Emerson Liebert itON BX User manual

The UPS has four battery backup outlets that provide power
when the UPS operates on battery. (see Figure 2 on next page)
Step 5 Connect the Loads

5 minutes
4-6 hours to 90%
12V x 7 Ah x 2
32 to 104 (0 to 40)
-4 to 122 (-20 to 50)
0 90%, non-condensing
Stepped sinewave
+10% & 10%
230VAC
50Hz (auto sensing)
162-290 VAC
5.75 x 13.8 x 6.3 (146 x 350 x 160)
17.63 (8.0)
1000/600
Capacity (VA/W)
Net Weight, lb. (kg)
Dimensions W x D x H, in. (mm)
On-Line Input Voltage
On-Line Frequency
Output Voltage (Utility Power Normal)
Output Voltage (Battery Operation)
On-Battery Wave Form
Battery Type VDC x Ah x Quantity
Typical Recharge Time
Battery Run Time* Half Load
Operating Temperature,
Storage Temperature,
Operating /Storage Relative Humidity