Emerson Centellis 2000 Quick start guide

Embedded Computing for
Business-Critical ContinuityTM
Centellis 2000 User Card-10GE
Installation and Use
P/N: 6806800H33B
December 2012

© 2012 Emerson
All rights reserved.
Trademarks
Emerson, Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service
marks of Emerson Electric Co. © 2008 Emerson Electric Co. All other product or service names are the property of their respective
owners.
Intel®is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.
Java™and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
Microsoft®, Windows®and Windows Me®are registered trademarks of Microsoft Corporation; and Windows XP™is a trademark of
Microsoft Corporation.
PICMG®, CompactPCI®, AdvancedTCA™and the PICMG, CompactPCI and AdvancedTCA logos are registered trademarks of the PCI
Industrial Computer Manufacturers Group.
UNIX®is a registered trademark of The Open Group in the United States and other countries.
Notice
While reasonable efforts have been made to assure the accuracy of this document, Emerson assumes no liability resulting from any
omissions in this document, or fromthe use ofthe information obtained therein. Emerson reserves the right to revise this document
and to make changes from time to time in the content hereof without obligation of Emerson to notify any person of such revision or
changes.
Electronic versions of this material may be read online, downloaded for personal use, or referenced in another document as a URL to
a Emerson website. The text itself may not be published commercially in print or electronic form, edited, translated, or otherwise
altered without the permission of Emerson,
It is possible that this publication may contain reference to or information about Emerson products (machines and programs),
programming, or services that are not available in your country. Such references or information must not be construed to mean that
Emerson intends to announce such Emerson products, programming, or services in your country.
Limited and Restricted Rights Legend
If the documentation contained herein is supplied, directly or indirectly, to the U.S. Government, the following notice shall apply
unless otherwise agreed to in writing by Emerson.
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (b)(3) of the Rights in
Technical Data clause at DFARS 252.227-7013 (Nov. 1995) and of the Rights in Noncommercial Computer Software and
Documentation clause at DFARS 252.227-7014 (Jun. 1995).
Contact Address
Emerson Network Power - Embedded Computing
Lilienthalstr. 15
85579 Neubiberg/Munich
Germany

Contents
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 3
About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1.2 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
1.3 Standard Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1.4 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
2 Centellis 2000 User Card-10GE Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2.2 Payload Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.2.1 Ethernet Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.3 IPMC Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2.3.1 IPMB0 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.3.2 IPMC Standard Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.4 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.4.1 Onboard and External Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2.4.2 Power Supply Holdup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.5 Installing and Removing SFP/ SFP+ Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
2.5.1 Installing an SFP/SFP+ Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
2.5.2 Removing an SFP/SFP+ Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2.6 Frame Ground and ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3 Controls, Indicators and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1 Face Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1.1 LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
3.1.2 Ethernet Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
3.2 Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
4 Board Exchange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.2 Before Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
4.2.1 Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Contents

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
Contents
4
Contents
Contents
4.2.1.1 Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
4.2.1.2 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
4.2.1.3 Required Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.2.2 Unpacking and Inspecting the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4.3 Installing the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
4.4 Removing the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
A Related Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
A.1 Emerson Network Power - Embedded Computing Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
A.2 Related Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Safety Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Sicherheitshinweise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

List of Tables
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 5
Table 1-1 Standard Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 1-2 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 3-1 Face Plate LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Table 3-2 Centellis 2000 User Card-10GE Specific Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Table 4-1 Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Table 4-2 DC Board Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Table A-1 Emerson Network Power - Embedded Computing Publications . . . . . . . . . . . . . . . . . . . 43
Table A-2 Related Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
6
List of Tables

List of Figures
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 7
Figure 1-1 Functional Block Diagram of the Centellis 2000 Chassis . . . . . . . . . . . . . . . . . . . . . . 16
Figure 1-2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 1-3 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 2-1 Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 3-1 Face Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
8
List of Figures

Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 9
About this Manual
Overview of Contents
This manual is intended for users qualified in electronics or electrical engineering. Users must
have a working understanding of AdvancedTCA and telecommunications. This manual
provides the information you need to install, access and operate the Centellis 2000 User Card-
10GE. Additionally you need the System Management Interface Based on HPI-B (Centellis CO
31kX/4100/2000) User’s Guide to adopt the hardware platform interface.
The manual contains the following chapters and appendix:
zAbout this Manual on page 9, lists all conventions and abbreviations used in this manual and
outlines the revision history.
zIntroduction on page 15, gives an overview of the product.
zCentellis 2000 User Card-10GE Hardware on page 23, provides detailed hardware
information of the product.
zControls, Indicators and Connectors on page 31, describes external interfaces of the
product, this includes connectors and LEDs.
zBoard Exchange on page 35, describes the exchange prerequisites and procedures.
zRelated Documentation on page 43, lists related documentation and specifications.
zSafety Notes on page 45, describes the safety information which has to be regarded.
zSicherheitshinweise on page 49, provides a German translation of the chapter "Safety
Notes".
Abbreviations
This document uses the following abbreviations:
Abbreviation Definition
AdvancedTCA
ATCA
Advanced Telecommunications Computing Architecture
AMC Advanced Mezzanine Card
API Application Programming Interface
BT Block Transfer

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
About this Manual
10
About this Manual
CGE Carrier Grade Edition
CO Central Office
CPCI Compact Peripheral Component Interconnect
CPU Central Processing Unit
DC Direct Current
ECC Embedded Communications Computing
EMC Electromagnetic Compatibility
EMI Electromagnetic Immunity
EMV Elektromagnetische Vertraeglichkeit
EN European Norm
ESD Electrostatic Sensitive Device
FCC Federal Communications Commission
FPGA Field-Programmable Gate Array
FRU Field Replacable Unit
FI Fabric Interface
GbE Gigabit Ethernet
GmbH Gesellschaft mit beschraenkter Haftung
GND Ground
HPI Hardware Platform Interface
IEC International Electric Code
IP Internet Protocol
IPM Intelligent Platform Management
IPMB Intelligent Platform Management Bus
IPMC Intelligent Platform Management Controller
IPMI Intelligent Platform Management Interface
LED Light Emitting Diode
LVDS Low Voltage Differential Signal
MAC Media Access Control
Abbreviation Definition

About this Manual
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 11
MIB Management Information Base
MMC Mezzanine Management Controller
MO Managed Object
NEBS Network Equipment Building System
OID Object Identifier
OOB Out-of-Band
OOS Out-Of-Service
OS Operating System
PCB Printed Circuit Board
PEM Power Entry Module
PICMG PCI Industrial Computer Manufacturers Group
RoHS Restriction of the use of Certain Hazardous Substances
RTM Rear Transition Module
SAF Software Availability Forum
SELV Safety Extra Low Voltages
ShM Shelf Manager
SFP Small Form-factor Pluggable
UL Underwriters Laboratory Inc.
VCCI Voluntary Control Council for Interference
VIP Virtual IP Address
Abbreviation Definition

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
About this Manual
12
About this Manual
Conventions
The following table describes the conventions used throughout this manual.
Notation Description
0x00000000 Typical notation for hexadecimal numbers (digits are
0 through F), for example used for addresses and
offsets
0b0000 Same for binary numbers (digits are 0 and 1)
bold Used to emphasize a word
Screen Usedforon-screenoutput andcoderelatedelements
or commands in body text
Courier + Bold Used to characterize user input and to separate it
from system output
Reference Used for references and for table and figure
descriptions
File > Exit Notation for selecting a submenu
<text> Notation for variables and keys
[text] Notation for software buttons to click on the screen
and parameter description
... Repeated item for example node 1, node 2, ..., node
12
.
.
.
Omission of information from example/command
that is not necessary at the time being
.. Ranges, for example: 0..4 means one of the integers
0,1,2,3, and 4 (used in registers)
|LogicalOR

About this Manual
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 13
Summary of Changes
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury
Indicates a hazardous situation which, if not avoided,
may result in minor or moderate injury
Indicates a property damage message
No danger encountered. Pay attention to important
information
Notation Description
Order No. Date Description
6806800H33A September 2010 First edition
6806800H33B December 2012 Updated Chapter 1, Standard Compliances, on page 19.

Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
About this Manual
14
About this Manual

Chapter 1
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 15
Introduction
1.1 Overview
The Centellis 2000 User Card is an independent Field Replaceable Unit (FRU) for the Centellis
2000 system. It hosts an PHY for converting a 10 Gbps XAUI Ethernet signal to a Small Form-
factor Pluggable (SFP) connector on the face plate. It has independent power supply derived
from the 48 V and a 3.3V management supply. It supports full management access via two
IPMBs and accesses one Fabric Interface (FI) of the corresponding AdvancedTCA blade.
The Centellis 2000 User Card-10GE module is intended to be used in a CENT-2000 chassis. The
module when installed in the dedicated User Card slot provides uplink connectivity from the
payload Ethernet fabric channel.
Figure 1-1 shows the functional block diagram of the Centellis 2000 chassis including the two
10G User Cards in the lower part of the figure.

Introduction
Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
16
Each 10G User Card is connected through the chassis backplane to fabric channel 2 of one front
board via 4x bidirectional Low Voltage Differential Signal (LVDS) signals. The LVDS signals
provide the XAUI 10G Ethernet interface which is converted by the 10G User Card to a serial
10G Ethernet interface on an SFP+ module.
Figure 1-1 Functional Block Diagram of the Centellis 2000 Chassis

Introduction
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 17
1.2 Hardware
The following figure gives an overview about the main parts of the board.
Figure 1-2 Overview

Introduction
Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
18
Functional Characteristics:
zTransceiver
— BCM8706 10GE Serial-to-XAUI 10GBASE-LRM transceiver
— Compliant to IEEE 802.3ae and IEEE 802.3aq
Figure 1-3 Block Diagram

Introduction
Centellis 2000 User Card-10GE Installation and Use (6806800H33B) 19
zClock
— 156.25MHz clock oscillator and SY58013UMG clock driver for BCM8706s differential
156.25MHz reference clock
zSFP+
SFP+ modules
— Optical MMF module for distances up to 300m
— Copper cable assembly for distances up to 25m
zIPMI
— PICMG 3.1 compliant IPMI subsystem
zPower
— Dual -48V sourced via backplane
— Dual +3.3V management power sourced via backplane
— Local power generation of +5.0V, +3.3V and +1.0V
zPower on reset generation and power supervision
1.3 Standard Compliances
The Centellis 2000 User Card-10GE, when installed in a compliant chassis, meets the following
standards:
Table 1-1 Standard Compliances
Standard Description
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1
Legal safety requirements

Introduction
Centellis 2000 User Card-10GE Installation and Use (6806800H33B)
20
For Declaration of Conformity, refer Centellis 2000 User Card Declaration of Conformity.
1.4 Ordering Information
The table below shows the board's ordering information.
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
Industry Canada ICES-003
VCCI Japan
AS/NZS CISPR 22
EN 300 386
NEBS Standard GR-1089 CORE
Legal EMC requirements on system level (predefined
Emerson system)
ANSI/IPC-A610 Rev.C Class 2
ANSI/IPC-7711
ANSI/IPC-7721
ANSI-J-001...003
Manufacturing requirements
NEBS Standard GR-63-CORE
ETSI EN 300 019 series
Environmental requirements
PICMG 3.0 R3.0 Defines mechanics, blade dimensions, power distribution,
power and data connectors, and system management
Table 1-1 Standard Compliances (continued)
Standard Description
The product has been designed to meet the directive on the restriction of the use of certain
hazardous substances in electrical and electronic equipment (RoHS) Directive 2011/65/EU.