
Fig. 1: Remove battery cover (as shown).
Fig. 2: Slide SIM card in with the gold contact facing down.
3 INSERT BATTERY AND CHARGING
Fig 2 Fig 3
Fig 1
• Fig. 3: Insert battery (gold contacts on right front side).
• Fig. 4: Close battery door: slide cover to closed position with a ‘click’.
• Fig. 5: Plug charging cable into the socket on the side of the phone
• Charging: Battery indication bars in upper right corner of the display
are moving and the LED on the upper side of the closed phone is on.
• Full battery: Bars in upper right display corner are solid.
Note: Charge battery for at least 2 hours before rst use!
4 DISPLAY SYMBOLS (SCREEN)
1.
[ok
(Edit) à
[ok
Add number: Enter number/ select phone
book entry
[ok à
[ok .
2. to Subject (this will be the headline of the message) à
[ok
(Edit) àInsert message text à
[ok
(Done).
3. Edit content: 1x à
[ok
(Edit) à Insert text or picture:
[ok
(Options) àto Add picture:
[ok
àscroll to picture with
àchoose picture with
[ok
[ok
(done).
If you have problems at the rst time sending MMS, contact
your operator to check MMS settings.
10 CAMERA:
Take picture: press camera-button to start camera à
press to take picture, store with
[ok .
Camera settings: ,: shutter sounds, image size, white
balance
Picture gallery: menu àselect Pictures, scroll to next picture
with and view with 2x
[ok .
• Pictures: à Option: View, Send as MMS, Use as back-
ground, Use for contact, (choose the phone book entry, [note:
only contacts from phone memory, not from SIM-card]. Calls
to/from this contact will then show the linked picture on the dis-
play), Rename, Delete, Delete all pictures.
11 UTILITIES:
Bluetooth:
• Switch on: In menu à Settings
[ok
àBluetooth
[ok
à
Bluetooth on/off
[ok .
• Pairing: menu Settings
[ok
àBluetooth
[ok
àConnections
[ok
àSearch for new device
[ok
àselect the device you want
to pair,
[ok . Next time you turn on Bluetooth, connection will
start automatically.
14 FREQUENTLY ASKED QUESTIONS
• Screen shows “Insert SIM card! Only emergency call
112“: Check the direction of the SIM card
• A call failed: Check the selected telephone number and
area code again for accuracy (area code entered?).
• The mobile telephone display is blank/black: Telephone
is in energy saving mode (press any key) or it is switched
off (press for 2 seconds to switch on).
• The mobile phone does not react: Remove battery, re-
insert and switch on the device. If there is still no reaction,
refer to the service centre.
• The charging procedure does not begin: This can take
several minutes. If there is no reaction after 10 minutes,
refer phone to service centre.
6 PHONE BOOK
Save names and numbers (start with international prex) by
entering menu in standby mode (Standby-Mode: chapter 5) with
, then , , ,
[ok
à
[ok
Menu-Points: Search name, Add
contact, Own Number, Emergency numbers (add, change,
delete, status on/off), Quick dial keys, Copy All, Edit Contact,
Delete, Send contact by SMS, SMS in PhoneBK, Settings;
Storing phone book entries (Name & Number): Enter menu
with à continue to Phone book: , , , [ok à continue
to Add contact: ,
[ok àEnter name via the keypad (See
chapter 8 Write SMS for text entry) , àEnter number, and
[ok to Save.
Searching phone book entries:
In standby mode: open the phone book with :
• Scroll through the entries with and or:
• Search names: enter the initial letters of the searched name
via the keypad (scroll through with ). When the requested
name is shown, press
[ok to start a call.
Add phone book entry via SMS:
In menu phonebook àSMS in PhoneBK to turn function
to receive phonebook entries via SMS message on/off, or
specify that only phone book contacts can send entries to
you. The phone number will be saved automatically in your
phone book when you receive a SMS with the following content:
#name#number# e.g.: #Tom#+491509876543#
Buttons M1, M2, M3:
Store or change your favorite numbers: Enter menu àPhone
book àQuick Dial keys à select M1, M2 or M3 à
[ok (Ok).
To add: enter new name and number or press
[ok (Search) to
access the contact list and store an existing contact. To edit:
Delete and enter new name and number.
7 EMERGENCY FUNCTION
You can store a total of 5 emergency numbers (family,
neighbours, friends, emergency services). In case of emergency
these preselected numbers will be dialled automatically in a
sequence, if the emergency key on the back of the phone gets
pressed and held.
A continuous warning tone then starts in “loudspeaker mode”
during emergency, so you and people nearby are warned of the
emergency! If the rst number cannot be reached, the second
number will be called automatically.
If the second number in row cannot be reached, the third will be
called. (max. 3 rotations of the 5 numbers).
Note: To avoid getting caught on a mailbox, the reached person
has to conrm your emergency by calling back.
If no emergency number is saved or if your calling card has
expired or you have no access to a foreign network (e.g.
roaming not permitted), 911 will be dialled.
Saving emergency numbers: Enter Menu àPhone book
àEmergency numbers àAdd Emerg. No. àchoose
Emergency number (1-5) à set if it’s a private number or a help
organisation à pick contact from phone book à done
Note: select emergency number: private number (has to conrm
as explained above) or ofcial service number, e.g.: ambulance,
police, etc. (no conrmation call required).
Switch emergency function On / Off: Enter menu: Settings à
Emergency numbers àOn/Off.
Note: If you want to save numbers from ofcial services, police,
re department, etc. as emergency numbers, you have to
clarify this with these institutions. No liability will be assumed for
possible costs incurred if you dial accidentally.
2 INSERT SIM CARD
1
2
newSMS
ringtoneoff
signalstrength roamingmode
alarmon calldiversion
missedcall earphone
BluetoothON Bluetoothheadsetconnected
profile„maximum“ON(ringtonevolumeveryloud)
profile„Meeting“ON
battery
strength
newSMS
ringtoneoff
signalstrength roamingmode
alarmon calldiversion
missedcall earphone
BluetoothON Bluetoothheadsetconnected
profile„maximum“ON(ringtonevolumeveryloud)
profile„Meeting“ON
battery strength
new SMS
ringtone off
Bluetooth on
signal strength
alarm on
missed call
roaming mode
call diversion
Bluetooth headset connected
prole ”maximum“ ON (ringtone volume very loud)
prole ”Meeting“ ON
Alarm:
Standby mode 1x àStatus On/Off: to switch Alarm clock
on or off à, Time: set the time, , Repeat: set repetition
(once, daily, customised). If the alarm rings, end with
[ok . Use
mute function with to reactivate the alarm after 1 minute.
5 FIRST STEPS
Switch on the phone: press power on/off-key for 2 sec.
Switch off by pressing power on/off for 2 seconds again.
When using a new SIM card, enter the 4 digit PIN Code (Personal
Identication Number) and conrm with .
PIN-Code: The PIN-Code is a 4-digit number combination
preventing others from switching on your mobile phone.
• Switch off your PIN-Code: In menu: Settings à Security
Settings àPIN àPIN off.
Standby mode:
In standby mode the phone is turned on, but no active applications
(calling, messaging, etc.) are running. To get into standby mode,
when you are e.g. in the settings menu, press repeatedly.
Entering Menu:
• Press - key.
• Scroll through menu points: with and .
• Conrm: with .
Note: due to inactivity phone lights and screen turn off after a
while. To turn on again, press any key.
Pick up call: Press - key.
End call or Reject call: Press - key.
Dial: Enter the telephone number via the keypad (including area
code with 0) - start call with .
Redial list: press - key, scroll through call list with (all
dialled, missed and received calls), select a number and start
call with .
Handsfree Speaking: To talk without holding the phone to your
ear, switch on/off the handsfree function during a call: press
Handsfree.
Note: if you stay at a menu point without confirming ( ),
a help text with explanations pops up. To leave this, press .
[ok
[ok
[ok
[ok
[ok
[ok
[ok
[ok
•
13 DISPOSAL
•
Disposal of packaging: Packaging materials are
recyclable and shall enter the recycling process.
•
Disposal of battery: Do not insert battery into
household waste for disposal! You are obligated to
return used batteries. These can be handed into local
collection areas or to specialty shops.
•
Disposal of Device: Take care of the environment:
When this product is taken out of service, do not
throw it into the household waste, but dispose of it,
where old devices are accepted and brought into an
eco-friendly disposal/recycling procedure.
Fig 5
Fig 4
Active data transfer
15 CAUTION
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications
Commission of the
U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of
scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure of measurement is known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Transmitting at its
highest certied power level in all Your mobile phone is a radio transmitter and receiver. It is at the highest certied power level, the well below the
maximum value. This is power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base
station antenna, the available for sale to the public, it must be tested and certied to the FCC that it does not exceed the limit established by the
government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. The FCC has granted an Equipment Authorization for evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model the Display Grant section of http://www .fcc.gov/oet/fccid after searching on FCC ID: ZVP-V32C
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
IC warning
- English:
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
2. Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
IC: 10262A-V32C
- French:
L’exploitation est autoriséea ux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage r adioélectrique subi, mêmes i le
brouillage est susceptible d’en compromettre le fonctionnement.»
IC: 10262A-V32C
Signed:
Eveline Pupeter
General Manager
Issue date: 01.02.2012
Area of Issue: Linz/Austria
Each button has several characters, which appear by pressing
several times: (e.g. 2x , 1x , 3x , 3x , 3x for hello).
Switch between different entry methods by pressing
abc: only small; Abc: rst letter capitalised; ABC: all CAPITAL;
123: Numbers
Send SMS: Select Send with 2x [ok and enter number or select
from phone book (2x [ok , select contact with [ok ). Press [ok . to
send SMS.
9 MMS MESSAGES
MMS (Multimedia Message Service) are messages incl.
pictures, audio, etc.
First time use: Menu àMMS àMMS Settings àMMS account
àchoose operator
Send MMS: enter Menu with Messages àMMS à Create
new MMS:
. , ! ? ‘ “ @ : 1
a b c 2 ä æ å à
d e f 3 è è ê
g h i 4 ì í î ï
j k l 5 £
m n o 6 ö ø ó
p q r s 7 ß $
t u v 8 ü ù ú
w x y z 9 ý þ
space; 0
special character: , . ? ; : !
“ ’ @ _ ~ & + - ( ) < > { } [ ] ...
8 SMS MESSAGES
SMS (Short Message Service) are written messages.
Receive SMS: A short signal and a written information on
the display inform you about a new, incoming SMS message.
Read the message immediately by pressing [ok
or see a list of
messages which have already been received in the menu à
Messages àSMS àReceived SMS.
Write SMS: With Enter menu: àMessages àSMS
àWrite new SMS: The text entry is done by the keypad.
12 OTHER FUNCTIONS IN SETTINGS
Enter menu with à continue to Settings: ,
[ok à
• Sound & Alert: To choose a phone prole (e.g. silent) and
congure your personal settings.
•
Call waiting: You can activate/deactivate and check status
to
get a notication about an incoming call while having a phone talk.
• Network settings: Choose automatic (automatic boot in a
network) or manual selection (select a network manually).
• Favorites : your favorite functions pressing 1 button
• Auto power on/Auto power off.
• Voicemail number: Change the voicemail number.
• Security settings: Activate, deactivate or change PIN and
phonecode (default phone code: 1234).
• Restore Factory: Reset the phone to factory settings.
FCC warning
SAR Value
The maximum value of Head SAR is 0.103 W/kg. The maximum value of Body Worn is 0.795 W/kg which was tested under the separation
distance of
distance of 15mm without any accessory.
When using any body worn accessory, please help to make sure it at least 1.5cm clearance between phone and human body. The body worn
accessory should not contain any metal.