Emerson Rosemount G1 User manual
Quick Start Guide
00825-0100-4106, Rev 02
August 2020
Rosemount™ G1 Welding Mandrel
1 About this guide
This guide provides instructions for mounting the welding mandrel
(part number FB-6041).
1.1 Safety instructions
Follow these guidelines to ensure safe use and extend the life of the
product.
CAUTION
•Read this document before using the product and keep it during
the entire service life.
•The product must be suitable for the corresponding applications
and environmental conditions without any restrictions.
•Only use the product for its intended purpose.
•If the operating instructions or the technical data are not adhered
to, personal injury and/or damage to property might occur.
•The manufacturer assumes no liability or warranty for any
consequences caused by tampering with the product or incorrect
use by the operator.
•Installation, electrical connection, set-up, operation and
maintenance of the product must be carried out by qualified
personnel.
2
2 Mount the welding mandrel
The welding mandrel absorbs heat and can prevent warping during
installation of the weld-in adapter.
Prerequisites
CAUTION
While welding, the weld-in adapter and mandrel can get extremely
hot. To prevent burns, allow the components to cool before
disassembling the weld-in adapter and mandrel assembly.
Procedure
1. Hand-tighten the weld-in adapter.
2. Insert the bolt through mandrel opening.
3
3. Mount the counter plate.
4. Tighten the nut.
16 mm
Postrequisites
1. Weld the weld-in adapter according to instructions found in
the Rosemount™ Hygienic Process Connection Adapter Quick
Start Guide for Weld-in adapter.
2. Allow the weld and mandrel components to cool, then remove
the mandrel components from the weld-in adapter.
4
5
6
7
*00825-0100-4106*
Quick Start Guide
00825-0100-4106, Rev. 02
August 2020
Emerson Automation Solutions
6021 Innovation Blvd.
Shakopee, MN 55379, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
North America Regional Office
Emerson Automation Solutions
8200 Market Blvd.
Chanhassen, MN 55317, USA
+1 800 999 9307 or +1 952 906 8888
+1 952 949 7001
Linkedin.com/company/Emerson-Automation-Solutions
Twitter.com/Rosemount_News
Facebook.com/Rosemount
Youtube.com/user/RosemountMeasurement
©2020 Emerson. All rights reserved.
Emerson Terms and Conditions of Sale are available upon request. The Emerson logo is a
trademark and service mark of Emerson Electric Co. Rosemount is a mark of one of the
Emerson family of companies. All other marks are the property of their respective owners.
Table of contents
