Enclume Pr37 Instruction manual

PR37-Premier Reversible Arch Rack

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

2 – Ceiling Screw Hooks

2 – 2” 'S' Hooks

Toggle Kit

Components included:

1 – Rack Body

2 – Hanging Arms

12 – Straight Pot Hooks - WSPHS

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate quality,

design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Rack Assembly

1) Place rack body on a firm surface.

2) Locate the hanging arms. Connect arms to the rack body by placing the ends under the appropriate cross bars as shown in the

picture.

3) Measure and mark the location for the two ceiling screw hooks on the ceiling to hold rack hanging arms.

4) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the

rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack

directly into wood joists you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand

manufacturer recommendations for weight limits included in the instructions in the Toggler kit.

5) Using the 'S' hooks provided hang the rack by hooking one end of the 'S' hook over the arm and the other end over the ceiling

screw hook that has been anchored securely into solid wood. Repeat process for other side.

6) If at any time you wish to reverse the rack, simply turn it over and repeat above. It is best to hang your pots on the crossbars to

prevent sliding.

It is important that your rack is assembled AND installed correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20

days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by