EMPORIA EUPHORIA V50 User manual

Fig.1
Fig.3
Fig.2
Fig.4 Fig.5
INSERTING A SIM CARD
Fig.1: Remove the battery cover.
Fig.2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.
INSERTING AND CHARGING THE BATTERY
Fig.3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig.4: Put the battery cover on the phone and press it down.
Fig.5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.
EMPORIA EMERGENCY CALL FUNCTION
You can save up to ve emergency numbers (family members,
friends and official institutions).
¡In an emergency press and hold the emergency button on
the back of the phone. (This works even when the keypad is
locked.)
¡The ve preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the rst
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of ve numbers
a maximum of three times.)
¡At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, press and hold for
3 sec. or turn your device o completely using and then
turn it on again.
¡To cancel the emergency call, press and hold .
¡During the emergency call, a warning tone will sound contin-
uously, to alert anyone nearby and the person being called.
¡If you do not have any emergency numbers saved, have no
credit on your prepaid phone card or are connected
to a foreign network without permission (e.g. roaming
is not activated), 112 will be dialled when you press the
emergency button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.
Adding/editing emergency numbers:
In the Settings menu _Emergency numbers
_Add emergency number
_Select an entry (e.g. EmNo. 1) by pressing
_Select OK by pressing
_Select Private or Help organisation
_Select a contact
Activating the emergency button:
In the Settings menu __Emergency button _O n / O ff
Pre alarm:
The pre alarm is a warning tone that sounds for
ten seconds and alerts anyone nearby to the emergency.
After this, the emergency call sequence starts.
In the Settings menu _Emergency numbers
_Pre alarm _O n / O ff
SETTINGS
In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predened settings (prole).
¡Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Conrmation tone,
Emergency tone
¡Silent/Sleep mode prole
Visual notications only (torch LED ashes, notications on
the display), no ringtone, no vibration function
¡Meeting/Theater mode prole
Visual notications (torch LED ashes, notications on the
display), device vibrates, no ringtone
¡Maximum/Bus mode prole
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will nd this number
in the documents supplied by your network provider.
Security settings:
¡PIN: PIN request on/o, change PIN
¡Phone code: on/o, change (factory preset code: 1234)
Master reset:
You can restore all the factory settings on your phone
(factory preset code: 1234).
CAMERA AND PHOTO ALBUM
Your phone has a camera. You will nd photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_Press to take a photo.
Camera options:
If the camera is active press or
in the Settings menu _Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
¡and/or let you ick through the photo album.
¡Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.
TOOLS
In the Tools menu _
Alarm clock:
¡Setting the time: Enter the time and conrm. The alarm
clock will now go o at the time you have set every day.
¡O ff : Disable alarm clock
Switch o the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after ve minutes).
Birthday reminder:
Entering a birthday: New birthday
_Select From contacts or enter a Name
_Under Set date, enter the birthday date and
_under Reminder time, enter the time of day for the alarm
Bluetooth:
This function allows you to use Bluetooth-enabled
handsfree kits wirelessly.
¡Bluetooth on/off:
Enable/disable Bluetooth
¡Connect _Search for new devices:
Search for devices you want to connect
_Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.
CHARGING UNIT
Charging the phone using the charging unit:
Plug the charging cable into the port on the back of the
charging unit, and slot the phone into the charging unit.
Note: When the phone is being charged by the charging unit,
the vibration function for incoming calls is automatically
disabled. This prevents the charging unit from moving
without you wanting it to because of the phone vibrating.
The vibration function is activated again when you remove
the phone from the charging unit.
Using the phone while it is on charge:
There are a number of ways to accept a call while your phone
is being charged by the charging unit:
¡Leave the phone in the charging unit and press the green
button. The call will be taken in hands-free mode.
¡Remove the phone from the charging unit. The call will be
accepted automatically when you do this.
¡If you put the phone on charge during a call, the connection
will be maintained and hands-free mode will be activated.
FREQUENTLY ASKED QUESTIONS
The display screen is just blank/black:
¡Energy-saving is activated:
Press any key.
¡The keypad is locked and energy-saving mode is activated:
Press or the green button.
¡The phone is switched o:
Press for two seconds to turn it on.
¡The battery is completely empty, the phone has switched
itself o: Charge the battery.
EUPHORIA
For information on simply making and receiving calls,
go to www.emporia.eu
PartNo: V50_ShortManual-V4_54299-ENG | 201512 | Subject to mistakes, printing errors and technical changes.
ENGLISH
V50_ShortManual-V4_54299-ENG.indd 1 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Red button
¡When in a call: End call
¡When in the menu: One step back
¡When writing: Delete entry
menu
Menu key
Press this key once to call up the menu
camera key
Alarm clock button
Press this key once to access the alarm clock
On/O key
#
aA1!
key
¡When writing: Switch between upper case,
lower case and digits
¡Press and hold this key to access Missed calls.
¡Flashes when there is a missed call
Goes out once the call history has been
accessed.
Arrow keys
¡Klick through Contacts and menu
¡When the phone is on standby,
press to access Favourites.
¡When the phone is on standby,
press to access the Contacts.
Green button
¡Start or accept a call
¡In the menu: Conrm selection
¡On standby: Access Call info
1
key (mailbox))
Press and hold this key down
to listen to your voice mail
+
key
¡Press and hold: + (for country code,
e.g. +44 for the United Kingdom)
¡When writing: Symbol
(. , ? ! ' " ( ) @ \ / : _ ; + - * = % & < > £ $ …)
¡Short ashes: The battery is almost empty.
¡Even ashing: The battery is charging.
¡The light on constantly: The battery
has nished charging
Opening for wrist strap
Headset port
Attention: This is not a charger port!
Speaker
Micro USB port
For charging the battery
Volume buttons
¡Change the handset volume
¡Press to mute the phone when it
is ringing. (It will ring as normal next
time there is a call.)
Emergency button
Press this button for three seconds
in an emergency
Opening
for removing the battery cover
Torch (LED)
Camera-lens
Torch button
When the phone is on,
the torch can be on continuously.
¡Press this button for two seconds
to turn the torch on.
¡To turn the torch o,
press the button briey
Keypad lock
Press this button for two seconds to lock
or unlock the keypad
Micro USB port
For charging the battery
SMS MESSAGES
SMS (Short Message Service) messages are short written
messages.
Writing a message:
Open the menu by pressing
menu
. _Messages _
_Write message _.
Enter text using the keypad.
¡Each key has several characters assigned to it,
which can be selected by pressing the respective key several
times. (E.g. 2x
4
ghi
, 1x
2
abc
, 3x
5jkl
, 3x
5jkl
and 3x
6
mno
for Hallo)
1
1 . , - ? ! 1 ' @ : ; ( ) *
2
abc
a b c 2 ä à å ā â æ ç á ć
3
def
d e f 3 đ é ē € è ê ë
4
ghi
g h i 4 î ï í ì ğ ι
5jkl
j k l 5 £
6
mno
m n o 6 ö ñ ô œ ó ò
7
pqrs
p q r s 7 β $ ş
8
tuv
t u v 8 ü ù û ú
9
wxyz
w x y z 9 ŵ ý ÿ
0
Blank space; 0
+
Special characters: . , ? ! ' " (
) @ \ / : _ ; + - * = % & < >...
¡Press
#
aA1!
to change the input method:
¡abc: Lower case only
¡ABC: Upper case only ¡Abc: Upper and lower case ¡123 : Digits
¡Delete all: press and hold .
Sending an SMS:
Select Send to by pressing twice and then insert a
number, or press to search in contacts before
pressing again to send.
Receiving a message:
A short beep and a message on the display informs you
of new messages.
Pressing allows you to read the message immediately
or view it in your received message list via the Messages
menu _Received.
CONTACTS
Always save names and numbers with the international dialling
code, e.g. +44 for the United Kingdom, +1 for the United States
and +61 for Australia).
Press
menu
to open the menu.
_Go to Contacts by pressing . _
_Menu items: Search name, Add contact, Edit contact,
Delete, Send contact via SMS, Copy contact, My number,
Quick dial keys, Emergency numbers, Phone book settings
and SMSinPhoneBK.
Adding a contact (name and number):
Open the menu with
menu
. _Press to go to Contact.
_Go to Add contact by pressing . _
_Enter a name (see the section Writing a message
for text input information). __Insert the number
_Contact photo Yes/No _to save press
Searching for contacts:
Press to open Contacts _
¡Press and to ick through the entries
¡or enter the rst few letters of the entry you're looking for using
the keypad (and continue icking with if necessary). _
Once you've selected an entry, press to start a call.
Receiving a new contact via SMS:
In the Contacts menu _Enable the SMSincontacts
function to receive new entries via SMS.
Indicate whether you want to be able to receive new entries
from anyone (On) or only from contacts already saved on
the phone (Only from PhoneBk). The phone number will
automatically be stored in your contacts when you receive
an SMS with the following content:
#Name#Number#, e.g.: #Martin#436641234567#
SYMBOLS ON THE
DISPLAY Network signal strength
Roaming (abroad)
Battery indicator
New message
Missed call
Call forwarding
Prole: Silent/Sleep
mode
Prole: Maximum
Prol: Meeting/Theater
mode
Headset connected
Bluetooth activated
Bluetooth connected
Alarm clock on
Keypad locked
Redialling:
Press to bring up the call info.
_Press and to select a number.
_Start the call by pressing .
Hands-free: Press during a call to open the Options and
turn the hands-free function on or o.
Standby mode:
In standby mode the phone is on, but is not
running any applications (calls, SMS messages, etc.).
Accessing the menu:
¡Press
menu
to open the menu.
¡Scrolling with and/or through the menu items:
Messages, Photo album, Tools, Contacts, Call info, or
Settings
¡Press to select the option shown on the screen
(above the keys).
¡To return to standby mode, press several times.
Saving energy:
If a few seconds pass without the phone receiving any input
from you, the screen will go blank to save energy. In the
event of an incoming call or you pressing any key, the screen
will automatically light up again.
If the keypad is set to lock automatically,
the phone will only respond if the green button
or the key is pressed.
GETTING STARTED
¡Pressing the key for at least two seconds
switches the phone on.
¡To turn the phone o, press the key
for two seconds again.
When using a new SIM card for the rst time:
Enter the four-digit PIN code (personal identication
number) _Press to conrm the code.
Note: The PIN code is a four-digit number that is intended to
prevent somebody else from being able to switch on your
mobile phone. You have a maximum of three attempts to
enter the correct number. If you enter the wrong number
three times in a row, you will only be able to unblock the SIM
card with the PUK code. You will find the PIN code and PUK
code in the documents supplied by your network operator.
_ Select a Language by pressing and _
_Set time __Set date _
_Select a Text size by pressing and :
You can choose Small or Large _
Incoming call:
¡To answer: Accept the call by pressing .
¡To reject: Press .
¡To mute the ringtone temporarily:
Press the button (on the side of the phone).
To end a call: Press .
Dialling: Enter the number (incl. area code) you want to dial
using the keypad _Start the call by pressing .
V50_ShortManual-V4_54299-ENG.indd 2 01.12.15 12:24

Fig.1
Fig.3
Fig.2
Fig.4 Fig. 5
INSERTING A SIM CARD
Fig.1: Remove the battery cover.
Fig.2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.
INSERTING AND CHARGING THE BATTERY
Fig.3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig.4: Put the battery cover on the phone and press it down.
Fig.5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.
EMPORIA EMERGENCY CALL FUNCTION
You can save up to ve emergency numbers (family members,
friends and official institutions).
¡In an emergency press and hold the emergency button on
the back of the phone. (This works even when the keypad is
locked.)
¡The ve preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the rst
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of ve numbers
a maximum of three times.)
¡At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, press and hold for
3 sec. or turn your device o completely using and then
turn it on again.
¡To cancel the emergency call, press and hold .
¡During the emergency call, a warning tone will sound contin-
uously, to alert anyone nearby and the person being called.
¡If you do not have any emergency numbers saved, have no
credit on your prepaid phone card or are connected
to a foreign network without permission (e.g. roaming
is not activated), 112 will be dialled when you press the
emergency button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.
Adding/editing emergency numbers:
In the Settings menu _Emergency numbers
_Add emergency number
_Select an entry (e.g. EmNo. 1) by pressing
_Select OK by pressing
_Select Private or Help organisation
_Select a contact
Activating the emergency button:
In the Settings menu __Emergency button _O n / O ff
Pre alarm:
The pre alarm is a warning tone that sounds for
ten seconds and alerts anyone nearby to the emergency.
After this, the emergency call sequence starts.
In the Settings menu _Emergency numbers
_Pre alarm _O n / O ff
SETTINGS
In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predened settings (prole).
¡Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Conrmation tone,
Emergency tone
¡Silent/Sleep mode prole
Visual notications only (torch LED ashes, notications on
the display), no ringtone, no vibration function
¡Meeting/Theater mode prole
Visual notications (torch LED ashes, notications on the
display), device vibrates, no ringtone
¡Maximum/Bus mode prole
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will nd this number
in the documents supplied by your network provider.
Security settings:
¡PIN: PIN request on/o, change PIN
¡Phone code: on/o, change (factory preset code: 1234)
Master reset:
You can restore all the factory settings on your phone
(factory preset code: 1234).
CAMERA AND PHOTO ALBUM
Your phone has a camera. You will nd photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_Press to take a photo.
Camera options:
If the camera is active press or
in the Settings menu _Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
¡and/or let you ick through the photo album.
¡Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.
TOOLS
In the Tools menu _
Alarm clock:
¡Setting the time: Enter the time and conrm. The alarm
clock will now go o at the time you have set every day.
¡O ff : Disable alarm clock
Switch o the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after ve minutes).
Birthday reminder:
Entering a birthday: New birthday
_Select From contacts or enter a Name
_Under Set date, enter the birthday date and
_under Reminder time, enter the time of day for the alarm
Bluetooth:
This function allows you to use Bluetooth-enabled
handsfree kits wirelessly.
¡Bluetooth on/off:
Enable/disable Bluetooth
¡Connect _Search for new devices:
Search for devices you want to connect
_Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.
CHARGING UNIT
Charging the phone using the charging unit:
Plug the charging cable into the port on the back of the
charging unit, and slot the phone into the charging unit.
Note: When the phone is being charged by the charging unit,
the vibration function for incoming calls is automatically
disabled. This prevents the charging unit from moving
without you wanting it to because of the phone vibrating.
The vibration function is activated again when you remove
the phone from the charging unit.
Using the phone while it is on charge:
There are a number of ways to accept a call while your phone
is being charged by the charging unit:
¡Leave the phone in the charging unit and press the green
button. The call will be taken in hands-free mode.
¡Remove the phone from the charging unit. The call will be
accepted automatically when you do this.
¡If you put the phone on charge during a call, the connection
will be maintained and hands-free mode will be activated.
FREQUENTLY ASKED QUESTIONS
The display screen is just blank/black:
¡Energy-saving is activated:
Press any key.
¡The keypad is locked and energy-saving mode is activated:
Press or the green button.
¡The phone is switched o:
Press for two seconds to turn it on.
¡The battery is completely empty, the phone has switched
itself o: Charge the battery.
EUPHORIA
For information on simply making and receiving calls,
go to www.emporia.eu
PartNo: V50_ShortManual-V4_54299-ENG | 201512 | Subject to mistakes, printing errors and technical changes.
ENGLISH
V50_ShortManual-V4_54299-ENG.indd 1 01.12.15 12:24

Fig.1
Fig.3
Fig.2
Fig.4 Fig.5
INSERTING A SIM CARD
Fig.1: Remove the battery cover.
Fig.2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.
INSERTING AND CHARGING THE BATTERY
Fig.3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig.4: Put the battery cover on the phone and press it down.
Fig.5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.
EMPORIA EMERGENCY CALL FUNCTION
You can save up to ve emergency numbers (family members,
friends and official institutions).
¡In an emergency press and hold the emergency button on
the back of the phone. (This works even when the keypad is
locked.)
¡The ve preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the rst
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of ve numbers
a maximum of three times.)
¡At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, press and hold for
3 sec. or turn your device o completely using and then
turn it on again.
¡To cancel the emergency call, press and hold .
¡During the emergency call, a warning tone will sound contin-
uously, to alert anyone nearby and the person being called.
¡If you do not have any emergency numbers saved, have no
credit on your prepaid phone card or are connected
to a foreign network without permission (e.g. roaming
is not activated), 112 will be dialled when you press the
emergency button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.
Adding/editing emergency numbers:
In the Settings menu _Emergency numbers
_Add emergency number
_Select an entry (e.g. EmNo. 1) by pressing
_Select OK by pressing
_Select Private or Help organisation
_Select a contact
Activating the emergency button:
In the Settings menu __Emergency button _O n / O ff
Pre alarm:
The pre alarm is a warning tone that sounds for
ten seconds and alerts anyone nearby to the emergency.
After this, the emergency call sequence starts.
In the Settings menu _Emergency numbers
_Pre alarm _O n / O ff
SETTINGS
In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predened settings (prole).
¡Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Conrmation tone,
Emergency tone
¡Silent/Sleep mode prole
Visual notications only (torch LED ashes, notications on
the display), no ringtone, no vibration function
¡Meeting/Theater mode prole
Visual notications (torch LED ashes, notications on the
display), device vibrates, no ringtone
¡Maximum/Bus mode prole
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will nd this number
in the documents supplied by your network provider.
Security settings:
¡PIN: PIN request on/o, change PIN
¡Phone code: on/o, change (factory preset code: 1234)
Master reset:
You can restore all the factory settings on your phone
(factory preset code: 1234).
CAMERA AND PHOTO ALBUM
Your phone has a camera. You will nd photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_Press to take a photo.
Camera options:
If the camera is active press or
in the Settings menu _Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
¡and/or let you ick through the photo album.
¡Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.
TOOLS
In the Tools menu _
Alarm clock:
¡Setting the time: Enter the time and conrm. The alarm
clock will now go o at the time you have set every day.
¡O ff : Disable alarm clock
Switch o the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after ve minutes).
Birthday reminder:
Entering a birthday: New birthday
_Select From contacts or enter a Name
_Under Set date, enter the birthday date and
_under Reminder time, enter the time of day for the alarm
Bluetooth:
This function allows you to use Bluetooth-enabled
handsfree kits wirelessly.
¡Bluetooth on/off:
Enable/disable Bluetooth
¡Connect _Search for new devices:
Search for devices you want to connect
_Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.
CHARGING UNIT
Charging the phone using the charging unit:
Plug the charging cable into the port on the back of the
charging unit, and slot the phone into the charging unit.
Note: When the phone is being charged by the charging unit,
the vibration function for incoming calls is automatically
disabled. This prevents the charging unit from moving
without you wanting it to because of the phone vibrating.
The vibration function is activated again when you remove
the phone from the charging unit.
Using the phone while it is on charge:
There are a number of ways to accept a call while your phone
is being charged by the charging unit:
¡Leave the phone in the charging unit and press the green
button. The call will be taken in hands-free mode.
¡Remove the phone from the charging unit. The call will be
accepted automatically when you do this.
¡If you put the phone on charge during a call, the connection
will be maintained and hands-free mode will be activated.
FREQUENTLY ASKED QUESTIONS
The display screen is just blank/black:
¡Energy-saving is activated:
Press any key.
¡The keypad is locked and energy-saving mode is activated:
Press or the green button.
¡The phone is switched o:
Press for two seconds to turn it on.
¡The battery is completely empty, the phone has switched
itself o: Charge the battery.
EUPHORIA
For information on simply making and receiving calls,
go to www.emporia.eu
PartNo: V50_ShortManual-V4_54299-ENG | 201512 | Subject to mistakes, printing errors and technical changes.
ENGLISH
V50_ShortManual-V4_54299-ENG.indd 1 01.12.15 12:24

Fig.1
Fig.3
Fig.2
Fig.4 Fig. 5
INSERTING A SIM CARD
Fig.1: Remove the battery cover.
Fig.2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.
INSERTING AND CHARGING THE BATTERY
Fig.3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig.4: Put the battery cover on the phone and press it down.
Fig.5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.
EMPORIA EMERGENCY CALL FUNCTION
You can save up to ve emergency numbers (family members,
friends and official institutions).
¡In an emergency press and hold the emergency button on
the back of the phone. (This works even when the keypad is
locked.)
¡The ve preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the rst
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of ve numbers
a maximum of three times.)
¡At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, press and hold for
3 sec. or turn your device o completely using and then
turn it on again.
¡To cancel the emergency call, press and hold .
¡During the emergency call, a warning tone will sound contin-
uously, to alert anyone nearby and the person being called.
¡If you do not have any emergency numbers saved, have no
credit on your prepaid phone card or are connected
to a foreign network without permission (e.g. roaming
is not activated), 112 will be dialled when you press the
emergency button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.
Adding/editing emergency numbers:
In the Settings menu _Emergency numbers
_Add emergency number
_Select an entry (e.g. EmNo. 1) by pressing
_Select OK by pressing
_Select Private or Help organisation
_Select a contact
Activating the emergency button:
In the Settings menu __Emergency button _O n / O ff
Pre alarm:
The pre alarm is a warning tone that sounds for
ten seconds and alerts anyone nearby to the emergency.
After this, the emergency call sequence starts.
In the Settings menu _Emergency numbers
_Pre alarm _O n / O ff
SETTINGS
In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predened settings (prole).
¡Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Conrmation tone,
Emergency tone
¡Silent/Sleep mode prole
Visual notications only (torch LED ashes, notications on
the display), no ringtone, no vibration function
¡Meeting/Theater mode prole
Visual notications (torch LED ashes, notications on the
display), device vibrates, no ringtone
¡Maximum/Bus mode prole
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will nd this number
in the documents supplied by your network provider.
Security settings:
¡PIN: PIN request on/o, change PIN
¡Phone code: on/o, change (factory preset code: 1234)
Master reset:
You can restore all the factory settings on your phone
(factory preset code: 1234).
CAMERA AND PHOTO ALBUM
Your phone has a camera. You will nd photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_Press to take a photo.
Camera options:
If the camera is active press or
in the Settings menu _Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
¡and/or let you ick through the photo album.
¡Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.
TOOLS
In the Tools menu _
Alarm clock:
¡Setting the time: Enter the time and conrm. The alarm
clock will now go o at the time you have set every day.
¡O ff : Disable alarm clock
Switch o the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after ve minutes).
Birthday reminder:
Entering a birthday: New birthday
_Select From contacts or enter a Name
_Under Set date, enter the birthday date and
_under Reminder time, enter the time of day for the alarm
Bluetooth:
This function allows you to use Bluetooth-enabled
handsfree kits wirelessly.
¡Bluetooth on/off:
Enable/disable Bluetooth
¡Connect _Search for new devices:
Search for devices you want to connect
_Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.
CHARGING UNIT
Charging the phone using the charging unit:
Plug the charging cable into the port on the back of the
charging unit, and slot the phone into the charging unit.
Note: When the phone is being charged by the charging unit,
the vibration function for incoming calls is automatically
disabled. This prevents the charging unit from moving
without you wanting it to because of the phone vibrating.
The vibration function is activated again when you remove
the phone from the charging unit.
Using the phone while it is on charge:
There are a number of ways to accept a call while your phone
is being charged by the charging unit:
¡Leave the phone in the charging unit and press the green
button. The call will be taken in hands-free mode.
¡Remove the phone from the charging unit. The call will be
accepted automatically when you do this.
¡If you put the phone on charge during a call, the connection
will be maintained and hands-free mode will be activated.
FREQUENTLY ASKED QUESTIONS
The display screen is just blank/black:
¡Energy-saving is activated:
Press any key.
¡The keypad is locked and energy-saving mode is activated:
Press or the green button.
¡The phone is switched o:
Press for two seconds to turn it on.
¡The battery is completely empty, the phone has switched
itself o: Charge the battery.
EUPHORIA
For information on simply making and receiving calls,
go to www.emporia.eu
PartNo: V50_ShortManual-V4_54299-ENG | 201512 | Subject to mistakes, printing errors and technical changes.
ENGLISH
V50_ShortManual-V4_54299-ENG.indd 1 01.12.15 12:24

Fig.1
Fig.3
Fig.2
Fig.4 Fig.5
INSERTING A SIM CARD
Fig.1: Remove the battery cover.
Fig.2: Slide the SIM card into the SIM card holder
with the gold contacts facing down.
INSERTING AND CHARGING THE BATTERY
Fig.3: Insert the battery, making sure that the battery contacts
touch the phone's gold contacts.
Fig.4: Put the battery cover on the phone and press it down.
Fig.5: Plug the charging cable into the USB port on the top of
the phone.
Attention: Charge the battery for at least four hours before
using it the first time. Only use batteries and chargers that
are permitted for use with this specific model.
EMPORIA EMERGENCY CALL FUNCTION
You can save up to ve emergency numbers (family members,
friends and official institutions).
¡In an emergency press and hold the emergency button on
the back of the phone. (This works even when the keypad is
locked.)
¡The ve preset numbers will be dialled automatically in the
order you have saved them.
If it is not possible to get through to anyone on the rst
number, the second number will automatically be dialled.
If it is not possible to get through to anyone on the second
number, the third number will automatically be dialled,
and so on. (The phone will go through a list of ve numbers
a maximum of three times.)
¡At the same time as each emergency call, a text message
(SMS) will be sent to the contact, saying: »You are about to
receive an emergency call. An audible warning signal will
sound when you answer the call. Please press the 0 key
three times to establish the connection.«
Note: The contact must press the 0 key within 60 seconds, or
the call will be disconnected (to prevent your emergency call
going through to a contact's mailbox).
¡From the moment you make an emergency call, your
emporia phone will automatically answer any incoming calls
for one hour. To disable this function, press and hold for
3 sec. or turn your device o completely using and then
turn it on again.
¡To cancel the emergency call, press and hold .
¡During the emergency call, a warning tone will sound contin-
uously, to alert anyone nearby and the person being called.
¡If you do not have any emergency numbers saved, have no
credit on your prepaid phone card or are connected
to a foreign network without permission (e.g. roaming
is not activated), 112 will be dialled when you press the
emergency button.
Note: If you want to add the number of an official institution
such as the police or fire brigade as an emergency number,
you must check that this is okay with the respective
institution beforehand. We do not assume liability for any
costs incurred through you calling such an institution by
mistake.
Adding/editing emergency numbers:
In the Settings menu _Emergency numbers
_Add emergency number
_Select an entry (e.g. EmNo. 1) by pressing
_Select OK by pressing
_Select Private or Help organisation
_Select a contact
Activating the emergency button:
In the Settings menu __Emergency button _O n / O ff
Pre alarm:
The pre alarm is a warning tone that sounds for
ten seconds and alerts anyone nearby to the emergency.
After this, the emergency call sequence starts.
In the Settings menu _Emergency numbers
_Pre alarm _O n / O ff
SETTINGS
In the Settings menu _
Sound & alerts:
You can personalise the settings for tones, signals and
vibration or select a set of predened settings (prole).
¡Menu items: Ringtone, Alarm melody, Ringer volume,
Silent/Sleep mode, Meeting/Theater mode,
Maximum/Bus mode, Increasing ring, Vibra for call, Vibra
for alarm, Key tones, Message alert, Vibra for messages,
Handset volume, Handsfree volume, Conrmation tone,
Emergency tone
¡Silent/Sleep mode prole
Visual notications only (torch LED ashes, notications on
the display), no ringtone, no vibration function
¡Meeting/Theater mode prole
Visual notications (torch LED ashes, notications on the
display), device vibrates, no ringtone
¡Maximum/Bus mode prole
Key tones, SMS tone and vibration function activated,
ringtone volume is set on maximum
Mailbox number:
Enter the number for your mailbox. You will nd this number
in the documents supplied by your network provider.
Security settings:
¡PIN: PIN request on/o, change PIN
¡Phone code: on/o, change (factory preset code: 1234)
Master reset:
You can restore all the factory settings on your phone
(factory preset code: 1234).
CAMERA AND PHOTO ALBUM
Your phone has a camera. You will nd photos you have taken
in the menu under Photo album.
Taking a photo:
In standby mode, enable the camera by pressing .
_Press to take a photo.
Camera options:
If the camera is active press or
in the Settings menu _Camera settings _
Auto timer, Effect, Size, Quality and Night mode.
Photo album:
Your photos will be saved in the Photo album menu.
¡and/or let you ick through the photo album.
¡Pressing opens Options for the selected picture.
Available options: View, Send, Wallpaper, Contact photo,
Rename, Delete, Delete all and Memory
Note: You can connect your phone to a PC using the USB data
cable and transfer your photos.
Note: Using a micro SD card will increase the storage capacity
of your phone. You can purchase these cards from electronics
stores.
TOOLS
In the Tools menu _
Alarm clock:
¡Setting the time: Enter the time and conrm. The alarm
clock will now go o at the time you have set every day.
¡O ff : Disable alarm clock
Switch o the ringing alarm clock by pressing .
Mute the alarm by pressing or
(it will ring again after ve minutes).
Birthday reminder:
Entering a birthday: New birthday
_Select From contacts or enter a Name
_Under Set date, enter the birthday date and
_under Reminder time, enter the time of day for the alarm
Bluetooth:
This function allows you to use Bluetooth-enabled
handsfree kits wirelessly.
¡Bluetooth on/off:
Enable/disable Bluetooth
¡Connect _Search for new devices:
Search for devices you want to connect
_Select devices by pressing .
The next time you enable Bluetooth, devices that have
been connected before will be recognised and connected
automatically.
CHARGING UNIT
Charging the phone using the charging unit:
Plug the charging cable into the port on the back of the
charging unit, and slot the phone into the charging unit.
Note: When the phone is being charged by the charging unit,
the vibration function for incoming calls is automatically
disabled. This prevents the charging unit from moving
without you wanting it to because of the phone vibrating.
The vibration function is activated again when you remove
the phone from the charging unit.
Using the phone while it is on charge:
There are a number of ways to accept a call while your phone
is being charged by the charging unit:
¡Leave the phone in the charging unit and press the green
button. The call will be taken in hands-free mode.
¡Remove the phone from the charging unit. The call will be
accepted automatically when you do this.
¡If you put the phone on charge during a call, the connection
will be maintained and hands-free mode will be activated.
FREQUENTLY ASKED QUESTIONS
The display screen is just blank/black:
¡Energy-saving is activated:
Press any key.
¡The keypad is locked and energy-saving mode is activated:
Press or the green button.
¡The phone is switched o:
Press for two seconds to turn it on.
¡The battery is completely empty, the phone has switched
itself o: Charge the battery.
EUPHORIA
For information on simply making and receiving calls,
go to www.emporia.eu
PartNo: V50_ShortManual-V4_54299-ENG | 201512 | Subject to mistakes, printing errors and technical changes.
ENGLISH
V50_ShortManual-V4_54299-ENG.indd 1 01.12.15 12:24