Enabling Devices Skin Massager 3123 User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Skin Massager #3123
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Soft brush with adjustable vibration!
A wonderful massager with a soft brush, adjustable vibration, and a
tactile shaped handle for easy gripping. Just use the included
screwdriver to adjust the amount of vibration to help desensitize the
user. Size: 4½"L x 3"W x 2"D. Requires 1 AA Battery. Weight: ¼ lb.
Please Note: This product is not returnable due to sanitary
Please Note: This product is not returnable due to sanitary Please Note: This product is not returnable due to sanitary
Please Note: This product is not returnable due to sanitary
reasons
reasonsreasons
reasons noted by OSHA standards.
noted by OSHA standards.noted by OSHA standards.
noted by OSHA standards.
Operation:
Operation:Operation:
Operation:
1. The Skin Massager requires 1 AA Battery to operate. Turn the unit
over and remove the Velcro attached brush to reveal the battery
compartment. Observing polarity, install 1 AA size battery (Not
included into the holder. Use alkaline batteries only (e.g. Duracell
or Energizer brand . Do not use rechargeable batteries or any
other type of batteries because they supply lower voltage and the
unit will not perform properly.
2. Replace brush and press firmly to secure the brush in place. To
turn the vibration ON depress the ON/OFF push button located on
the brush side of the massager. Once you have turned the
vibration on you can now adjust its intensity with the included
screwdriver. Opposite the ON/OFF switch is a small recessed
flathead screw, turning the screw clockwise increases the
vibration counterclockwise decreases it.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: Skin Massager does not function correctly.
Action #1:
Action #1: Action #1:
Action #1: Replace the battery paying close attention to proper
battery polarity.
Action #2:
Action #2:Action #2:
Action #2: Make sure that the vibration is turned up enough for it to
be felt.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
If you will not be using Skin Massager for an extended amount of time,
we recommend removing the battery.
The Skin Massager can be wiped clean with any mild household multi-
purpose, non-abrasive sanitizer and disinfectant.
Do not use abrasive cleaners, as they will scratch the surface of
Do not use abrasive cleaners, as they will scratch the surface of Do not use abrasive cleaners, as they will scratch the surface of
Do not use abrasive cleaners, as they will scratch the surface of
the unit.
the unit.the unit.
the unit.
Do not submerge the unit, as it will damage the electrical
Do not submerge the unit, as it will damage the electrical Do not submerge the unit, as it will damage the electrical
Do not submerge the unit, as it will damage the electrical
components.
components.components.
components.
Rev
Rev Rev
Rev 5
55
5/1
/1/1
/1/1
/1/1
/17
77
7