Endress+Hauser BT10 Installation and user guide

06/05/2018
INTERNAL
How can I upgrade my installed radar base?
Bluetooth for FMR5x, FMR6x and FMP5x
HART 7 FW 01.03.zz or higher
Device revision 04
HART 7 FW 01.02.zz or higher
Device revision 03
HART 7 FW 01.00.zz or higher
Device revision 01
FMP5x, FMR5x or FMR6x with HART 7 latest revision
Is my radar compatible? Is my local radio approval available?
Ask your local Endress+Hauser sales
center or representative.
Is the Ex approval for the radar updated
with Bluetooth?
Check the latest radar safety instruction (XA)
for the Bluetooth option
All checks done?
Order 71377355 Bluetooth Module (BT10) and install it in the radar and connect with the latest version
of the SmartBlue App
Has my radar a housing with glass window?
Slide 1 MTP/pw
IN01127F/00/EN/01.18

06/05/2018
INTERNAL
Bluetooth for FMR5x, FMR6x and FMP5x
Installing the Bluetooth module*
1.
2.
3.
1. Open housing and remove the display
2. Slide in the Bluetooth module in the CDI slot
3. Place the display in the upright position.
With the Bluetooth module the rotation of
the display is not possible.
*Only necessary when upgrading installed base
Slide 2 MTP/pw
IN01127F/00/EN/01.18