Enabling Devices 1151 User manual

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST
1-800-832-8697
[e-mail]
Tubular Vibrator #1151 (Adapted) &
1151A (Unadapted)
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. [phone] / Fax [phone]
Toll Free 800.832.8697
www.enablingdevices.com

Vibrotactile feedback!
Vibrotactile feedback!Vibrotactile feedback!
Vibrotactile feedback!
This flexible, 2-speed vibrator is switch activated and can be
wrapped around almost any part of the body to provide enjoyable
vibrotactile feedback. Size: 30½"L x 3"D. Adapted version requires
Capability Switch. Both versions require 4 AA Batteries. Weight: 1¼
lbs.
Operation:
Operation:Operation:
Operation:
1. To install the 4 AA batteries, you must unzip each end cap on the
tube. Next open up each of the battery compartment doors and
install 2 AA batteries in each end paying close attention to
proper (+ and (- polarity. When finished replace battery covers
and zip closed. Please Note:
Please Note:Please Note:
Please Note: Alkaline batteries must be used
(e.g. Duracell or Energizer brand Do not use rechargeable or
heavy duty batteries as they will not work as well with this
device. Never mix old and new batteries together.
2. To use with an external switch (1151 model only
1151 model only1151 model only
1151 model only , first set the
Off, Low and High setting to Low or High by pressing the rocker
switch to the desired speed. Connect the Tubular Vibrator to any
external capability switch (not included via the cord jack located
at the end of the tube. Tubular Vibrator is equipped with a 1/8"
female mono jack for use with external capability switches that
have a 1/8" mono plug. Make sure you have your switch
plugged in all the way. There should be no gaps.
3. Actuate your capability switch and Tubular Vibrator will gently
vibrate. Once you release your external capability switch, Tubular
Vibrator will turn off. For users who cannot maintain pressing on
a switch but still want to control the Tubular Vibrator, you can
add out No. 605 Switch modifier to convert their switch into an
ON/OFF or Timed switch.
4. When you are finished using Tubular Vibrator turn the On/Off
switch to Off. If Tubular Vibrator is not going to be used for a long
period of time, e.g. one month or longer, we recommend
removing the batteries during storage to prevent battery drain or
leakage, which can cause damage to the Tubular Vibrator.
5. For the U
UU
Unadapted Tubular Vibrator Model 1151A
nadapted Tubular Vibrator Model 1151Anadapted Tubular Vibrator Model 1151A
nadapted Tubular Vibrator Model 1151A using the
built in High/Off/Low rocker switch to control the unit, setting it
to Low or High vibration will keep the Tubular Vibrator running at
that intensity until the rocker switch is set to Off.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem: Problem:
Problem: The Tubular Vibrator does not activate.
Action #
Action #Action #
Action #1:
1: 1:
1: Make sure that all batteries are installed following proper
(+ and (- polarity.
Action #2:
Action #2:Action #2:
Action #2: Replace the batteries with new alkaline batteries (E.G
Duracell or Energizer Brand .
Action #3
Action #3Action #3
Action #3:
::
: Do not use rechargeable or heavy duty batteries.
Action
Action Action
Action #4:
#4:#4:
#4: For 1151 adapted model make sure your switch is
working with another device to rule the Tubular Vibrator as the
source of the problem.
Care of Unit:
Care of Unit:Care of Unit:
Care of Unit:
The Tubular Vibrator is surface washable only; it can be wiped clean
with a damp cloth.
Do not sub
Do not subDo not sub
Do not submerge
mergemerge
merge the unit, as it will damage the contents and the
electrical components.
Do not use abrasive cleaners,
Do not use abrasive cleaners,Do not use abrasive cleaners,
Do not use abrasive cleaners, as they will scratch the surface of
the unit.
Rev
Rev Rev
Rev 2
22
2/
//
/22
2222
22/17
/17/17
/17