EMPORIA Smart Outlet User manual

Installation Guide

Need help?
emporiaenergy.com/support
[e-mail]
1-844-EMPORIA (367-6742)



Smart Outlet information
The Smart Outlet can only connect to 2.4
GHz WiFi networks.
The Smart Outlet has an output of 15A
and a maximum load power of 1,800W.
Do not use the Smart Outlet in any
manner other than specified in this
installation guide.
Do not attempt to open, disassemble, or
repair the Smart Outlet.
If you believe the Smart Outlet may be
damaged, do not attempt to use it.
Operating temperatures for the Smart
Outlet are 14° F (-10° C) or above 140° F
(60° C).







Power
socket
Power
button
LED status
light
The Emporia Smart Outlet
The Emporia Smart Outlet is a simple,
elegant device that plugs into a standard 15
or 20A 120V wall outlet and passes through
15A of current to provide not only power, but
24/7 timers, scheduling, and energy
monitoring to whatever you plug into it --
from anywhere!

Get the app
emporiaenergy.com/app
Download the Emporia Energy app onto your
phone or tablet from the Apple App Store or
Google Play. Create an account and choose
Smart Outlet to begin the setup process. If
you already have an account, go to Settings
> Manage Devices > + Add a Device and
then choose Smart Outlet to begin the setup
process.

Plug in the Smart Outlet
Plug your Emporia Smart Outlet into the wall
outlet you’d like to control and monitor. Use
your phone to check the signal strength of
your Wi-Fi network next to the wall outlet
you’ve chosen. Low/no signal may require a
Wi-Fi extender for the Smart Outlet to work.
You should see the blue LED status light
blink rapidly, letting you know that the outlet
is ready to setup. If not, press and hold the
Power Button for 6 seconds, until it is.
Rapidly
blinking blue

Enter your credentials
Your Smart Outlet requires a 2.4 GHz WiFi
connection. 5.0 GHz will not work.
Connect to your home network with one of
two modes:
Quick Mode (recommended)
Connect the Smart Outlet to the same
network your phone is on.
Hotspot Mode
Connect the Smart Outlet to a different
2.4 GHz network than your phone is on.


2.4 GHz 5.0 GHz
Your phone will attempt to prefill the SSID
and password of the WiFi network it is
connected to. If your password is not stored,
you will have to provide it.
If you’d like to connect your Smart Outlet to
a different network than your phone is on,
click the menu button to the right of the
SSID and choose the network you’d like to
connect to. You will need to use Hotspot
Mode to connect to the outlet.

Quick Mode (recommended)
To use Quick Mode, your phone and Smart
Outlet will need to be on the same 2.4 GHz
WiFi network. If not, try using Hotspot Mode.
Status light is rapidly blinking blue
Ensure the LED status light is blinking
twice per second. If not, press and hold
the power button for 6 seconds, until it is.
Tap Confirm
Ensure you are in Quick Mode and not
Hotspot Mode and tap the button in the
app to confirm that the light is rapidly
blinking blue.
Name, set timezone, and set level
Enter a name and timezone for your
outlet. If you own an Emporia Vue, you
can nest the outlet under it or its circuits.
Tap Let’s Go!
Now you’re ready to get started
controlling and monitoring your Smart
Outlet.





Hotspot Mode
If your phone and Smart Outlet will be on the
same 2.4 GHz WiFi network, we recommend
Quick Mode. Otherwise, take these steps :
Tap the Hotspot Mode tab in the app
Ensure the app is not Quick Mode
Status light is slowly blinking blue
Ensure the LED status light is blinking
every other second. If not, press and hold
the power button for 6 seconds, until it is.
Tap Confirm
In the app, tap to confirm that the light is
slowly blinking blue.
Connect to the EMPORIA Hotspot
Go to your phone’s WiFi settings and
connect to the open hotspot:
EMPORIA_xxxxxx_OUTLET
Return to the app
The outlet will connect to your network.
Name, set timezone, and set level
Enter a name and timezone for your outlet.
If you own an Emporia Vue, you can nest
the outlet under it or its circuits.
Tap Let’s Go!
Now you’re ready to get started controlling
and monitoring your Smart Outlet.







Your phone should reconnect to your network.
If not, you may need to manually connect.

The Smart Outlet is powered on and the
LED Status Light matches with the mode
you are using to connect.
Quick Mode = rapidly blinking blue
Hotspot Mode = slowly blinking blue
You have entered the correct network
password.
There is adequate WiFi signal where you
have plugged in your Smart Outlet.
Your router allows 2.4 GHz connections.
5.0 GHz will not work.
Your WiFi router’s firmware is up-to-date
Your WiFi Router is not blocking the
connection in its settings.
These are the various states of the light:







Troubleshooting
If you are having trouble connecting your
Smart Outlet to your network, please ensure
the following:
Light Status Condition
No light Does not have power
Rapid Blue Blink Quick Mode
Solid Blue Relay ON and connected to WiFi
Solid Purple Relay OFF and connected to WiFi
Slow Blue Blink Hotspot Mode
Slow Red Blink No WiFi connection