Enclume Pr11 Instruction manual

PR11 - CEILING BAR

Enclosed you will find everything needed for the assembly

and use of your storage rack. Two people make assembly

and installation easier. The parts and hardware included are:

Hardware included:

2 – Ceiling Screw Hooks

Toggle Kit

Components included:

1 – Rolled end bar

2 – Vertical Bar

2 – C-Ring

2 – U Clamp

2 – Pins

12 – Angled Pot Hooks – 54” Rack

12 – Angled Pot Hooks – 48” Rack

6 – Angled Pot Hooks – 36” Rack

See reverse side for ASSEMBLY AND INSTALLATION INSTRUCTIONS

Thank you for choosing Enclume!

Enclume racks are the ultimate in

quality, design, strength and function.

WARNING: READ ALL OF THE

INSTRUCTIONS BEFORE

ASSEMBLING AND USING YOUR

RACK

If you need help, please call 1-877-ENCLUME

Enclume Design Products

24 Colwell Street, Port Hadlock, WA 98339

Phone 360-385-6100 Fax 360-385-6156

www.enclume.com

ASSEMBLY AND INSTALLATION INSTRUCTIONS

Rack Assembly

1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting.

2) We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the

rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack

directly into wood joists you may use the included DRYWALL anchors enclosed with your rack. See Toggler® brand

manufacturer recommendations for weight limits included in the instructions in the Toggler kitHang a C-Ring from each ceiling

screw hook and a vertical bar from each C-Ring.

3) Slip the U Clamps under the bar and hold the rack up to the vertical bars while your helper inserts the two pins through the U

Clamps and the vertical bars. Position the pin so that the slot “locks” into the vertical bar. Square up the unit. For stability, hang

your heaviest items in the middle of the rack between the vertical bars.

It is important that your rack is assembled correctly. If the unit is assembled or used

incorrectly, it could become unstable and collapse, possibly causing injury.

WARNING

Limited Warranty: This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall

be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the

warranty period and (2) customer returns the defective product to Enclume Design Products, 24 Colwell St., Port Hadlock, WA 98339, postage prepaid within 20

days following a return authorization number (which may be obtained by telephoning the number at the top of this instructions) being provided to the customer by