Parts assembled: 7(7)

5(5)
Emerson Automation Solutions | AVENTICS
cad_re-ass_sak-ckp-1_v02.docx
Mate instructions, step by step for easy handling
II. Assemble sub parts: Adjust screw
III.
IV.
V.
VI.
VII.
VIII.
IX.
X.
XI.
XII.
XIII.
XIV.
XV.
XVI.
XVII.
XVIII.
Constraint 2(3) : Insert
Constraint 3(3) : Mate
Constraint 1(2): Insert
Constraint 2(2): Align (“X”mm)
Note:
* The X dimension is free adjusted upon using
purposes
1 - Assemble Screw & Nut Parts assembled: 2(2)
Consists of following parts: 2 pcs
Parts assembled: 2 (5)