
Leggere attentamente le istruzioni prima di installare il vostro Cucù.
Il vostro orologio a cucù è uno strumento delicato atto alla misurazione del tempo e va 
trattato con estrema cura e delicatezza. Il movimento del cucù è dell’azienda tedesca 
Engstler produttrice di cucù classici e nota per la qualità dei suoi prodotti.
Ogni orologio viene testato per almeno 24H e controllato in ogni suo aspetto prima di essere 
imballato e spedito. Tutti gli orologi che lasciano il nostro magazzino sono integri e perfet-
tamente funzionanti.
Non toccare mai l’uccellino con le mani ne quando è dentro e, soprattutto, quando è fuori 
perché questo compromette il meccanismo che controlla il movimento dell’uccellino. Non 
applicare o spruzzare qualsiasi prodotto sull’orologio perché questo pregiudica la scor-
revolezza dell’uccellino sulla sua guida. Non tenere il cucù in ambienti polverosi. Onde 
evitare che l’orologi non suoni più a mezzogiorno non far ruotare le lancette troppo veloce-
mente ma con lentezza e delicatezza. Questo incoveniente si verifica anche quando le 
lancette vengono urtate e spostate dal loro asse. Questo pregiudica anche la rotazione 
delle stesse che si bloccheranno.
Progetti non risponde di malfunzionamenti causati dall’errata installazione o da un 
utilizzo non corretto dell’orologio. 
Messa in funzione del Cucù
Posizionare le lancette sulle ore 12.
Inserire due batterie mezza torcia facendo attenzione alla polarità.
Appendere l’orologio alla parete.
Regolare l’ora girando le lancette dei minuti in senso orario. E’ importante fermarsi ogni volta che la 
lancetta dei minuti passa sulle ore 12 ed attendere che il cucù canti e batta i colpi dell’ora.
In caso l’orologio batta i colpi non corrispondenti all’ora (es. batte 2 colpi e le lancette segnano le nove), 
per rimetterlo in fase è sufficiente portare la lancetta delle ore sulle due. Prestare molta attenzione a 
non toccare la lancette dei minuti altrimenti il cucù non canterà più al minuto 0.
L’intensità del suono è regolabile con l’interrutore che si trova sul retro dell’orologio.
Un sensore sensibile alla luce ferma automaticamente la suoneria in assenza di luce.
Le batterie devono essere cambiate quando l’uccellino farà fatica ad uscire.
Non lasciare le batterie esaurite all’interno del movimento perchè la possibile perdita di acido potrebbe 
danneggiare irreparabilmente il movimento dell’orologio.
A volte può capitare che, a causa di un non corretto movimento delle lancette, l’uccellino non canti 
esattamente allo scoccare dell’ora. Per sistemare il problema eseguire le seguenti operazioni: togliere 
le batterie. Girare le lancette fino a quando segneranno le ore 12:00. Quindi far girare la lancetta dei 
minuti fino a quando non sentirà un click che sicuramente non corrisponderà alle 12:00. La lancetta dei 
minuti è inserita a pressione, per toglierla deve tirarla gentilmente verso l’alto, perpendicolarmente al 
quadrante. Una volta estratta va reinserirta posizionandola sulle 12:00. Provare a far girare molto len-
tamente la lancetta dei minuti e dovrebbe sentire il click alle ore 1:00. Se dovesse sentire il click in una 
posizione diversa ripetere l’operazione fino a quando non lo si sentirà esattamente alle 1:00 o 2:00 
ecc.. L’orologio ora suonerà correttamente.
Please read the instructions carefully before installing your cuckoo.
Your cuckoo clock is a delicate instrument suitable for measurement of time and should be 
treated with extreme care and delicacy. Cuckoo clock movement is made by the German 
company Engstler manufacturer of classic cuckoo and well known for the quality of its prod-
ucts. Each clock is tested at least 24H and controlled in every aspect before being packed 
and shipped. All clocks that leave our warehouse are undamaged and fully functional.
Never touch the bird when it is inside and, especially, when it’s outside because this com-
promises the mechanism that controls the motion of the bird. Do not apply or spray any 
product on the clock because this will affect the bird’s movement. Do not hold the cuckoo 
in dusty locations. To avoid that the clocks do not sounds at noon do not turn the hands too 
quickly but slowly and gently. This inconvenience also occurs when the hands are impacted 
and moved by their axis. This also affects the rotation of the hands that will lock. 
Progetti shall not be liable for malfunctions caused by incorrect installation or incor-
rect use of the clock.
Cuckoo-clock operating instructions 
Turn the minute hand clockwise till it points to 12 o’clock.
Insert two C cell batteries as inticated in battery holder. Pay attention to + and -.
Hang the clock on the wall.
Turn the minute hand clockwise, round and round till the clock tells the correct time. Important: let the 
cuckoo strikes every full hour.
If the time is not corresponding with the number of Cuckoo strikes please proceed as follows: if the 
Cuckoo strikes twice turn the hour hand to two. If the Cuckoo strikes nine times turn the hour hand to 
nine. Be very careful do not to touch the minute hand, otherwise the cuckoo will not sing to minute 0.
At the back side of the clock you will find a switch for the sound: “high”, “low” and “off”.
The Cuckoo strike is switched off automatically during the night controlled by a light sensor.
Batteries must be replaced if the bird does not come out or if the clock is slow. Do not leave exhausted 
batteries within the movement because the possible loss of fluid may cause irreparable damage to the 
clock movement.
Sometimes, due to a shock taken during the transport, the bird stuck into his slide. To unlock it, after 
removing the batteries and put the hands at noon, gently pull the bird using a tweezers. Put the batter-
ies and the cuckoo will work perfectly.
Sometimes may happen that, because of an incorrect movement of the hands by the operator, the bird 
does not sing exactly on the hour. To fix the problem do the following: remove the batteries. Turn the 
hands until it will mark exactly 12:00. Then turn the minute hand until you hear a click that surely will 
not match at 12:00. The minute hand is inserted by pressure, to remove it you have to pull gently 
upwards, perpendicularly to the dial. Once extracted should reinsert it into place on 12:00. Please try 
again to slowly turn the minute hand and you should hear the click at 1:00. If you hear the click in a 
different position repeat the operation until you hear it exactly at 1:00 or 2:00 and so on. The clock now 
will sing properly.