Endress+Hauser Picomag IO-Link User manual

Products Solutions Services
Operating Instructions
Picomag
IO-Link
Electromagnetic flowmeter
BA01697D/06/EN/06.22-00
71552010
2022-06-01
Valid as of version
01.01.zz (Device firmware)

Picomag IO-Link
2 Endress+Hauser
• Make sure the document is stored in a safe place such that it is always available when
working on or with the device.
• To avoid danger to individuals or the facility, read the "Basic safety instructions" section
carefully, as well as all other safety instructions in the document that are specific to
working procedures.
• The manufacturer reserves the right to modify technical data without prior notice. Your
Endress+Hauser Sales Center will supply you with current information and updates to
these instructions.

Picomag IO-Link Table of contents
Endress+Hauser 3
Table of contents
1 About this document ................ 5
1.1 Document function ..................... 5
1.2 Symbols used .......................... 5
1.2.1 Safety symbols .................. 5
1.2.2 Electrical symbols ................ 5
1.2.3 Communication-specific symbols ..... 5
1.2.4 Symbols for certain types of
information .................... 6
1.2.5 Symbols in graphics ............... 6
1.3 Documentation ........................ 6
1.4 Registered trademarks ................... 6
2 Basic safety instructions ............ 8
2.1 Requirements for the personnel ............ 8
2.2 Intended use .......................... 8
2.3 Workplace safety ....................... 8
2.4 Operational safety ...................... 9
2.5 Product safety ......................... 9
2.6 IT security ............................ 9
2.7 Device-specific IT security ................. 9
2.7.1 Access via the SmartBlue app ........ 9
2.7.2 Protecting access via a password ..... 9
2.7.3 Access via Bluetooth® wireless
technology .................... 10
3 Incoming acceptance and product
identification ..................... 11
3.1 Incoming acceptance ................... 11
3.2 Product identification ................... 11
3.2.1 Symbols on measuring device ...... 12
4 Storage and transport ............. 13
4.1 Storage conditions ..................... 13
4.2 Transporting the product ................ 13
4.3 Packaging disposal ..................... 13
5 Mounting ......................... 14
5.1 Mounting requirements ................. 14
5.1.1 Mounting position ............... 14
5.2 Mounting the measuring device ........... 14
6 Electrical connection .............. 16
6.1 Electrical safety ....................... 16
6.2 Connecting requirements ................ 16
6.2.1 Requirements for connecting cable ... 16
6.2.2 Pin assignment, device plug ........ 16
6.3 Connecting the measuring device .......... 19
6.4 Post-connection check .................. 19
7 Operation options ................. 20
7.1 Access to the operating menu via the
SmartBlue app ........................ 20
8 System integration ................ 21
8.1 Overview of device description files ......... 21
8.2 Device master file ..................... 21
9 Commissioning .................... 22
9.1 Switching ON the measuring device ........ 22
9.2 Overview of the operating menu ........... 22
9.3 Configuring the measuring device .......... 22
9.3.1 Identification .................. 22
9.3.2 Configuring system units .......... 22
9.3.3 Setting the installation direction and
measurement .................. 23
9.3.4 Configuring the IO modules ........ 24
9.3.5 Totalizer ...................... 29
9.3.6 Configuring the display ........... 30
9.3.7 Data management ............... 31
9.3.8 Security ...................... 31
9.4 Diagnostics .......................... 32
9.5 System ............................. 32
10 Operation ......................... 33
10.1 Offline quick view of configuration ........ 33
11 Diagnostics and troubleshooting ... 35
11.1 General troubleshooting ................. 35
11.2 Diagnostic information on local display ...... 36
11.2.1 Diagnostic message .............. 36
11.3 Overview of diagnostic events ............. 37
11.4 Device information .................... 37
11.5 Firmware history ..................... 38
12 Accessories ....................... 39
13 Technical data .................... 41
13.1 Input ............................... 41
13.2 Output ............................. 41
13.3 Power supply ......................... 41
13.4 Performance characteristics .............. 41
13.5 Installation .......................... 42
13.6 Environment ......................... 42
13.7 Process ............................. 42
13.8 Mechanical construction ................ 43
13.9 Operability .......................... 45
13.10 Certificates and approvals ............... 46

Table of contents Picomag IO-Link
4 Endress+Hauser
14 Appendix ......................... 47
14.1 Radio approvals ....................... 47
14.1.1 Argentina ..................... 47
14.1.2 Brazil ........................ 47
14.1.3 Europe ....................... 47
14.1.4 India ......................... 47
14.1.5 Indonesia ..................... 48
14.1.6 Canada and United States ......... 48
14.1.7 Mexico ....................... 48
14.1.8 Republic of Korea ............... 49
14.1.9 Singapore ..................... 49
14.1.10 Taiwan ....................... 49
14.1.11 Thailand ...................... 49
14.1.12 United Arab Emirates ............ 50
14.1.13 Other countries ................. 50
14.2 IO-Link process data ................... 51
14.2.1 Data structure .................. 51
14.2.2 Diagnostic information ........... 51
14.3 IO-Link ISDU parameter list .............. 52
Index .................................. 59

Picomag IO-Link About this document
Endress+Hauser 5
1 About this document
1.1 Document function
These Operating Instructions contain all the information that is required in various phases
of the life cycle of the device: from product identification, incoming acceptance and
storage, to mounting, connection, operation and commissioning through to
troubleshooting, maintenance and disposal.
1.2 Symbols used
1.2.1 Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in
serious or fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
serious or fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in
minor or medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not result in
personal injury.
1.2.2 Electrical symbols
Symbol Meaning
Direct current
Ground connection
A grounded terminal which, as far as the operator is concerned, is grounded via a
grounding system.
1.2.3 Communication-specific symbols
Symbol Meaning
Bluetooth®
Wireless data transmission between devices over a short distance.
®IO-Link
Communications system for connecting intelligent sensors and actuators to an
automation system. In the IEC 61131-9 standard, IO-Link is standardized under the
name "Single-drop digital communication interface for small sensors and actuators
(SDCI)".

About this document Picomag IO-Link
6 Endress+Hauser
1.2.4 Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that are permitted.
Preferred
Procedures, processes or actions that are preferred.
Forbidden
Procedures, processes or actions that are forbidden.
Tip
Indicates additional information.
Reference to documentation
A
Reference to page
Reference to graphic
Notice or individual step to be observed
1.
,
2.
,
3.
… Series of steps
Result of a step
1.2.5 Symbols in graphics
Symbol Meaning
1, 2, 3, ... Item numbers
A, B, C, ... Views
1.3 Documentation
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The W@M Device Viewer: Enter the serial number of the measuring device
(www.endress.com/deviceviewer)
• The Endress+Hauser Operations App: Enter the serial number of the measuring
device or scan the 2-D matrix code on the measuring device.
1.4 Registered trademarks
®
Is a registered trademark. It may only be used in conjunction with products and services by
members of the IO-Link Community or by non-members who hold an appropriate license.
For more specific guidelines on use, refer to the IO-Link Community rules on:
www.io.link.com.
Bluetooth® wireless technology
®
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth
SIG, Inc. and any use of such marks by Endress+Hauser is under license.
Apple®
Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in
the U.S. and other countries. App Store is a service mark of Apple Inc.

Picomag IO-Link About this document
Endress+Hauser 7
Android®
Android, Google Play and the Google Play logo are trademarks of Google Inc.

Basic safety instructions Picomag IO-Link
8 Endress+Hauser
2 Basic safety instructions
2.1 Requirements for the personnel
The personnel for installation, commissioning, diagnostics and maintenance must fulfill
the following requirements:
‣Trained, qualified specialists must have a relevant qualification for this specific function
and task.
‣Are authorized by the plant owner/operator.
‣Are familiar with federal/national regulations.
‣Before starting work, read and understand the instructions in the manual and
supplementary documentation as well as the certificates (depending on the
application).
‣Follow instructions and comply with basic conditions.
The operating personnel must fulfill the following requirements:
‣Are instructed and authorized according to the requirements of the task by the facility's
owner-operator.
‣Follow the instructions in this manual.
2.2 Intended use
Application and media
The measuring device described in this manual is intended only for the flow measurement
of liquids with a minimum conductivity of 10 µS/cm.
To ensure that the measuring device remains in proper condition for the operation time:
‣Use the measuring device only for media to which the process-wetted materials have
an adequate level of resistance.
Incorrect use
Non-designated use can compromise safety. The manufacturer is not liable for damage
caused by improper or non-designated use.
LWARNING
Danger of breakage due to corrosive or abrasive fluids and ambient conditions!
‣Verify the compatibility of the process fluid with the sensor material.
‣Ensure the resistance of all fluid-wetted materials in the process.
‣Keep within the specified pressure and temperature range.
Residual risks
LWARNING
If the temperature of the media or electronics unit is high or low, this may cause the
surfaces of the device to become hot or cold. This poses a risk of burns or frostbite!
‣In the case of hot or cold medium temperatures, install appropriate protection against
contact.
2.3 Workplace safety
For work on and with the device:
‣Wear the required personal protective equipment according to national regulations.
For welding work on the piping:
‣Do not ground the welding unit via the measuring device.

Picomag IO-Link Basic safety instructions
Endress+Hauser 9
2.4 Operational safety
Risk of injury!
‣Operate the device in proper technical condition and fail-safe condition only.
‣The operator is responsible for interference-free operation of the device.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet
state-of-the-art safety requirements, has been tested, and left the factory in a condition in
which it is safe to operate.
It meets general safety standards and legal requirements. It also complies with the EU
directives listed in the device-specific EU Declaration of Conformity. Endress+Hauser
confirms this by affixing the CE mark to the device.
Furthermore, the device meets the legal requirements of the applicable UK regulations
(Statutory Instruments). These are listed in the UKCA Declaration of Conformity along
with the designated standards.
By selecting the order option for UKCA marking, Endress+Hauser confirms a successful
evaluation and testing of the device by affixing the UKCA mark.
Contact address Endress+Hauser UK:
Endress+Hauser Ltd.
Floats Road
Manchester M23 9NF
United Kingdom
www.uk.endress.com
2.6 IT security
Our warranty is valid only if the device is installed and used as described in the Operating
Instructions. The device is equipped with security mechanisms to protect it against any
inadvertent changes to the settings.
IT security measures, which provide additional protection for the device and associated
data transfer, must be implemented by the operators themselves in line with their security
standards.
2.7 Device-specific IT security
2.7.1 Access via the SmartBlue app
Two access levels (user roles) are defined for the device: the Operator user role and the
Maintenance user role. The Maintenance user role is the default setting.
If a user-specific access code is not defined (in the Set access code parameter), the default
setting 0000 continues to apply and the Maintenance user role is automatically enabled.
The device's configuration data are not write-protected and can be edited at all times.
If a user-specific access code has been defined (in the Set access code parameter), all the
parameters are write-protected and the device is accessed with the Operator user role. The
previously defined access code must first be entered again before the Maintenance user
role is enabled and all the parameters can be write-accessed.
2.7.2 Protecting access via a password
Different passwords are available to protect write access to the device parameters or access
to the device via the Bluetooth® interface.

Basic safety instructions Picomag IO-Link
10 Endress+Hauser
• User-specific access code
Protect write access to the device parameters via the SmartBlue app
• Bluetooth key
The password protects a connection between an operating device (e.g. smartphone,
tablet) and the device via the Bluetooth® interface.
General notes on the use of passwords
• The access code and Bluetooth key supplied with the device should be changed during
commissioning.
• Follow the general rules for generating a secure password when defining and managing
the access code or Bluetooth key.
• The user is responsible for the management and careful handling of the access code and
Bluetooth key.
2.7.3 Access via Bluetooth® wireless technology
Secure signal transmission via Bluetooth® wireless technology uses an encryption
method tested by the Fraunhofer Institute.
• The device is not visible via Bluetooth® wireless technology without the SmartBlue App.
• Only one point-to-point connection is established between the device and a smartphone
or tablet.
• The Bluetooth® wireless technology interface can be disabled via SmartBlue.