Eneo MEP-62M2812M0A User manual

EN
User Manual
1/2.9” HD Dome, Fixed,
Day&Night, 1920x1080,
2.8-12mm, Infrared, 12VDC, IP66
MEP-62M2812M0A

2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO
NOT INSERT ANY METALLIC OBJECTS THROUGH THE
VENTILATION GRILLS OR OTHER OPENINGS ON THE
EQUIPMENT.
CAUTION
EXPLANATION OF GRAPHICAL SYMBOLS
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

3
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC INFORMATION: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
CE COMPLIANCE STATEMENT
WARNING
This is a Class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

4
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2.Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed
Class 2 power source only.

5
Table of Contents
1 Introduction...................................................................................................................6
1.1 Features............................................................................................................................6
2 Installation and Configuration.....................................................................................7
2.1 Package Contents............................................................................................................7
2.2 Installing the Camera.......................................................................................................7
2.3 Setting the Camera..........................................................................................................8
2.4 Connections.....................................................................................................................9
2.5 OSD Menu Structure......................................................................................................10
3 OSD Menu....................................................................................................................11
3.1 Lens................................................................................................................................11
3.2 Exposure........................................................................................................................11
3.3 Backlight ........................................................................................................................13
3.4 White Balance................................................................................................................13
3.5 Day & Night ....................................................................................................................14
3.6 Image..............................................................................................................................14
3.7 Function .........................................................................................................................15
3.8 System............................................................................................................................17
3.9 AF....................................................................................................................................18
3.10 Exit................................................................................................................................18
4 Appendix .....................................................................................................................19
4.1 Specification ..................................................................................................................19
4.2 Dimension......................................................................................................................20

6
1 Introduction
1.1 Features
•1/2.9” SONY Exmor CMOS image sensor
•2.8 ~ 12mm motorized varifocal lens
•True D/N (Auto, Day, Night)
•28ea IR LEDs
•Auto exposure control (1/50,000 ~ x30 second)
•White balance control (AWB, ATW,AWC, Indoor, Outdoor, Manual)
•BLC (Back Light Compensation)
•HSBLC (High Suppress Back Light Compensation)
•Digital WDR (Wide Dynamic Range)
•DNR (Digital Nosie Reduction)
•4 Motion detection areas
•4 Privacy areas
•Defect Detections (Live DPC, White DPC, Black DPC)
•357˚ Pan range, 100˚ Tilt range
•12VDC for Camera
•Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.

7
2 Installation and Configuration
2.1 Package Contents
The package contains the following.
•Camera 1
•Instruction Manual (This Document) 1
•Template Sheet 1
•Accessory Kit 1
2.2 Installing the Camera
The camera is for use in surface or pendent mounting applications, and the mounting member
must be capable of supporting loads of up to 4.5 kg. (Pendent mounting must use pendent mount
accessory.)
The camera should be attached to a structural object, such as hard wood, wall stud or ceiling rafter
that supports the weight of the camera.
1. Make screw holes on the ceiling using the supplied mounting Template Sheet.
2. Fix the camera to the ceiling using supplied Anchors (4x) and Mounting Screws (4x).
CAUTION 1: A silicone rubber sealant must be applied to seal the housing to secure
waterproofing.
CAUTION 2: Do NOT try to pan and tilt the camera head manually by hand.
The camera pan/tilt gear can be damaged.

8
2.3 Setting the Camera
NOTE: Open the cover and change the video output setting.
The cover should be closed after video output setting.
S1
You can set video signal with S1.
Position Left Center Right
Video Signal AHD Output HD-TVI Output CVBS Output
NOTE: Please note that setup and PTZ control of the camera is only possible via Pelco C (UTC /
HD_TVI) protocol.

9
2.4 Connections
No. Connector Description
1 DC jack 12VDC
2 BNC jack VIDEO OUTPUT
The camera must be installed by qualified service personnel in accordance with all local and
federal electrical and building codes.
•Connecting Video Output connector
Connect the video output (BNC) connector to the video input.
•Connecting the Power
Connect power of 12VDC for the camera.
When using a 12VDC adapter, connect the positive (+) pole to the ‘+’ position and
the negative (-) pole to the ‘-’ position.
Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source
only.

10
2.5 OSD Menu Structure
MAIN MENU
LENS
EXPOSURE
BACKLIGHT
WHITE BAL
DAY&NIGHT
IMAGE
FUNCTION
SYSTEM
AF
EXIT
LENS
DC
MANUAL
EXPOSURE
SHUTTER
AGC
SENS-UP
BRIGHTNESS
D-WDR
DEFOG
RETURN
BACKLIGHT
OFF
BLC
HSBLC
WHITE BAL
AWB
ATW
AWCSET
INDOOR
OUTDOOR
MANAUL
DAY&NIGHT
AUTO
COLOR
B&W
IMAGE
SHARPNESS
LSC
D-EFFECT
RETURN
FUNCTION
DNR
MOTION
PRIVACY
DEFECT DET
RETURN
SYSTEM
CAM TITLE
MONITOR
VIDEO.OUT
LANGUAGE
RETURN
AF
AF MODE
ONE SHOT AF
TDN AF
LENS INIT
RETURN
EXIT
SAVE&END
RESET
NOT SAVE
NOTE: Please note that setup and PTZ control of the camera is only possible via Pelco C (UTC //
HD_TVI) protocol.

11
3 OSD Menu
3.1 Lens
DC, MANUAL
DC

Mode: Indoor, Outdoor

Min Shutter: 1/25(30)
Max Shutter: 1/50(60), FLK, 1/200(240), 1/400(480),
1/1000, 1/2000, 1/5000, 1/10000, 1/50000
Iris Speed: 0 to 15
MANUAL: Opens up Shutter in Exposure menu.
3.2 Exposure
SHUTTER (Only if lens is Manual mode):Auto, 1/25(30), 1/50(60), FLK, 1/200(240),
1/400(480), 1/1000, 1/2000, 1/5000, 1/10000, 1/50000, x2, x4, x6, x10, x15, x20, x25, x30
AGC: 1 to 15
SENS-UP: Off, Auto

Sens-up: x2, x4, x6, x10, x15, x20, x25, x30
BRIGHTNESS: 1 to 100
D-WDR: Auto, Off, On

Level: 0 to 8
DEFOG: Off, Auto

Pos/Size: Use up, down, right, left buttons to adjust both position and
size of area.
Gradation: 0 to 2
Default: Default Defog settings.
MAIN MENU
OUTDOOR MODE
DC LENS MODE

LENS
DC
MIN SHU.
1/25(30)
EXPOSURE

MODE OUTDOOR

MAX SHU. 1/2000
BACKLIGHT
OFF
IRIS SPEED
 8
RETURN
RET
WHITE BAL ATW RETURN RET

DAY&NIGHT
AUTO
IMAGE

FUNCTION

SYSTEM

AF

EXIT
SAVE&END
MAIN MENU
SENS-UP
EXPOSURE
LENS
DC
SENS-UP
x4
EXPOSURE

SHUTTER --- RETURN
RET
BACKLIGHT
OFF
AGC
 14
WHITE BAL
ATW
SENS-UP
AUTO
D-WDR
DAY&NIGHT
AUTO
BRIGHTNESS
 40
IMAGE

D-WDR
ON
LEVEL
 5
FUNCTION

DEFOG
OFF
RETURN
RET
SYSTEM

RETURN
RET
AF

DEFOG
EXIT SAVE&END

POS/SIZE

GRADATION
 0
DEFAULT

RETURN
RET

12

13
3.3 Backlight
OFF, BLC, HSBLC
BLC

Level: Low, Middle, High
Area: Use up, down, right, left buttons to adjust both position and size of area.
Default: Default BLC settings.
HSBLC

Select: Area1, Area2, Area3, Area4
Display: Off, On

Use up, down, right, left buttons to adjust both position and
size of area.
Black Mask: Off, On
Level: 0 to 100
Mode: All day, Night

AGC Level: 0 to 255
Default: Default HSBLC settings.
3.4 White Balance
AWB, ATW, AWCSET, INDOOR, OUTDOOR, MANUAL
AWC

SET

Push enter button to set the color balance.
MANUAL

Blue: 0 to 100
Red: 0 to 100
MAIN MENU
BLC
HLBLC
LENS
DC
EXPOSURE

LEVEL
MIDDLE
SELECT
AREA1
BACKLIGHT
OFF
AREA

DISPLAY
ON
WHITE BAL ATW DEFAULT

BLACK MASK ON
DAY&NIGHT
AUTO
RETURN
RET
LEVEL
 20
IMAGE

MODE
NIGHT
FUNCTION

DEFAULT

SYSTEM

RETURN
RET
AF

EXIT
SAVE&END
NIGHT MODE
AGC LEVEL
 150
RETURN
RET
MAIN MENU
MANUAL
LENS
DC
EXPOSURE

BLUE
 50
BACKLIGHT
OFF
RED
 50
WHITE BAL
ATW
RETURN
RET
DAY&NIGHT
AUTO
IMAGE

FUNCTION

SYSTEM

AF

EXIT
SAVE&END

14
3.5 Day & Night
AUTO, COLOR, B/W
AUTO

DN (CDS): 0 to 255
DN (Delay): 0 to 60
ND (CDS): 0 to 255
ND (Delay): 0 to 60
COLOR: Permanent color mode
B/W

Burst: Off, On
IR Smart: Off, On

Level: 0 to 15
Area: Use up, down, right, left buttons to adjust both position
and size of area.
3.6 Image
SHARPNESS: Off, Auto

Level: 0 to 10
Start AGC: 0 to 255
End AGC: 0 to 255
LSC: Off, On
D-EFFECT: Freeze: Off, On
Mirror: Off, Mirror, V-Flip, Rotate
Neg.Image: Off, On
MAIN MENU
D&N AUTO
B/W
LENS
DC
EXPOSURE

DN (CDS)
 205
BURST
OFF
BACKLIGHT
OFF
DN (DELAY)
 3
IR SMART
ON
WHITE BAL ATW N

D (CDS)

165 RETURN
RET
DAY&NIGHT
AUTO
ND (DELAY)
 3
IMAGE

RETURN
RET
FUNCTION

SYSTEM

AF

EXIT
SAVE&END
IR SMART
LEVEL
 8
AREA

RETURN
RET
MAIN MENU
SHARPNESS
IMAGE
LENS DC

LEVEL

6
EXPOSURE

SHARPNESS
AUTO
START AGC
 120
BACKLIGHT
OFF
LSC
ON
END AGC
 255
WHITE BAL
ATW
D-EFFECT

RETURN
RET
DAY&NIGHT
AUTO
RETURN
RET
IMAGE

D-EFFECT
FUNCTION

SYSTEM

FREEZE
OFF
AF

MIRROR OFF
EXIT
SAVE&END
NEG.IMAGE
OFF
RETURN
RET

15
3.7 Function
DNR
FUNCTION
2DNR
MIDDLE
DNR

3DNR
MIDDLE
MOTION OFF RETURN
RET
PRIVACY
OFF
DEFECT DET

MOTION
ALARM
RETURN
RET
SELECT
AREA1
VIEW TYPE
ALL
DISPLAY
ON
OSD VIEW ON
SENSITIVITY
 64
TIME
 3
COLOR
GREEN
RETURN
RET
TRANS.
1.00
ALARM

DEFAULT

RETURN RET

PRIVACY
SELECT
AREA1
DISPLAY
COLOR
COLOR
WHITE
TRANS.
1.00
DEFAULT

RETURN
RET
DEFECT DET
LIVE DPC
LIVE DPC
ON
AGC LEVEL
 16
WHITE DPC
ON
LEVEL
 100
BLACK DPC OFF RETURN
RET
RETURN
RET
WHITE DPC
CLOSE THE IRIS
POS/SIZE

START

THEN
DPC VIEW
OFF
LEVEL
 16
PRESS ENTER
AGC
 14
SENS-UP
x8
RETURN
RET
BLACK DPC
POS/SIZE

PRESS ENTER
START

DPC VIEW
OFF
LEVEL
 100
RETURN
RET
DNR: 2DNR: Off, Low, Middle, High
3DNR: Off, Low, Middle, High
MOTION: Off, On

Select: Area1, Area2, Area3, Area4
Display: Off / On

Use up, down, right, left buttons to adjust both
position and size of area.
Sensitivity: 0 to 100
Color: Green, Blue, White, Red
Transparency: 0.00, 0.25, 0.75, 1.00
Alarm: View Type: Off, Block, Outline, All
OSD View: Off, On
Time: 0 to 15
Default: Default Motion settings.

16
PRIVACY: Off, On

Select: Area1, Area2, Area3, Area4
Display: Off, Mosaic, Inversion, Color: Use up, down, right, left
buttons to adjust both position
and size of area.
Color: User, White, Black, Red, Blue, Yellow, Green, Cyan
Transparency: 0.25, 0.50, 0.75, 1.00
Default: Default privacy settings.
DEFECT DET: Live DPC: Off, On

AGC Level: 0 to 255
Level: 0 to 100
White DPC: Off, On

Pos/Size: Use up, down, right, left buttons to adjust
both position and size of area.
Start: Close the iris then press enter button.
DPC View: Off, On
Level: 0 to 60
AGC: 0 to 14
Sens-up: x2, x4, x6, x8, x10, x15, 20, x25, x30
Black DPC: Off / On

Pos/Size: Use up, down, right, left buttons to adjust
both position and size of area.
Start: Press enter button.
DPC View: Off / On
Level: 0 to 100

17
3.8 System
CAM TITLE: 15 alpha-numeric characters
MONITOR: LCDBlack Level: 0 to 60
Gamma: User, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90,
0.95, 1.00
Blue Gain: 0 to 100
Red Gain: 0 to 100
CRTBlue Gain: 0 to 100
Red Gain: 0 to 100
VIDEO OUT: PAL, NTSC
LANGUAGE: ENG (English), CHN1 (Chinese 1), CHN2 (Chinese 2), GER (German),
FRA (French), ITA (Italian), SPA (Spanish), POL (Polish), RUS (Russian),
POR (Portuguese), NED (Dutch), TUR (Turkish), KOR (Korean),
JPN (Japanese), HEB (Hebrew), ARB (Arabic)
MAIN MENU
CAMERA TITLE
SYSTEM
LENS
DC
0 1 2 3 4 5 6 7 8 9
EXPOSURE

CAM TITLE
OFF
A B C D E F G H I J K
BACKLIGHT
OFF
MONITOR
LCD
L M N O P Q R S T U V
WHITE BAL
ATW
VIDEO.OUT
PAL(NTSC)
W X Y Z ( )
DAY&NIGHT AUTO

LANGUAGE ENG

¯ ─ _ / = & : ~ , .
IMAGE

RETURN
RET
FUNCTION

CLR POS END

SYSTEM

AF

---------------
EXIT
SAVE&END
LCD
GAMMA
USER
BLUE GAIN
 50
RED GAIN
 50
RETURN
RET
CRT
BLUE GAIN
 50
RED GAIN
 50
RETURN
RET

18
3.9 AF
AF MODE: SEMI, AUTO, MANUAL
ONE SHOT AF: Will focus the camera.
TDN AF: Off / On: Will refocus when switching between color/B&W and B&W/color.
LENS INIT: Reinitializes the lens.
3.10 Exit
SAVE&END: Save and exit OSD menu.
RESET: Full factory reset
NOT SAVE: Exit the OSD without saving settings.
MAIN MENU
AF
LENS
DC
EXPOSURE

AF MODE
SEMI
BACKLIGHT
OFF
ONE SHOT AF

WHITE BAL
ATW
TDN AF
OFF
DAY&NIGHT
AUTO
LENS INIT

IMAGE

RETURN
RET
FUNCTION

SYSTEM

AF

EXIT
SAVE&END

19
4 Appendix
4.1 Specification
Model
MEP-63M2812M0A
IMAGE
Lens
Motorized Varifocal
2.8mm ~ 12mm, F1.4, DC IRIS
Angle of View
100° (H) ~ 35° (H)
Image Sensor
Type
1/2.9" SONY Exmor CMOS sensor
Pixels
1984 (H) x 1105 (V)
Min. Illumination
Color : 1.0 Lux @ F1.4, 50IRE
BW : 0 Lux (IR LED ON)
Scanning Mode
Progressive Scan
Wide Dynamic Range Digital WDR
Day and Night Mode
True D/N (Auto, Day, Night)
Noise Reduction
2DNR, 3DNR
Exposure Control
Auto, Manual
White Balance Control
AWB, ATW, AWC, Indoor, Outdoor, Manual
Back Light Compensation
BLC, HSBLC
Image Effect
Off, Freeze, Mirror, Negative Image
Shutter Speed
1/50,000 ~ x30 second
Pan/Tilt Range Pan: 357˚, Tilt: 100˚
IR Illuminator
28ea IR LEDs
VIDEO
Resolution
AHD or HD-TVI : 1080p @ 25/30fps
CVBS : 1000TVL
Video Output
Selectable: AHD or HD-TVI or CVBS
Defog
Yes
Motion Detection Area
4
Privacy Area
4
Defect Detection
Live DPC, White DPC, Black DPC
Auto Focus
Mode (Semi, Auto, Manual), One Shot AF, TDN AF
EXTERNAL IN/OUT
Power Input
DC Jack
Video Output BNC Jack
Control
Coaxial Communication
ETC
Operating Humidity
0 ~ 90%RH (Non-condensing)
Operating Temperature
-10°C ~ 50°C
Power Supply
12VDC
Power Consumption
600mA (7.2W)
Dimensions
See dimension drawing
Net Weight
Approx. 900g
Ingress Protection
IP66

20
4.2 Dimension