EMspec QUADRANT CLOCK User manual

User Manual
[en] Instructions for installation and use
www.emspec.design
QUADRANT CLOCK

Table of Contents
Introduction 4- 5
6-7
8- 9
10- 11
12
13
14
14
15
15
15
Descriptions
Installation
Time Display
Function & Operation
Trouble Shooting
Important Safety Information
Repairs
Cleaning & Maintenance
Technical Specifications
Warranty

54
Introduction
The package contains Required tools and materials
Read this user manual carefully before using QUADRANT CLOCK for the first
time in order to ensure proper operation. Please proceed according to the
instructions. You can find this instruction document online at www.emspec.
design/support.
WARNING! The QUADRANT CLOCK installation requires at least two people.
Installation issues should be diagnosed by an expert technician in advance.
Installation work should only be carried out by qualified technicians. All
instructions in the guide must be followed step by step. EMspec is not liable
for improper installation of QUADRANT CLOCK.
WARNING! Please ensure that the wall have sufficient load-bearing capacity
for the 5 kg weight of the QUADRANT CLOCK.
WARNING! Selecting the right type of screws and wall plugs depending on the
construction of the wall. The enclosed screws and wall plugs are suitable for
concrete wall.
Before installing QUADRANT CLOCK, please ensure that you have all the
following components and tools.
• QUADRANT CLOCK
• USB Type-C cable 2m
• European USB plug adaptor
• Wall mount
• Stainless steel knurled thumb screw
• Screws
• Wall plugs
• Instruction template
• User manual
• Cotton gloves
• Duster
• Leather holder
• Instruction template
• Appropriate screws and wall plugs
• Power drill with the right drill bit
• Cordless screwdriver or screwdriver
• Pocket rule
• Spirit level
• Tape

76
Descriptions
QUADRANT CLOCK back
Cleaning & Maintenance tools
Instruction Template
Knurled thumb screw hole
Type-C connector Socket
Type-C connector
USB connector
USB socket adaptor
USB Type-C cable 2 mEuropean USB power adaptor
Wall mount Screw Duster Leather holder
(for Duster)
Cotton glovesWall plug
使用說明:
先以此紙稿比對安裝位置
於牆上鑽出三個螺絲孔
移開紙稿

98
• Hang the QUADRANT CLOCK on the wall mount
• Insert the power supply cable into a plug socket
Put the knurled thumb screw
on the back of QUADRANT
CLOCK
Insert the the Type-C
connector into the Type-C
connector Socket
Connect the USB Type-C
cable with the USB power
adaptor
Drill three screw holes in the wall
Level and tape the
template to the wall
Fix the wall mount on the wall
and remove the instruction tamplate
1. Drilling
2. Wall mounting
3. Electrical Connection
使用說明:
先以此紙稿比對安裝位置
於牆上鑽出三個螺絲孔
移開紙稿
Wall mount
Wall mount
Wall
USB Type-C cable
Knurled thumb screw
QUADRANT CLOCK
Screw Wall plug Screw hole
QUADRANT CLOCK back
QUADRANT CLOCK back
Side View
Installation

1110
Time Display
x: Hour
y: Minute
Spacing (Quarter)
1-5 min
10h 12h
16-20 min
31-35 min
(x,y)=(Hour, Minute)
• From the left to the right
• The first row in the vertical direction is one o'clock, the second row is two
o'clock, and so on. At ten o'clock, the hourlight is on the tenth row.
Minute light (Y axis)Hour light (X axis)
• From the bottom to the top
• The first columns in the horizontal direction is 1-5 minute.
• When every 1 minute passes, the brightness of the light is increasing by
one-fifth per minute.

1312
Function & Operation Trouble Shooting
Problem
This section provides a list of solutions for common problems with
QUADRANT CLOCK. If your issue is not addressed in this section or any
further problem persists, please contact our support team.
Not turn on
Incorrect time display
No light show
Remote App not working
Solution
• Use the adaptor and type-C USB Cable
officially provided by EMspec only.
• Visually inspect the Type-C USB cable
for damage. Do not use if frayed, cut, or
damaged in any way.
• Make sure that the power cable is firmly
plugged in and the power outlets are
switched on.
• Confirm the wall power outlet is active
(receiving power). Try a different power
outlet.
• If the clock isn't showing the correct time,
go double-check the time setting on our
APP (under the setting section) and make
sure the time is set properly and that you
have "set time automatically " turned on.
• If the clock isn't showing the light show
when it's turned on/off or every hour, go
double-check the APP light show setting
and make sure that you have turned on the
light show.
• Make sure that you have turned on the
Bluetooth and pair with QUADRANT CLOCK.
• Close the app and then re-open and try
again.
• Make sure that your device has the latest
version of the software.
• Make sure that you have turned on the Bluetooth and pair with
QUADRANT CLOCK.
• Close the app and then re-open and try again.
• Make sure that your device has the latest version of the software.
APP control
Requires iOS 11.1 or later Requires Android 4.3 and up
Touch this button to switch on/ off the light show.
Light Show
Time Calibration
Light Mode
Power On/ Off
Brightness Control
Set different lightness level to adapt various environment.
Touch this button to adjust the time.
With the built-in Bluetooth, you can simply use your smartphone as a remote
control.

1514
Important Safety Information
Repairs
Cleaning & Maintenance
Technical Specifications
Warranty
• Repair work should only be carried out by a certified expert or repair
technicians.
• Never try to dismantle the QUADRANT CLOCK yourself.
• Never attempt to repair the QUADRANT CLOCK or replace any of its
components yourself. If any parts of your product require replacement,
please contact the manufacturer.
• Indoor use only.
• Dry locations only.
• Do not use in hazardous areas.
• If the product is damaged or defective, stop using the product
immediately.
• Turn off the power immediately in the event of abnormalities such as
smoke or unusual odors being emitted. Be sure to unplug the power plug
from the outlet and be careful to avoid electric shocks or burns.
• Do not damage, alter, excessively bend, twist, pull or heat the power
cord.
• Never handle the plug with wet hands. It may cause result in receiving an
electric shock.
• Before cleaning or maintenance operations, always unplug from the wall
outlet.
Dimension W 80 cm * H 38 cm * D 3.8 cm
• We recommend that it is preferable to handle cleaning works wearing
cotton gloves.
• Dust first with a duster. Make sure there is no dust on the surface of the
QUADRANT CLOCK to avoid scratching.
• Clean gently with a soft wiping fabric dipped with alcohol.
QUADRANT CLOCK is backed by a 2-year warranty from the date of purchase.
The repairs cover failures due to defects in material and workmanship.
Our manufacturing warranty excludes claims resulting from scratches or
general wear and tear, not following instructions. Our warranty also does not
cover damage caused by human factors, accident, and natural calamities.
QUADRANT CLOCK should only be serviced by qualified professionals at the
place of purchase or at the EMspec service center in accordance with the
terms of the EMspec warranties.
Please read and follow all safety instructions.
Material aluminium, acrylic
Weight 5kg
Manufacture Taiwan
Rated Wattage MAX 25W
Rated Voltage 100V~ 240V
Product Input Voltage 5V
Operating Temperature -10°C~ 50°C
Color Temperature 3000K

QUADRANT CLOCK
Designed by EMspec / Made in Taiwan
EMspec 2019 © All rights reserved
www.emspec.design