Endurance E5000 User manual

E5000
Endurance E5000 Elliptical
User Manual
v. E5000-072911

Table of Contents
Table of Contents.........................................................................................................................
Introduction....................................................................................................................................
Important Safety Information............................................................................................
Before You Begin..........................................................................................................................
Assembly...........................................................................................................................................
Console Overview.......................................................................................................................
Console Operation.....................................................................................................................
Monitoring Your Heart Rate.................................................................................................
Chest Strap Operation............................................................................................
Stretching & Flexibility.............................................................................................................
Warm-Up/Cool Down Exercises.........................................................................................
Maintenance...................................................................................................................................
Troubleshooting Guide...........................................................................................................
Reference Drawings...................................................................................................................
2
3
4
5
6 - 25
26 - 27
28 - 36
37 - 38
39
40
41 - 47
48
49
50 - 51
Endurance®continually seeks ways to improve the performance, specications and product manuals in order to ensure that only superior
products are released from our factories. Please take the time to carefully read through this manual thoroughly. Instructions contained in
this document are not intended to cover all details or variations possible with Endurance®equipment, or to cover every contingency that
may be met in conjunction with installation, operation, maintenance or troubleshooting of the equipment. Even though we have prepared
this manual with extreme care, neither the publisher nor the author can accept responsibility for any errors in, or omission from, the informa-
tion given. Should additional information be required, or should situations arise that are not covered by this manual, the matter should be
directed to your local Endurance®representative, or the Service Department at Endurance®in Forest Park, Illinois.
c
Copyright 2009. Endurance®. All rights reserved. Endurance®reserves the right to change design and specications when we feel it will
improve the product. Endurance®machines maintain several patented and patent pending features and designs. All rights reserved on
all design patents and utility patents.
2

Introduction
Congratulations!!
Thank you for purchasing your new Endurance®Elliptical.
With state-of-the-art technique, robust frame structure and superior ergonomic
design, Endurance®Ellipticals set a new standard for excellence. Endurance®El-
lipticals can improve your quality of life by keeping you t and healthy, increasing
your energy levels and enhancing your lifestyle.
Endurance®wants to ensure years of quality workouts with your new Elliptical so
we recommend that you read this manual carefully and thoroughly to fully under-
stand proper use and maintenance of this product. Retain this Owner’s Manual for
future reference.
Please use this Owner’s Manual to make sure that all parts have been included in
your shipment. When ordering parts, you must use the part number and descrip-
tion from this Owner’s Manual. Use only Endurance®replacement parts when ser-
vicing this machine. Failure to do so will void your warranty and could result in
personal injury.
For information about product operation or service, check out the ocial Endur-
ance®website at www.bodysolid.com/Home/Endurance-Cardioor contact an
authorized Endurance® dealer or an Endurance®factory-authorized service com-
pany or contact Endurance®Customer Tech Support at one of the following:
Toll Free: 1-800-556-3113
Phone: [phone]
Fax: [phone]
Hours: M-F 8:30-5:00 CST
E-Mail: [e-mail]
Or write to:
Endurance® Service Department
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
3

Important Safety Information
Save this Owner’s Manual!
Before beginning any tness program, you should obtain a complete physical
examination from your physician.
When using exercise equipment, you must always take basic precautions, including the
following:
mRead all instructions before using your Endurance®Elliptical.
These instructions are written to ensure your safety and to protect the unit.
m DO NOT allow children on or near the equipment.
mUse the equipment only for its intended purpose as described in this guide.
mDONOT use accessory attachments that are not recommended by the
manufacturer. Such attachments might cause injuries and will void your warranty.
mWear proper exercise clothing and shoes for your workout, no loose clothing.
m DO NOT use cleats, spikes or any other non-athletic shoes.
m DO NOT use this product while barefoot or wearing only socks.
mUse care when getting on or o the unit.
mDONOT overexert yourself or work to exhaustion. If you experience any pain such
aschest pains, nausea, dizziness, shortness of breath or abnormal symptoms, stop
your workout immediately and consult your physician before continuing.
mNever operate the unit when it has been dropped or damaged.
Return the equipment to a service center for examination and repair.
mNever drop or insert objects into any opening in the equipment.
mAlways check the unit for loose components before each use.
mDONOT turn pedals by hand.
mDONOT use the equipment outdoors or near water. It is imperative that your
Endurance®Elliptical is used in a climate controlled environment. If your elliptical
has been exposed to colder temperatures or to high moisture climates, it is strongly
recommended that the elliptical is brought to room temperature before use. Failure
touse this equipment in a climate controlled environment may cause premature
electronic failure.
m Unplug the elliptical before moving or cleaning it. DO NOT pull the power cord to
move this product. Keep the power cord away from heated surfaces.
m Endurance® recommends that a mat is placed under the unit to protect the oor or
carpet and for easier cleaning.
Endurance®Ellipticals are designed for your enjoyment. By following these precautions and
using common sense, you can have many safe and pleasurable hours of healthful exercise
with your Endurance®Elliptical.
4

Before You Begin
The Endurance® E5000 is carefully tested and inspected before shipment. We have
shipped the unit in several pieces that require assembly. Carefully unpack the unit in
a clear area and lay the pieces on the oor near the area where you plan to use the
equipment. Remove the packing material. Do not dispose of the packing material
until assembly is complete and the unit is working properly. Place the unit on a clean
level surface for assembly. Before assembling, the unit should be placed as close as
possible to its nal location. Be careful to assemble all components in the sequence
presented in this guide.
PERSONAL SAFETY DURING ASSEMBLY
mItis strongly recommended that a qualied dealer assemble the equipment.
Assistance is required.
mBefore beginning assembly, please take the time to read the instructions
thoroughly.
mRead each step in the assembly instructions and follow the steps in sequence.
Do not skip ahead. If you skip ahead, you may learn later that you have to
disassemble components and that you may have damaged the equipment
which will void the warranty.
mAssemble and operate the Endurance®Elliptical on a solid, level surface.
Locate the unit a few feet from the walls or furniture to provide easy access.
AFTER ASSEMBLY
Once the unit is assembled, you should check all functions to ensure correct opera-
tion. If you experience problems,  r st recheck the assembly instructions to locate
any possible errors made during assembly. If you are unable to correct the problem,
call the dealer from whom you purchased the machine or call Endurance®Customer
Tech Support Hot Line Toll Free at: 1-800-556-3113.
5

Step 1
                       
Sixteen M8x12 Allen Bolt
Sixteen M8 Washer
6

Step 1
7

Step 2
A. Connect the Left Handrail to the Mainframe using:
Three M6x16 Allen Bolt
Six M6 Washer
Three M6x50 Allen Bolt
B. Connect the Right Handrail to the Mainframe using:
Three M6x16 Allen Bolt
Six M6 Washer
Three M6x50 Allen Bolt
8

Step 2
9

Step 3
A. Connect Right Rocker Arm and secure using:
One M10 Washer
One M10 Spring Washer
One M10x20 Allen Head Bolt
B. Insert the End Cap into Right Rocker Arm as shown.
C. Connect Left Rocker Arm and secure using:
One M10 Washer
One M10 Spring Washer
One M10x20 Allen Head Bolt
D. Insert the End Cap into Left Rocker Arm as shown.
10

Step 3
11
Please Note:
When installing the left and right rocker arm please be
sure that the arm connected to the pivot point is pointed
downwards as shown in the picture above.
Pivot Point

Step 4
A. Lift Pedal and place Left Linkage onto Sleeve and align holes.
B. Secure Linkage to unit using:
Four M8*12 Hex Head Bolt
Four M8.4 Flat Washer
NOTE: Repeat for right linkage.
12

Step 4
13

Step 5
A. Secure Left Swing Arm by using:
One M10x82 Hex Head Bolt
One M10 Nut
B. Secure Right Swing Arm by using:
One M10x82 Hex Head Bolt
One M10 Nut
C. Install both Swing Arm Covers as shown using:
Two M5x12 Phillips Head Bolt
14

Step 5
15

Step 6
A. Remove Rear Cover from the unit by removing ve screws.
B. Attach Console Tube to Main Frame.
C. Slide Tube down into Main Frame.
D. Secure using:
Three M8*50 Hex Head Bolt
NOTE: Cable should extend through the bottom and the top of the
Console Tube.
16

Step 6
17

Step 7
A. Connect all cables to the console as shown.
B. Attach the Console to the Console tube using:
Four M5*12 Philip Head Screw
NOTE: Ensure that all wires are secure inside console.
Be careful not to pinch wires.
18

Step 7
19
屡 㽤 ⠽ ⇜ 㶰䓗 㹣 √
Ɫ⚜
㡴㦮
岼岗
㪰⺜
㫇⑕
摞㠇
嫷槱壤䚕
㧟役
㳮䲽
榅ↅ⚜䳀
₼㠖
喀㠖
榅
ↅ
偷
壮
帙㦃壤 ☮⻉⺇ 㦃㟈⻉⺇ 㦃㟈☮⥯ ⠽㝩壮䭋
㡴㦮
弯弻ⅉ
67(3
ˠˈ˃ˁˋˀ˄˅
ˇˣ˖
˖ˢˡ˦ˢ˟˘

Step 8
A. Attach Handlebars to Main Frame using:
Three M8*16 Hex Head Bolt
Three M8 Arc Washers
B. Repeat for other handlebar.
20