Emerson Bristol Helicoid Gauges Operating and safety instructions

Product Overview
Helicoidov1a
June 25, 2007 - Page 1
Bristol®Helicoid Gauges
Emerson Process Management
Remote Automation Solutions
Watertown, CT 06795 USA T 1 [phone]
Mississauga, ON 06795 Canada T 1 [phone]
Worcester WR3 8YB UK T 44 (1) 905-856950
Website: www.EmersonProcess.com/Remote
© 2007 Remote Automation Solutions, division of Emerson Process Management. All rights reserved.
Bristol, Inc., Bristol Babcock Ltd, Bristol Canada, BBI SA de CV and the Flow Computer Division , are wholly owned subsidiaries of Emerson Electric Co. doing business as Remote Automation
Solutions (“RAS”), a division of Emerson Process Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow and Helicoid are trademarks of RAS. AMS, PlantWeb and the
PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a trademark and service mark of the Emerson Electric Co. All other marks are property of their respective owners.
The contents of this publication are presented for informational purposes only. While every effort has been made to ensure informational accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their use or applicability. RAS reserves the right to modify or improve the designs or specications of such
products at any time without notice. All sales are governed by RAS’ terms and conditions which are available upon request. RAS does not assume responsibility for the selection, use or mainte-
nance of any product. Responsibility for proper selection, use and maintenance of any RAS product remains solely with the purchaser and end-user.
Features
Exclusive Cam & Roller Movement
3-1/2” through 8-1/2” sizes and 4-1/2” Process
Stainless Steel, Aluminum & Polyester Cases
Alloy Steel, 316 Stainless Steel, and Monel Bourdon
Tube
English, Metric, & Dual Scale Dials
Related accessories such as snubbers, siphons,
diaphragm seals
4-1/2” or 6” Indicating Pressure Switch
The Bristol® Helicoid Cam & Roller movement, from
Emerson Process Management, has no gears or teeth
to wear out. Worn teeth, spurs, or pinions associated
with geared movements will quickly render your gauge
useless after a very short cycle life. Our Cam & Roller
movement has been used and tested for millions of
cycles without failure. Gauge failure is downtime!
Downtime is lost production. And lost production
equals lost $$$$$$!
•
•
•
•
•
•
•Helicoid gauges exclusive cam
& roller movement